#if defined(ESP32) /* Copyright (c) 2004-2007, 2019, Sara Golemon * Copyright (c) 2010-2014, Daniel Stenberg * All rights reserved. * * Redistribution and use in source and binary forms, * with or without modification, are permitted provided * that the following conditions are met: * * Redistributions of source code must retain the above * copyright notice, this list of conditions and the * following disclaimer. * * Redistributions in binary form must reproduce the above * copyright notice, this list of conditions and the following * disclaimer in the documentation and/or other materials * provided with the distribution. * * Neither the name of the copyright holder nor the names * of any other contributors may be used to endorse or * promote products derived from this software without * specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY * OF SUCH DAMAGE. */ #include "libssh2_priv.h" #ifdef LIBSSH2_HAVE_ZLIB #include #undef compress /* dodge name clash with ZLIB macro */ #endif #include "comp.h" /* ******** * none * ******** */ /* * comp_method_none_comp * * Minimalist compression: Absolutely none */ static int comp_method_none_comp(LIBSSH2_SESSION *session, unsigned char *dest, size_t *dest_len, const unsigned char *src, size_t src_len, void **abstract) { (void) session; (void) abstract; (void) dest; (void) dest_len; (void) src; (void) src_len; return 0; } /* * comp_method_none_decomp * * Minimalist decompression: Absolutely none */ static int comp_method_none_decomp(LIBSSH2_SESSION * session, unsigned char **dest, size_t *dest_len, size_t payload_limit, const unsigned char *src, size_t src_len, void **abstract) { (void) session; (void) payload_limit; (void) abstract; *dest = (unsigned char *) src; *dest_len = src_len; return 0; } static const LIBSSH2_COMP_METHOD comp_method_none = { "none", 0, /* not really compressing */ 0, /* isn't used in userauth, go figure */ NULL, comp_method_none_comp, comp_method_none_decomp, NULL }; #ifdef LIBSSH2_HAVE_ZLIB /* ******** * zlib * ******** */ /* Memory management wrappers * Yes, I realize we're doing a callback to a callback, * Deal... */ static voidpf comp_method_zlib_alloc(voidpf opaque, uInt items, uInt size) { LIBSSH2_SESSION *session = (LIBSSH2_SESSION *) opaque; return (voidpf) LIBSSH2_ALLOC(session, items * size); } static void comp_method_zlib_free(voidpf opaque, voidpf address) { LIBSSH2_SESSION *session = (LIBSSH2_SESSION *) opaque; LIBSSH2_FREE(session, address); } /* libssh2_comp_method_zlib_init * All your bandwidth are belong to us (so save some) */ static int comp_method_zlib_init(LIBSSH2_SESSION * session, int compr, void **abstract) { z_stream *strm; int status; strm = LIBSSH2_CALLOC(session, sizeof(z_stream)); if(!strm) { return _libssh2_error(session, LIBSSH2_ERROR_ALLOC, "Unable to allocate memory for " "zlib compression/decompression"); } strm->opaque = (voidpf) session; strm->zalloc = (alloc_func) comp_method_zlib_alloc; strm->zfree = (free_func) comp_method_zlib_free; if(compr) { /* deflate */ status = deflateInit(strm, Z_DEFAULT_COMPRESSION); } else { /* inflate */ status = inflateInit(strm); } if(status != Z_OK) { LIBSSH2_FREE(session, strm); _libssh2_debug(session, LIBSSH2_TRACE_TRANS, "unhandled zlib error %d", status); return LIBSSH2_ERROR_COMPRESS; } *abstract = strm; return LIBSSH2_ERROR_NONE; } /* * libssh2_comp_method_zlib_comp * * Compresses source to destination. Without allocation. */ static int comp_method_zlib_comp(LIBSSH2_SESSION *session, unsigned char *dest, /* dest_len is a pointer to allow this function to update it with the final actual size used */ size_t *dest_len, const unsigned char *src, size_t src_len, void **abstract) { z_stream *strm = *abstract; int out_maxlen = *dest_len; int status; strm->next_in = (unsigned char *) src; strm->avail_in = src_len; strm->next_out = dest; strm->avail_out = out_maxlen; status = deflate(strm, Z_PARTIAL_FLUSH); if((status == Z_OK) && (strm->avail_out > 0)) { *dest_len = out_maxlen - strm->avail_out; return 0; } _libssh2_debug(session, LIBSSH2_TRACE_TRANS, "unhandled