update ctcss/cdcss and morse
This commit is contained in:
Morgan Redfield
parent
38f5a467ef
commit
c2a58487d3
|
|
@ -31,6 +31,7 @@ unsigned int morse_dot_millis = 100;
|
|||
/* morse code lookup table */
|
||||
// This is the Morse table in reverse binary format.
|
||||
// It will occupy 108 bytes of memory (or program memory if defined)
|
||||
|
||||
#define MORSE_TABLE_LENGTH 54
|
||||
#define MORSE_TABLE_PROGMEM
|
||||
#ifndef MORSE_TABLE_PROGMEM
|
||||
|
|
@ -681,154 +682,123 @@ uint16_t HamShield::getPABiasVoltage(){
|
|||
// Subaudio settings
|
||||
|
||||
|
||||
// recommended function for placing CTCSS tone on channel
|
||||
|
||||
// ctcss freq encoder
|
||||
void HamShield::setCtcssEncoder(float freq) {
|
||||
int dfreq = freq * 100; // Convert float into whole number (ctcss freq * 100)
|
||||
setCtcssFreq(dfreq); // program CTCSS frequency buffer
|
||||
HSwriteBitW(devAddr, A1846S_CTCSS_FREQ_PRG, 10, 1); // program CTCSS frequency buffer into CTCSS encoder (step 1)
|
||||
HSwriteBitW(devAddr, A1846S_CTCSS_FREQ_PRG, 9, 1); // program CTCSS frequency buffer into CTCSS encoder (step 2)
|
||||
}
|
||||
|
||||
// recommended function for detecting (and requiring) CTCSS to be on channel before audio is unmuted -- schedule remainder for deprecation
|
||||
|
||||
// ctcss freq decoder
|
||||
void HamShield::setCtcssDecoder(float freq) {
|
||||
int dfreq = freq * 100; // Convert float into whole number (ctcss freq * 100)
|
||||
setCtcssFreq(dfreq); // program CTCSS frequency buffer
|
||||
HSwriteBitW(devAddr, A1846S_CTCSS_FREQ_PRG, 10, 1); // program CTCSS frequency buffer into CTCSS encoder (step 1)
|
||||
HSwriteBitW(devAddr, A1846S_CTCSS_FREQ_PRG, 9, 1); // program CTCSS frequency buffer into CTCSS encoder (step 2)
|
||||
}
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
// TX and RX code
|
||||
/*
|
||||
Set code mode:
|
||||
Step1: set 58H[1:0]=11 set voice hpf bypass
|
||||
Step2: set 58H[5:3]=111 set voice lpf bypass and pre/de-emph bypass
|
||||
Step3 set 3CH[15:14]=10 set code mode
|
||||
Step4: set 1FH[3:2]=01 set GPIO code in or code out
|
||||
|
||||
TX code mode:
|
||||
Step1: 45H[2:0]=010
|
||||
|
||||
RX code mode:
|
||||
Step1: set 45H[2:0]=001
|
||||
Step2: set 4dH[15:10]=000001
|
||||
*/
|
||||
|
||||
// Ctcss/cdcss mode sel
|
||||
// x00=disable,
|
||||
// 001=inner ctcss en,
|
||||
// 010= inner cdcss en
|
||||
// 101= outer ctcss en,
|
||||
// 110=outer cdcss en
|
||||
// others =disable
|
||||
// 00000= disable,
|
||||
