diff --git a/examples/CrystalCalibration/CrystalCalibration.ino b/examples/CrystalCalibration/CrystalCalibration.ino index 5e7393b..7f00a1b 100644 --- a/examples/CrystalCalibration/CrystalCalibration.ino +++ b/examples/CrystalCalibration/CrystalCalibration.ino @@ -5,9 +5,11 @@ * Connect the HamShield to your Arduino. Screw the antenna * into the HamShield RF jack. Connect the Arduino to wall * power and then to your computer via USB. After uploading - * this program to your Arduino, open the Serial Monitor. - * Type 'h' into the bar at the top of the Serial Monitor - * and click the "Send" button for more instructions. + * this program to your Arduino, open the Serial Monitor. + * Make sure drop-down menu at the bottom of Serial Monitor + * is set to "Newline". Type 'h' into the bar at the top of + * the Serial Monitor and click the "Send" button for more + * instructions. */ #define DDS_REFCLK_DEFAULT 38400 diff --git a/examples/SerialTransceiver/SerialTransceiver.ino b/examples/SerialTransceiver/SerialTransceiver.ino index 5a0e843..bdf18ad 100644 --- a/examples/SerialTransceiver/SerialTransceiver.ino +++ b/examples/SerialTransceiver/SerialTransceiver.ino @@ -28,8 +28,8 @@ Power level P; Set the power amp level, 0 = lowest, 15 = highest Enable Offset R; 1 turns on repeater offset mode, 0 turns off repeater offset mode No Squelch S; Set the squelch level No TX Offset T; The absolute frequency of the repeater offset to transmit on in KHz No -RSSI ? Respond with the current receive level in - dBm (no sign provided on numerical response) No -Voice Level ^ Respond with the current voice level (VSSI) +RSSI ?; Respond with the current receive level in - dBm (no sign provided on numerical response) No +Voice Level ^; Respond with the current voice level (VSSI) Responses: