2015-06-20 20:31:39 +00:00
# HamShield
2016-05-04 18:40:26 +00:00
2016-07-01 03:09:11 +00:00
The i2c-comms branch is not intended for use with a stock HamShield.
To use i2c communications with a HamShield 09 or above, you must first make several hardware changes to the board.
1. Remove R2
2. Short the pads of R17 (either with a wire or a low value resistor).
Then make sure that you pull the nCS pin correctly. Changing nCS changes the I2C address of the HamShield:
- nCS is logic high: A1846S_DEV_ADDR_SENHIGH 0b0101110
- nCS is logic low: A1846S_DEV_ADDR_SENLOW 0b1110001
2016-05-04 18:40:26 +00:00
2015-06-20 20:31:39 +00:00
HamShield Arduino Library and Example Sketches
2015-06-20 20:40:11 +00:00
This repository is meant to be checked out into your Arduino application's libraries folder. After reloading the application, the library and example sketches should be available for use.
2015-07-07 00:35:43 +00:00
For overview, help, tricks, tips, and more, check out the wiki:
https://github.com/EnhancedRadioDevices/HamShield/wiki
