Fix examples to match Master branch.

examples/AFSK-SerialMessenger/AFSK-SerialMessenger.ino

@@ -43,7 +43,7 @@ void setup() {
   // turn on the radio
   digitalWrite(RESET_PIN, HIGH);
   
-  Serial.begin(115200);
+  Serial.begin(9600);
 
   radio.initialize();
   radio.frequency(145570);

examples/AX25Receive/AX25Receive.ino

@@ -29,7 +29,6 @@ void setup() {
   radio.initialize();
   radio.frequency(145010);
   radio.setSQOff();
-  I2Cdev::writeWord(A1846S_DEV_ADDR_SENLOW, 0x44, 0b11111111);
   Serial.println(F("Frequency"));
   delay(100);
   Serial.print(F("Squelch(H/L): "));

examples/FunctionalTest/FunctionalTest.ino

@@ -1,12 +1,15 @@
 /* Hamshield
- * Example: Fox Hunt
+ * Example: Functional Test
- * Plays a one minute tone at 10-13 minute intervals. Script 
+ * This is a simple example to demonstrate HamShield receive
- * will check to see if the channel is clear before it will 
+ * and transmit functionality.
- * transmit.
  * Connect the HamShield to your Arduino. Screw the antenna 
- * into the HamShield RF jack. Connect the Arduino to wall power and then 
+ * into the HamShield RF jack. Plug a pair of headphones into 
- * to your computer via USB. To test, set a HandyTalkie 
+ * the HamShield. Connect the Arduino to wall power and then 
- * to 438MHz. You should hear a one-minute tone every 10-13 minutes.
+ * to your computer via USB. After uploading this program to 
+ * your adruino, open the Serial Monitor. Serial Monitor will 
+ * describe what you should be expecting to hear from your 
+ * headphones. Tune a HandytTalkie to 446MHz to hear morse 
+ * code example.
 */
 
 #include <HamShield.h>

examples/Gauges/Gauges.ino

@@ -35,7 +35,7 @@ void setup() {
   digitalWrite(RESET_PIN, HIGH);
   
   analogReference(DEFAULT);
-  Serial.begin(115200);
+  Serial.begin(9600);
 
   Serial.print("Radio status: ");
   int result = radio.testConnection();

examples/QPSK63Transmit/QPSK63Transmit.ino

@@ -58,7 +58,7 @@ void sendChar(uint8_t c) {
   //PORTD &= ~_BV(2); // Diagnostic pin (D2)
 }
 
-char *string = "Why hello there, friend. Nice to meet you. Welcome to PSK31. 73, VE6SLP sk\r\n";
+char *string = "Why hello there, friend. Nice to meet you. Welcome to QPSK63. 73, VE6SLP sk\r\n";
 void loop() {
   int i;
   // put your main code here, to run repeatedly:

examples/SSTV/SSTV.ino

@@ -51,7 +51,7 @@ void setup() {
 
 
 void loop() {
-     if(radio.waitForChannel(1000,2000)) {        // Wait forever for calling frequency to open, then wait 2 seconds for breakers 
+     if(radio.waitForChannel(1000,2000, rssi)) {        // Wait forever for calling frequency to open, then wait 2 seconds for breakers 
        radio.setModeTransmit();                   // Turn on the transmitter
        delay(250);                               // Wait a moment
        radio.SSTVTestPattern(MARTIN1);            // send a MARTIN1 test pattern

examples/SerialTransceiver/SerialTransceiver.ino

@@ -89,7 +89,7 @@ void setup() {
   pinMode(RESET_PIN, OUTPUT);
   digitalWrite(RESET_PIN, HIGH);
   
-  Serial.begin(115200);
+  Serial.begin(9600);
   Serial.print(";;;;;;;;;;;;;;;;;;;;;;;;;;");
 
   int result = radio.testConnection();