Slight rearranging, and added comments to FM Beacon example sketch.
This commit is contained in:
parent
0126665e4c
commit
2d5deedf54
|
@ -1,44 +1,68 @@
|
|||
/*
|
||||
|
||||
Morse Code Beacon
|
||||
|
||||
Test beacon will transmit and wait 30 seconds.
|
||||
Beacon will check to see if the channel is clear before it will transmit.
|
||||
|
||||
|
||||
*/
|
||||
|
||||
// Include the HamSheild and Wire (I2C) libraries
|
||||
#include <HamShield.h>
|
||||
#include <Wire.h>
|
||||
|
||||
// Create a new instance of our HamSheild class, called 'radio'
|
||||
HamShield radio;
|
||||
|
||||
// Run our start up things here
|
||||
void setup() {
|
||||
// Set up the serial port at 9600 Baud
|
||||
Serial.begin(9600);
|
||||
Serial.println("starting up..");
|
||||
|
||||
// Send a quick serial string
|
||||
Serial.println("HamShield FM Beacon Example Sketch");
|
||||
|
||||
// Start the Wire (I2C) library
|
||||
Wire.begin();
|
||||
|
||||
// Query the HamShield for status information
|
||||
Serial.print("Radio status: ");
|
||||
int result = radio.testConnection();
|
||||
Serial.println(result,DEC);
|
||||
radio.initialize(); // setup radio
|
||||
radio.frequency(446000); // set to 70 cm call frequency
|
||||
Serial.println("Done with radio beacon setup.");
|
||||
|
||||
// Tell the HamShield to start up
|
||||
radio.initialize();
|
||||
|
||||
// Configure the HamShield to transmit and recieve on 446.000MHz
|
||||
radio.frequency(446000);
|
||||
|
||||
Serial.println("Radio Configured.");
|
||||
}
|
||||
|
||||
void loop() {
|
||||
if(radio.waitForChannel(30000,2000,-50)) { // wait up to 30 seconds for a clear channel, and then 2 seconds of empty channel
|
||||
Serial.println("Signal is clear -- Transmitting");
|
||||
radio.setModeTransmit(); // turn on the transmitter
|
||||
radio.morseOut("1ZZ9ZZ/B CN87 ARDUINO HAMSHIELD");
|
||||
radio.setModeReceive(); // turn off the transmitter (receive mode)
|
||||
Serial.print("TX Off");
|
||||
// We'll wait up to 30 seconds for a clear channel, requiring that the channel is clear for 2 seconds before we transmit
|
||||
if (radio.waitForChannel(30000,2000,-50)) {
|
||||
// If we get here, the channel is clear. Let's print the RSSI to the serial port as well.
|
||||
Serial.print("Signal is clear, RSSI: ");
|
||||
Serial.println(radio.readRSSI());
|
||||
|
||||
// Start transmitting by putting the radio into transmit mode.
|
||||
Serial.print("Transmitting... ");
|
||||
radio.setModeTransmit();
|
||||
|
||||
// Send a message out in morse code
|
||||
radio.morseOut("CALLSIGN LOCATOR ARDUINO HAMSHIELD");
|
||||
|
||||
// We're done sending the message, set the radio back into recieve mode.
|
||||
radio.setModeReceive();
|
||||
Serial.println("Done.");
|
||||
|
||||
// Wait 30 seconds before we send our beacon again.
|
||||
delay(30000);
|
||||
} else {
|
||||
} else {
|
||||
// If we get here, the channel is busy. Let's also print out the RSSI.
|
||||
Serial.print("The channel was busy. Waiting 10 seconds. RSSI: ");
|
||||
Serial.println(radio.readRSSI());
|
||||
|
||||
// Wait 10 seconds and check the channel again.
|
||||
delay(10000);
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
}
|
Loading…
Reference in New Issue