Move not functioning examples to FixMe folder. Fix typos.

examples/FixMe/HAMBot/HAMBot.ino

@@ -0,0 +1,60 @@
+/* Hamshield
+ * Example: HAMBot
+ * Simple DTMF controlled HAM Radio Robot. You will need 
+ * seperate DTMF equipment as well as robot for this 
+ * example.
+ * Connect the HamShield to your Arduino. Screw the antenna 
+ * into the HamShield RF jack. Connect the Arduino to wall 
+ * power and then to your computer via USB. After uploading 
+ * this program to your Arduino, you can send commands from 
+ * your DTMF equipment using the following list: 
+ * '4' => turn robot left
+ * '6' => turn robot right
+ * '2' => move robot forward
+ * '5' => tell robot to send morse code identity 
+*/ 
+
+#include <ArduinoRobot.h> // include the robot library
+#include <HamShield.h>
+#include <SPI.h>
+
+#define PWM_PIN 3
+#define RESET_PIN A3
+#define SWITCH_PIN 2
+
+HamShield radio;
+
+void setup() {
+  // NOTE: if not using PWM out, it should be held low to avoid tx noise
+  pinMode(PWM_PIN, OUTPUT);
+  digitalWrite(PWM_PIN, LOW);
+  
+  // prep the switch
+  pinMode(SWITCH_PIN, INPUT_PULLUP);
+  
+  // set up the reset control pin
+  pinMode(RESET_PIN, OUTPUT);
+  digitalWrite(RESET_PIN, HIGH);
+  
+  Robot.begin();
+
+  radio.initialize();
+  radio.frequency(145510);
+}
+
+void loop() {
+   if(radio.waitForDTMF()) {                          // wait for a received DTMF tone
+    uint8_t command = radio.getLastDTMFDigit();       // get the last DTMF tone sent
+     if(command == '4') { Robot.turn(-90); }          // turn robot left
+     if(command == '6') { Robot.turn(90); }           // turn robot right
+     if(command == '2') { Robot.motorsWrite(-255,-255); delay(500); Robot.motorsWrite(255, 255); }  // move robot forward
+     if(command == '5') {                             // tell robot to send morse code identity 
+           if(radio.waitForChannel()) {               // wait for the user to release the transmit button
+              radio.setModeTransmit();                // turn on transmit mode
+              radio.morseOut("1ZZ9ZZ I AM HAMRADIO ROBOT");    // send morse code
+              radio.setModeReceive();                 // go back to receive mode on radio 
+           }
+     }
+   }
+}
+