From 1d023876490c7a22f727967358450ab4e76a339b Mon Sep 17 00:00:00 2001
From: morgan <morgan@goodmeasuredesign.net>
Date: Tue, 27 Dec 2016 12:46:27 -0800
Subject: [PATCH] add yaac instructions to example

---
 examples/KISS/KISS.ino | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/examples/KISS/KISS.ino b/examples/KISS/KISS.ino
index cd74f82..573f55d 100644
--- a/examples/KISS/KISS.ino
+++ b/examples/KISS/KISS.ino
@@ -7,6 +7,16 @@
  * into the HamShield RF jack. Connect the Arduino to wall 
  * power and then to your computer via USB. Issue commands 
  * via the KISS equipment.
+ *
+ * To use the KISS example with YAAC:
+ * 1. open the configure YAAC wizard
+ * 2. follow the prompts and enter in your details until you get to the "Add and Configure Interfaces" window
+ * 3. Choose "Add Serial KISS TNC Port"
+ * 4. Choose the COM port for your Arduino
+ * 5. set baud rate to 9600 (default)
+ * 6. set it to KISS-only: with no command to enter KISS mode (just leave the box empty)
+ * 7. Use APRS protocol (default)
+ * 8. hit the next button and follow directions to finish configuration
 */
 
 #include <HamShield.h>