// 00001= det ctcss tone 1
|
||||
// 00010= det cdcss
|
||||
// 00100= det inverted ctcss
|
||||
// 01000= det ctcss tone 2 (unused in HS right now)
|
||||
// 10000= det phase shift
|
||||
void HamShield::setCtcssCdcssMode(uint16_t mode){
|
||||
HSwriteBitsW(devAddr, A1846S_SUBAUDIO_REG, A1846S_C_MODE_BIT, A1846S_C_MODE_LENGTH, mode);
|
||||
HSwriteBitsW(devAddr, A1846S_TX_VOICE_REG, A1846S_CTDCSS_DTEN_BIT, A1846S_CTDCSS_DTEN_LEN, mode);
|
||||
}
|
||||
uint16_t HamShield::getCtcssCdcssMode(){
|
||||
HSreadBitsW(devAddr, A1846S_SUBAUDIO_REG, A1846S_C_MODE_BIT, A1846S_C_MODE_LENGTH, radio_i2c_buf);
|
||||
HSreadBitsW(devAddr, A1846S_TX_VOICE_REG, A1846S_CTDCSS_DTEN_BIT, A1846S_CTDCSS_DTEN_BIT, radio_i2c_buf);
|
||||
return radio_i2c_buf[0];
|
||||
}
|
||||
void HamShield::setInnerCtcssMode(){
|
||||
setCtcssCdcssMode(1);
|
||||
|
||||
void HamShield::setDetPhaseShift() {
|
||||
setCtcssCdcssMode(0x10);
|
||||
}
|
||||
void HamShield::setInnerCdcssMode(){
|
||||
setCtcssCdcssMode(2);
|
||||
void HamShield::setDetInvertCdcss() {
|
||||
setCtcssCdcssMode(0x4);
|
||||
}
|
||||
void HamShield::setOuterCtcssMode(){
|
||||
setCtcssCdcssMode(5);
|
||||
void HamShield::setDetCdcss() {
|
||||
setCtcssCdcssMode(0x2);
|
||||
}
|
||||
void HamShield::setOuterCdcssMode(){
|
||||
setCtcssCdcssMode(6);
|
||||
void HamShield::setDetCtcss() {
|
||||
setCtcssCdcssMode(0x1);
|
||||
}
|
||||
|
||||
void HamShield::disableCtcssCdcss(){
|
||||
setCtcssCdcssMode(0);
|
||||
}
|
||||
|
||||
// Ctcss_sel
|
||||
// 1 = ctcss_cmp/cdcss_cmp out via gpio
|
||||
// 0 = ctcss/cdcss sdo out vio gpio
|
||||
void HamShield::setCtcssSel(bool cmp_nsdo){
|
||||
HSwriteBitW(devAddr, A1846S_SUBAUDIO_REG, A1846S_CTCSS_SEL_BIT, cmp_nsdo);
|
||||
// 0 = ctcss/cdcss sdo out via gpio
|
||||
void HamShield::setCtcssGpioSel(bool cmp_nsdo){
|
||||
setGpioFcn(0);
|
||||
}
|
||||
bool HamShield::getCtcssSel(){
|
||||
HSreadBitW(devAddr, A1846S_SUBAUDIO_REG, A1846S_CTCSS_SEL_BIT, radio_i2c_buf);
|
||||
return (radio_i2c_buf[0] != 0);
|
||||
bool HamShield::getCtcssGpioSel(){
|
||||
uint16_t mode = getGpioMode(0);
|
||||
return (mode == 1);
|
||||
}
|
||||
|
||||
// Cdcss_sel
|
||||
// 1 = long (24 bit) code
|
||||
// 0 = short(23 bit) code
|
||||
void HamShield::setCdcssSel(bool long_nshort){
|
||||
HSwriteBitW(devAddr, A1846S_SUBAUDIO_REG, A1846S_CDCSS_SEL_BIT, long_nshort);
|
||||
HSwriteBitW(devAddr, A1846S_CTCSS_MODE_REG, A1846S_CDCSS_SEL_BIT, long_nshort);
|
||||
}
|
||||
bool HamShield::getCdcssSel(){