zlib compression error %d, avail_out", status, strm->avail_out); return _libssh2_error(session, LIBSSH2_ERROR_ZLIB, "compression failure"); } /* * libssh2_comp_method_zlib_decomp * * Decompresses source to destination. Allocates the output memory. */ static int comp_method_zlib_decomp(LIBSSH2_SESSION * session, unsigned char **dest, size_t *dest_len, size_t payload_limit, const unsigned char *src, size_t src_len, void **abstract) { z_stream *strm = *abstract; /* A short-term alloc of a full data chunk is better than a series of reallocs */ char *out; size_t out_maxlen = src_len; if(src_len <= SIZE_MAX / 4) out_maxlen = src_len * 4; else out_maxlen = payload_limit; /* If strm is null, then we have not yet been initialized. */ if(strm == NULL) return _libssh2_error(session, LIBSSH2_ERROR_COMPRESS, "decompression uninitialized");; /* In practice they never come smaller than this */ if(out_maxlen < 25) out_maxlen = 25; if(out_maxlen > payload_limit) out_maxlen = payload_limit; strm->next_in = (unsigned char *) src; strm->avail_in = src_len; strm->next_out = (unsigned char *) LIBSSH2_ALLOC(session, out_maxlen); out = (char *) strm->next_out; strm->avail_out = out_maxlen; if(!strm->next_out) return _libssh2_error(session, LIBSSH2_ERROR_ALLOC, "Unable to allocate decompression buffer"); /* Loop until it's all inflated or hit error */ for(;;) { int status; size_t out_ofs; char *newout; status = inflate(strm, Z_PARTIAL_FLUSH); if(status == Z_OK) { if(strm->avail_out > 0) /* status is OK and the output buffer has not been exhausted so we're done */ break; } else if(status == Z_BUF_ERROR) { /* the input data has been exhausted so we are done */ break; } else { /* error state */ LIBSSH2_FREE(session, out); _libssh2_debug(session, LIBSSH2_TRACE_TRANS, "unhandled zlib error %d", status); return _libssh2_error(session, LIBSSH2_ERROR_ZLIB, "decompression failure"); } if(out_maxlen > payload_limit || out_maxlen > SIZE_MAX / 2) { LIBSSH2_FREE(session, out); return _libssh2_error(session, LIBSSH2_ERROR_ZLIB, "Excessive growth in decompression phase"); } /* If we get here we need to grow the output buffer and try again */ out_ofs = out_maxlen - strm->avail_out; out_maxlen *= 2; newout = LIBSSH2_REALLOC(session, out, out_maxlen); if(!newout) { LIBSSH2_FREE(session, out); return _libssh2_error(session, LIBSSH2_ERROR_ALLOC, "Unable to expand decompression buffer"); } out = newout; strm->next_out = (unsigned char *) out + out_ofs; strm->avail_out = out_maxlen - out_ofs; } *dest = (unsigned char *) out; *dest_len = out_maxlen - strm->avail_out; return 0; } /* libssh2_comp_method_zlib_dtor * All done, no more compression for you */ static int comp_method_zlib_dtor(LIBSSH2_SESSION *session, int compr, void **abstract) { z_stream *strm = *abstract; if(strm) { if(compr) deflateEnd(strm); else inflateEnd(strm); LIBSSH2_FREE(session, strm); } *abstract = NULL; return 0; } static const LIBSSH2_COMP_METHOD comp_method_zlib = { "zlib", 1, /* yes, this compresses */ 1, /* do compression during userauth */ comp_method_zlib_init, comp_method_zlib_comp, comp_method_zlib_decomp, comp_method_zlib_dtor, }; static const LIBSSH2_COMP_METHOD comp_method_zlib_openssh = { "zlib@openssh.com", 1, /* yes, this compresses */ 0, /* don't use compression during userauth */ comp_method_zlib_init, comp_method_zlib_comp, comp_method_zlib_decomp, comp_method_zlib_dtor, }; #endif /* LIBSSH2_HAVE_ZLIB */ /* If compression is enabled by the API, then this array is used which then may allow compression if zlib is available at build time */ static const LIBSSH2_COMP_METHOD *comp_methods[] = { #ifdef LIBSSH2_HAVE_ZLIB &comp_method_zlib, &comp_method_zlib_openssh, #endif /* LIBSSH2_HAVE_ZLIB */ &comp_method_none, NULL }; /* If compression is disabled by the API, then this array is used */ static const LIBSSH2_COMP_METHOD *no_comp_methods[] = { &comp_method_none, NULL }; const LIBSSH2_COMP_METHOD ** _libssh2_comp_methods(LIBSSH2_SESSION *session) { if(session->flag.compress) return comp_methods; else return no_comp_methods; } #endif