diff --git a/HamShield.cpp b/HamShield.cpp index d4e84ee..bc5a6c2 100644 --- a/HamShield.cpp +++ b/HamShield.cpp @@ -152,44 +152,86 @@ void HamShield::initialize() { tx_data = 0x03AC; // default is 0x32C I2Cdev::writeWord(devAddr, 0x09, tx_data); - tx_data = 0x4381; - I2Cdev::writeWord(devAddr, 0x0A, tx_data); + tx_data = 0x47E0; //0x43A0; // 0x7C20; // + I2Cdev::writeWord(devAddr, 0x0A, tx_data); // pga gain [10:6] tx_data = 0xA100; I2Cdev::writeWord(devAddr, 0x13, tx_data); tx_data = 0x5001; - I2Cdev::writeWord(devAddr, 0x1F, tx_data); + I2Cdev::writeWord(devAddr, 0x1F, tx_data); // GPIO7->VOX, GPIO0->CTC/DCS + + tx_data = 0x0031; I2Cdev::writeWord(devAddr, 0x31, tx_data); - tx_data = 0x44A5; - I2Cdev::writeWord(devAddr, 0x33, tx_data); - tx_data = 0x2B87; - I2Cdev::writeWord(devAddr, 0x34, tx_data); - tx_data = 0x060F; - I2Cdev::writeWord(devAddr, 0x41, tx_data); - tx_data = 0x0AFF; - I2Cdev::writeWord(devAddr, 0x44, tx_data); + tx_data = 0x0AF2; // + I2Cdev::writeWord(devAddr, 0x33, tx_data); // agc number + + // AGC table + tx_data = 0x0001; + I2Cdev::writeWord(devAddr, 0x7F, tx_data); + tx_data = 0x000C; + I2Cdev::writeWord(devAddr, 0x05, tx_data); + tx_data = 0x020C; + I2Cdev::writeWord(devAddr, 0x06, tx_data); + tx_data = 0x030C; + I2Cdev::writeWord(devAddr, 0x07, tx_data); + tx_data = 0x0324; + I2Cdev::writeWord(devAddr, 0x08, tx_data); + tx_data = 0x1344; + I2Cdev::writeWord(devAddr, 0x09, tx_data); + tx_data = 0x3F44; + I2Cdev::writeWord(devAddr, 0x0A, tx_data); + tx_data = 0x3F44; + I2Cdev::writeWord(devAddr, 0x0B, tx_data); + tx_data = 0x3F44; + I2Cdev::writeWord(devAddr, 0x0C, tx_data); + tx_data = 0x3F44; + I2Cdev::writeWord(devAddr, 0x0D, tx_data); + tx_data = 0x3F44; + I2Cdev::writeWord(devAddr, 0x0E, tx_data); + tx_data = 0x3F44; + I2Cdev::writeWord(devAddr, 0x0F, tx_data); + tx_data = 0xE0ED; + I2Cdev::writeWord(devAddr, 0x12, tx_data); + tx_data = 0xF2FE; + I2Cdev::writeWord(devAddr, 0x13, tx_data); + tx_data = 0x0A16; + I2Cdev::writeWord(devAddr, 0x14, tx_data); + tx_data = 0x2424; + I2Cdev::writeWord(devAddr, 0x15, tx_data); + tx_data = 0x2424; + I2Cdev::writeWord(devAddr, 0x16, tx_data); + tx_data = 0x2424; + I2Cdev::writeWord(devAddr, 0x17, tx_data); + tx_data = 0x0000; + I2Cdev::writeWord(devAddr, 0x7F, tx_data); + // end AGC table + + tx_data = 0x067F; //0x0601; //0x470F; + I2Cdev::writeWord(devAddr, 0x41, tx_data); // voice gain tx [6:0] + tx_data = 0x02FF; // using 0x04FF to avoid tx voice delay + I2Cdev::writeWord(devAddr, 0x44, tx_data); // tx gain [11:8] tx_data = 0x7F2F; I2Cdev::writeWord(devAddr, 0x47, tx_data); tx_data = 0x2C62; I2Cdev::writeWord(devAddr, 0x4F, tx_data); tx_data = 0x0094; - I2Cdev::writeWord(devAddr, 0x53, tx_data); + I2Cdev::writeWord(devAddr, 0x53, tx_data); // compressor update time (bits 6:0, 5.12ms per unit) tx_data = 0x2A18; I2Cdev::writeWord(devAddr, 0x54, tx_data); tx_data = 0x0081; I2Cdev::writeWord(devAddr, 0x55, tx_data); - tx_data = 0x0B02; - I2Cdev::writeWord(devAddr, 0x56, tx_data); + tx_data = 0x0B22; + I2Cdev::writeWord(devAddr, 0x56, tx_data); // sq detect time tx_data = 0x1C00; I2Cdev::writeWord(devAddr, 0x57, tx_data); tx_data = 0x800D; - I2Cdev::writeWord(devAddr, 0x58, tx_data); + I2Cdev::writeWord(devAddr, 0x58, tx_data); tx_data = 0x0EDD; - I2Cdev::writeWord(devAddr, 0x5A, tx_data); + I2Cdev::writeWord(devAddr, 