|
||||
HSreadBitW(devAddr, A1846S_SUBAUDIO_REG, A1846S_CDCSS_SEL_BIT, radio_i2c_buf);
|
||||
return (radio_i2c_buf[0] != 0);
|
||||
HSreadBitW(devAddr, A1846S_CTCSS_MODE_REG, A1846S_CDCSS_SEL_BIT, radio_i2c_buf);
|
||||
return (radio_i2c_buf[0] == 1);
|
||||
}
|
||||
|
||||
void HamShield::setCdcssInvert(bool invert) {
|
||||
HSwriteBitW(devAddr, A1846S_CTCSS_MODE_REG, A1846S_CDCSS_INVERT_BIT, invert);
|
||||
}
|
||||
bool HamShield::getCdcssInvert() {
|
||||
HSreadBitW(devAddr, A1846S_CTCSS_MODE_REG, A1846S_CDCSS_INVERT_BIT, radio_i2c_buf);
|
||||
return (radio_i2c_buf[0] == 1);
|
||||
}
|
||||
|
||||
// Cdcss neg_det_en
|
||||
void HamShield::enableCdcssNegDet(){
|
||||
HSwriteBitW(devAddr, A1846S_SUBAUDIO_REG, A1846S_NEG_DET_EN_BIT, 1);
|
||||
}
|
||||
void HamShield::disableCdcssNegDet(){
|
||||
HSwriteBitW(devAddr, A1846S_SUBAUDIO_REG, A1846S_NEG_DET_EN_BIT, 0);
|
||||
}
|
||||
bool HamShield::getCdcssNegDetEnabled(){
|
||||
HSreadBitW(devAddr, A1846S_SUBAUDIO_REG, A1846S_NEG_DET_EN_BIT, radio_i2c_buf);
|
||||
return (radio_i2c_buf[0] != 0);
|
||||
uint16_t css_mode = getCtcssCdcssMode();
|
||||
return (css_mode == 4);
|
||||
}
|
||||
|
||||
// Cdcss pos_det_en
|
||||
void HamShield::enableCdcssPosDet(){
|
||||
HSwriteBitW(devAddr, A1846S_SUBAUDIO_REG, A1846S_POS_DET_EN_BIT, 1);
|
||||
}
|
||||
void HamShield::disableCdcssPosDet(){
|
||||
HSwriteBitW(devAddr, A1846S_SUBAUDIO_REG, A1846S_POS_DET_EN_BIT, 0);
|
||||
}
|
||||
bool HamShield::getCdcssPosDetEnabled(){
|
||||
HSreadBitW(devAddr, A1846S_SUBAUDIO_REG, A1846S_POS_DET_EN_BIT, radio_i2c_buf);
|
||||
return (radio_i2c_buf[0] != 0);
|
||||
uint16_t css_mode = getCtcssCdcssMode();
|
||||
return (css_mode == 2);
|
||||
}
|
||||
|
||||
// css_det_en
|
||||
void HamShield::enableCssDet(){
|
||||
HSwriteBitW(devAddr, A1846S_SUBAUDIO_REG, A1846S_CSS_DET_EN_BIT, 1);
|
||||
}
|
||||
void HamShield::disableCssDet(){
|
||||
HSwriteBitW(devAddr, A1846S_SUBAUDIO_REG, A1846S_CSS_DET_EN_BIT, 0);
|
||||
}
|
||||
bool HamShield::getCssDetEnabled(){
|
||||
HSreadBitW(devAddr, A1846S_SUBAUDIO_REG, A1846S_CSS_DET_EN_BIT, radio_i2c_buf);
|
||||
return (radio_i2c_buf[0] != 0);
|
||||
bool HamShield::getCtssDetEnabled(){
|
||||
uint16_t css_mode = getCtcssCdcssMode();
|
||||
return (css_mode == 1);
|
||||
}
|
||||
|
||||
// ctcss freq
|
||||
void HamShield::setCtcss(float freq) {
|
||||
int dfreq = freq / 10000;
|
||||
dfreq = dfreq * 65536;
|
||||
setCtcssFreq(dfreq);
|
||||
void HamShield::setCtcss(float freq_Hz) {
