updated for HS05

examples/JustTransmit/JustTransmit.ino

@@ -3,9 +3,24 @@
 #include <HamShield.h>
 #include <Wire.h>
 
+#define PWM_PIN 3
+#define RESET_PIN A3
+#define SWITCH_PIN 2
+
 HamShield radio;
 
 void setup() {
+  // NOTE: if not using PWM out, it should be held low to avoid tx noise
+  pinMode(PWM_PIN, OUTPUT);
+  digitalWrite(PWM_PIN, LOW);
+  
+  // prep the switch
+  pinMode(SWITCH_PIN, INPUT_PULLUP);
+  
+  // set up the reset control pin
+  pinMode(RESET_PIN, OUTPUT);
+  digitalWrite(RESET_PIN, HIGH);
+  
   Wire.begin();
   Serial.begin(9600);
   Serial.println("If the sketch freezes at radio status, there is something wrong with power or the shield");