0x5A, tx_data); // sq and noise detect times tx_data = 0x3FFF; - I2Cdev::writeWord(devAddr, 0x63, tx_data); - + I2Cdev::writeWord(devAddr, 0x63, tx_data); // pre-emphasis bypass + // calibration tx_data = 0x00A4; I2Cdev::writeWord(devAddr, 0x30, tx_data); delay(100); @@ -198,19 +240,26 @@ void HamShield::initialize() { delay(100); tx_data = 0x0006; I2Cdev::writeWord(devAddr, 0x30, tx_data); - - delay(25); - + delay(100); + + + // setup for 12.5kHz channel width + tx_data = 0x3D37; + I2Cdev::writeWord(devAddr, 0x11, tx_data); + tx_data = 0x0100; + I2Cdev::writeWord(devAddr, 0x12, tx_data); tx_data = 0x1100; I2Cdev::writeWord(devAddr, 0x15, tx_data); tx_data = 0x4495; - I2Cdev::writeWord(devAddr, 0x32, tx_data); + I2Cdev::writeWord(devAddr, 0x32, tx_data); // agc target power [11:6] + tx_data = 0x2B8E; + I2Cdev::writeWord(devAddr, 0x34, tx_data); tx_data = 0x40C3; - I2Cdev::writeWord(devAddr, 0x3A, tx_data); + I2Cdev::writeWord(devAddr, 0x3A, tx_data); // modu_det_sel sq setting tx_data = 0x0407; - I2Cdev::writeWord(devAddr, 0x3C, tx_data); + I2Cdev::writeWord(devAddr, 0x3C, tx_data); // pk_det_th sq setting [8:7] tx_data = 0x28D0; - I2Cdev::writeWord(devAddr, 0x3F, tx_data); + I2Cdev::writeWord(devAddr, 0x3F, tx_data); // rssi3_th sq setting tx_data = 0x203E; I2Cdev::writeWord(devAddr, 0x48, tx_data); tx_data = 0x1BB7; @@ -221,34 +270,6 @@ void HamShield::initialize() { I2Cdev::writeWord(devAddr, 0x65, tx_data); tx_data = 0xEB2E; I2Cdev::writeWord(devAddr, 0x66, tx_data); - - // AGC table - tx_data = 0x0001; - I2Cdev::writeWord(devAddr, 0x7F, tx_data); - tx_data = 0x0014; - I2Cdev::writeWord(devAddr, 0x06, tx_data); - tx_data = 0x020C; - I2Cdev::writeWord(devAddr, 0x07, tx_data); - tx_data = 0x0214; - I2Cdev::writeWord(devAddr, 0x08, tx_data); - tx_data = 0x030C; - I2Cdev::writeWord(devAddr, 0x09, tx_data); - tx_data = 0x0314; - I2Cdev::writeWord(devAddr, 0x0A, tx_data); - tx_data = 0x0324; - I2Cdev::writeWord(devAddr, 0x0B, tx_data); - tx_data = 0x0344; - I2Cdev::writeWord(devAddr, 0x0C, tx_data); - tx_data = 0x1344; - I2Cdev::writeWord(devAddr, 0x0D, tx_data); - tx_data = 0x1B44; - I2Cdev::writeWord(devAddr, 0x0E, tx_data); - tx_data = 0x3F44; - I2Cdev::writeWord(devAddr, 0x0F, tx_data); - tx_data = 0x0EEB; - I2Cdev::writeWord(devAddr, 0x12, tx_data); - tx_data = 0x0000; - I2Cdev::writeWord(devAddr, 0x7F, tx_data); delay(100); diff --git a/HamShield.h b/HamShield.h index 9b36e1d..52ae05b 100644 --- a/HamShield.h +++ b/HamShield.h @@ -8,7 +8,8 @@ #ifndef _HAMSHIELD_H_ #define _HAMSHIELD_H_ -#include "I2Cdev_rda.h" +//#include "I2Cdev_rda.h" +#include "I2Cdev.h" #include "SimpleFIFO.h" #include "AFSK.h" #include "DDS.h" diff --git a/I2Cdev_rda.cpp b/I2Cdev.cpp similarity index 99% rename from I2Cdev_rda.cpp rename to I2Cdev.cpp index 2cc4e2b..db173b5 100644 --- a/I2Cdev_rda.cpp +++ b/I2Cdev.cpp @@ -1,6 +1,6 @@ // I2Cdev library collection - Main I2C device class // Abstracts bit and byte I2C R/W functions into a convenient class -// 6/9/2012 by Jeff Rowberg +// 2013-06-05 by Jeff Rowberg // // Changelog: // 2013-05-06 - add Francesco Ferrara's Fastwire v0.24 implementation with small modifications @@ -43,28 +43,28 @@ THE SOFTWARE. =============================================== */ -#include "I2Cdev_rda.h" +#include "I2Cdev.h" #if I2CDEV_IMPLEMENTATION == I2CDEV_ARDUINO_WIRE #ifdef I2CDEV_IMPLEMENTATION_WARNINGS #if ARDUINO < 100 #warning Using outdated Arduino IDE with Wire library is functionally limiting. - #warning Arduino IDE v1.0.1+ with I2Cdev Fastwire implementation is recommended. + #warning Arduino IDE v1.6.5+ with I2Cdev Fastwire implementation is recommended. #warning This I2Cdev implementation does not support: #warning - Repeated starts conditions #warning - Timeout detection (some Wire requests block forever) #elif ARDUINO == 100 #warning Using outdated Arduino IDE with Wire library is functionally limiting. - #warning Arduino IDE v1.0.1+ with I2Cdev Fastwire implementation is recommended. + #warning Arduino IDE v1.6.5+ with I2Cdev Fastwire implementation is recommended. #warning This I2Cdev implementation does not support: #warning - Repeated starts conditions #warning - Timeout detection (some Wire requests block forever) #elif ARDUINO > 100 - #warning Using current Arduino IDE with Wire library is functionally limiting. - #warning Arduino IDE v1.0.1+ with I2CDEV_BUILTIN_FASTWIRE implementation is recommended. + /*#warning Using current Arduino IDE with Wire library is functionally limiting. + #warning Arduino IDE v1.6.5+ with I2CDEV_BUILTIN_FASTWIRE implementation is recommended. #warning This I2Cdev implementation does not support: - #warning - Timeout detection (some Wire requests block forever) + #warning - Timeout detection (some Wire requests block forever)*/ #endif #endif @@ -405,8 +405,7 @@ int8_t I2Cdev::readWords(uint8_t devAddr, uint8_t regAddr, uint8_t length, uint1 Wire.endTransmission(); } #elif (ARDUINO > 100) - //Serial.println("wires"); - // Arduino v1.0.1+, Wire library + // Arduino v1.0.1+, Wire library // Adds official support for repeated start condition, yay! // I2C/TWI subsystem uses internal buffer that breaks with large data requests @@ -415,8 +414,8 @@ int8_t I2Cdev::readWords(uint8_t devAddr, uint8_t regAddr, uint8_t length, uint1 for (uint8_t k = 0; k < length * 2; k += min(length * 2, BUFFER_LENGTH)) { Wire.beginTransmission(devAddr); Wire.write(regAddr); - Wire.endTransmission(false); -// Wire.beginTransmission(devAddr); + Wire.endTransmission(); + Wire.beginTransmission(devAddr); Wire.requestFrom(devAddr, (uint8_t)(length * 2)); // length=words, this wants bytes bool msb = true; // starts with MSB, then LSB diff --git a/I2Cdev_rda.h b/I2Cdev.h similarity index 95% rename from I2Cdev_rda.h rename to I2Cdev.h index 56850f2..46cbcf0 100644 --- a/I2Cdev_rda.h +++ b/I2Cdev.h @@ -1,8 +1,9 @@ // I2Cdev library collection - Main I2C device class header file // Abstracts bit and byte I2C R/W functions into a convenient class -// 6/9/2012 by Jeff Rowberg +// 2013-06-05 by Jeff Rowberg // // Changelog: +// 2015-10-30 - simondlevy : support i2c_t3 for Teensy3.1 // 2013-05-06 - add Francesco Ferrara's Fastwire v0.24 implementation with small modifications // 2013-05-05 - fix issue with writing bit values to words (Sasquatch/Farzanegan) // 2012-06-09 - fix major issue with reading > 32 bytes at a time with Arduino Wire @@ -43,14 +44,16 @@ THE SOFTWARE. =============================================== */ -#ifndef _I2CDEV_RDA_H_ -#define _I2CDEV_RDA_H_ +#ifndef _I2CDEV_H_ +#define _I2CDEV_H_ // ----------------------------------------------------------------------------- // I2C interface