Change 'Use Timer 2 Only' from compile option to software option

examples/SimpleSin/SimpleSin.ino

@@ -16,6 +16,7 @@ void setup() {
   digitalWrite(PWM_PIN, LOW);
   
   dds.start();
+  dds.startPhaseAccumulator(false);
   dds.playWait(600, 3000);
   dds.on();
   //dds.setAmplitude(31);

src/DDS.cpp

@@ -13,6 +13,7 @@ void DDS::start() {
 #ifdef DDS_PWM_PIN_3
   TCCR2A = (TCCR2A | _BV(COM2B1)) & ~(_BV(COM2B0) | _BV(COM2A1) | _BV(COM2A0)) |
          _BV(WGM21) | _BV(WGM20);
+  //TCCR2B = (TCCR2B & ~(_BV(CS22) | _BV(CS21))) | _BV(CS20) | _BV(WGM22);
   TCCR2B = (TCCR2B & ~(_BV(CS22) | _BV(CS21))) | _BV(CS20) | _BV(WGM22);
 #else
   // Alternatively, use pin 11
@@ -33,15 +34,30 @@ void DDS::start() {
   OCR2A = 0;
 #endif
   
-#ifdef DDS_USE_ONLY_TIMER2
+
+}
+
+void DDS::stop() {
+  // TODO: Stop the timers.
+  if(!timer2only){
+    TCCR1B = 0;
+  }
+  TCCR2B = 0;
+}
+
+void DDS::startPhaseAccumulator(bool use_only_timer_2 = false){
+    timer2only = use_only_timer_2;
+
+  if(timer2only){
     TIMSK2 |= _BV(TOIE2);
-#endif
+  }
 
   // Second, setup Timer1 to trigger the ADC interrupt
   // This lets us use decoding functions that run at the same reference
   // clock as the DDS.
   // We use ICR1 as TOP and prescale by 8
-/*  TCCR1B = _BV(CS10) | _BV(WGM13) | _BV(WGM12);
+  if(!timer2only){
+    TCCR1B = _BV(CS10) | _BV(WGM13) | _BV(WGM12);
     TCCR1A = 0;
     ICR1 = ((F_CPU / 1) / refclk) - 1;
     #ifdef DDS_DEBUG_SERIAL
@@ -60,15 +76,7 @@ void DDS::start() {
     DIDR0 |= _BV(0);
     ADCSRB = _BV(ADTS2) | _BV(ADTS1) | _BV(ADTS0);
     ADCSRA = _BV(ADEN) | _BV(ADSC) | _BV(ADATE) | _BV(ADIE) | _BV(ADPS2); // | _BV(ADPS0);    
-*/
   }
-
-void DDS::stop() {
-  // TODO: Stop the timers.
-#ifndef DDS_USE_ONLY_TIMER2
-  TCCR1B = 0;
-#endif
-  TCCR2B = 0;
 }
 
 // Set our current sine wave frequency in Hz
@@ -88,6 +96,8 @@ ddsAccumulator_t DDS::calcFrequency(unsigned short freq) {
       newStep = (1500.0 / (DDS_REFCLK_DEFAULT+DDS_REFCLK_OFFSET)) * pow(2,ACCUMULATOR_BITS);      
     } else if (freq == 600) {
       newStep = (600.0 / (DDS_REFCLK_DEFAULT+DDS_REFCLK_OFFSET)) * pow(2,ACCUMULATOR_BITS);      
+    } else {
+      newStep = pow(2,ACCUMULATOR_BITS)*freq / (refclk+refclkOffset);
     }
   } else {
     newStep = pow(2,ACCUMULATOR_BITS)*freq / (refclk+refclkOffset);

src/DDS.h

@@ -133,7 +133,7 @@ class DDS {
 public:
   DDS(): refclk(DDS_REFCLK_DEFAULT), refclkOffset(DDS_REFCLK_OFFSET),
     accumulator(0), running(false),
-    timeLimited(false), tickDuration(0), amplitude(255)
+    timeLimited(false), tickDuration(0), amplitude(255), timer2only(false)
     {};
 
   // Start all of the timers needed
@@ -142,6 +142,9 @@ public:
   const bool isRunning() { return running; };
   // Stop the DDS timers
   void stop();
+  // Start the phase accumulator
+  void startPhaseAccumulator(bool use_only_timer_2 = false);
+  bool isTimer2Only() { return timer2only; };
   
   // Start and stop the PWM output
   void on() {
@@ -214,6 +217,7 @@ public:
   void clockTick();
   
 private:
+  volatile bool timer2only;
   volatile bool running;
   volatile unsigned long tickDuration;
   volatile bool timeLimited;