implementation setting // ----------------------------------------------------------------------------- +#ifndef I2CDEV_IMPLEMENTATION #define I2CDEV_IMPLEMENTATION I2CDEV_ARDUINO_WIRE //#define I2CDEV_IMPLEMENTATION I2CDEV_BUILTIN_FASTWIRE +#endif // I2CDEV_IMPLEMENTATION // comment this out if you are using a non-optimal IDE/implementation setting // but want the compiler to shut up about it @@ -76,7 +79,10 @@ THE SOFTWARE. #else #include "Arduino.h" #endif - #if I2CDEV_IMPLEMENTATION == I2CDEV_ARDUINO_WIRE + #if defined(CORE_TEENSY) && defined(__MK20DX256__) + #include + #define BUFFER_LENGTH 32 + #elif I2CDEV_IMPLEMENTATION == I2CDEV_ARDUINO_WIRE #include #endif #if I2CDEV_IMPLEMENTATION == I2CDEV_I2CMASTER_LIBRARY @@ -84,13 +90,19 @@ THE SOFTWARE. #endif #endif +#ifdef SPARK + #include + #define ARDUINO 101 +#endif + + // 1000ms default read timeout (modify with "I2Cdev::readTimeout = [ms];") #define I2CDEV_DEFAULT_READ_TIMEOUT 1000 class I2Cdev { public: I2Cdev(); - + static int8_t readBit(uint8_t devAddr, uint8_t regAddr, uint8_t bitNum, uint8_t *data, uint16_t timeout=I2Cdev::readTimeout); static int8_t readBitW(uint8_t devAddr, uint8_t regAddr, uint8_t bitNum, uint16_t *data, uint16_t timeout=I2Cdev::readTimeout); static int8_t readBits(uint8_t devAddr, uint8_t regAddr, uint8_t bitStart, uint8_t length, uint8_t *data, uint16_t timeout=I2Cdev::readTimeout); @@ -119,7 +131,7 @@ class I2Cdev { // Copyright(C) 2012 // Francesco Ferrara ////////////////////// - + /* Master */ #define TW_START 0x08 #define TW_REP_START 0x10 @@ -162,24 +174,24 @@ class I2Cdev { // Originally offered to the i2cdevlib project at http://arduino.cc/forum/index.php/topic,68210.30.html #define NBWIRE_BUFFER_LENGTH 32 - + class TwoWire { private: static uint8_t rxBuffer[]; static uint8_t rxBufferIndex; static uint8_t rxBufferLength; - + static uint8_t txAddress; static uint8_t txBuffer[]; static uint8_t txBufferIndex; static uint8_t txBufferLength; - + // static uint8_t transmitting; static void (*user_onRequest)(void); static void (*user_onReceive)(int); static void onRequestService(void); static void onReceiveService(uint8_t*, int); - + public: TwoWire(); void begin(); @@ -201,25 +213,25 @@ class I2Cdev { void onReceive(void (*)(int)); void onRequest(void (*)(void)); }; - + #define TWI_READY 0 #define TWI_MRX 1 #define TWI_MTX 2 #define TWI_SRX 3 #define TWI_STX 4 - + #define TW_WRITE 0 #define TW_READ 1 - + #define TW_MT_SLA_NACK 0x20 #define TW_MT_DATA_NACK 0x30 - + #define CPU_FREQ 16000000L #define TWI_FREQ 100000L #define TWI_BUFFER_LENGTH 32 - + /* TWI Status is in TWSR, in the top 5 bits: TWS7 - TWS3 */ - + #define TW_STATUS_MASK (_BV(TWS7)|_BV(TWS6)|_BV(TWS5)|_BV(TWS4)|_BV(TWS3)) #define TW_STATUS (TWSR & TW_STATUS_MASK) #define TW_START 0x08 @@ -250,20 +262,20 @@ class I2Cdev { #define TW_SR_STOP 0xA0 #define TW_NO_INFO 0xF8 #define TW_BUS_ERROR 0x00 - + //#define _MMIO_BYTE(mem_addr) (*(volatile uint8_t *)(mem_addr)) //#define _SFR_BYTE(sfr) _MMIO_BYTE(_SFR_ADDR(sfr)) - + #ifndef sbi // set bit #define sbi(sfr, bit) (_SFR_BYTE(sfr) |= _BV(bit)) #endif // sbi - + #ifndef cbi // clear bit #define cbi(sfr, bit) (_SFR_BYTE(sfr) &= ~_BV(bit)) #endif // cbi - + extern TwoWire Wire; #endif // I2CDEV_IMPLEMENTATION == I2CDEV_BUILTIN_NBWIRE -#endif /* _I2CDEV_RDA_H_ */ +#endif /* _I2CDEV_H_ */