|
||||
setCtcssFreq((uint16_t) (freq_Hz*100));
|
||||
}
|
||||
|
||||
void HamShield::setCtcssFreq(uint16_t freq){
|
||||
HSwriteWord(devAddr, A1846S_CTCSS_FREQ_REG, freq);
|
||||
void HamShield::setCtcssFreq(uint16_t freq_milliHz){
|
||||
HSwriteWord(devAddr, A1846S_CTCSS_FREQ_REG, freq_milliHz);
|
||||
}
|
||||
uint16_t HamShield::getCtcssFreq(){
|
||||
uint16_t HamShield::getCtcssFreqMilliHz(){
|
||||
HSreadWord(devAddr, A1846S_CTCSS_FREQ_REG, radio_i2c_buf);
|
||||
|
||||
return radio_i2c_buf[0];
|
||||
}
|
||||
float HamShield::getCtcssFreqHz() {
|
||||
return ((float)(getCtcssFreqMilliHz()))/100;
|
||||
}
|
||||
|
||||
void HamShield::setCtcssFreqToStandard(){
|
||||
// freq must be 134.4Hz for standard cdcss mode
|
||||
setCtcssFreq(0x2268);
|
||||
setCtcssFreq(13440);
|
||||
}
|
||||
|
||||
void HamShield::enableCtcss() {
|
||||
// enable TX
|
||||
HSwriteBitsW(devAddr, A1846S_CTCSS_MODE_REG, 10, 2, 3);
|
||||
|
||||
// enable RX
|
||||
setCtcssGpioSel(1);
|
||||
HSwriteBitW(devAddr, A1846S_TX_VOICE_REG, A1846S_CTCSS_DET_BIT, 0);
|
||||
HSwriteBitW(devAddr, A1846S_EMPH_FILTER_REG, A1846S_CTCSS_FILTER_BYPASS, 0);
|
||||
setDetCtcss();
|
||||
}
|
||||
void HamShield::disableCtcss() {
|
||||
HSwriteBitsW(devAddr, A1846S_CTCSS_MODE_REG, 10, 2, 0);
|
||||
disableCtcssCdcss();
|
||||
}
|
||||
|
||||
// cdcss codes
|
||||
|
|
@ -966,15 +936,15 @@ bool HamShield::getTailNoiseElimEnabled(){
|
|||
|
||||
// tail noise shift select
|
||||
// Select ctcss phase shift when use tail eliminating function when TX
|
||||
// 00 = 120 degree shift
|
||||
// 01 = 180 degree shift
|
||||
// 10 = 240 degree shift
|
||||
// 11 = reserved
|
||||
// 00 = 0 degree shift
|
||||
// 01 = 120 degree shift
|
||||
// 10 = 180 degree shift
|
||||
// 11 = 240 degree shift
|
||||
void HamShield::setShiftSelect(uint16_t shift_sel){
|
||||
HSwriteBitsW(devAddr, A1846S_SUBAUDIO_REG, A1846S_SHIFT_SEL_BIT, A1846S_SHIFT_SEL_LENGTH, shift_sel);
|
||||
HSwriteBitsW(devAddr, A1846S_CTCSS_MODE_REG, A1846S_SHIFT_SEL_BIT, A1846S_SHIFT_SEL_LEN, shift_sel);
|
||||
}
|
||||
uint16_t HamShield::getShiftSelect(){
|
||||
HSreadBitsW(devAddr, A1846S_SUBAUDIO_REG, A1846S_SHIFT_SEL_BIT, A1846S_SHIFT_SEL_LENGTH, radio_i2c_buf);
|
||||
HSreadBitsW(devAddr, A1846S_CTCSS_MODE_REG, A1846S_SHIFT_SEL_BIT, A1846S_SHIFT_SEL_LEN, radio_i2c_buf);
|
||||
return radio_i2c_buf[0];
|
||||
}
|
||||
|
||||
|
|
@ -1087,6 +1057,37 @@ void HamShield::setDTMFCode(uint16_t code){
|
|||
|
||||
}
|
||||
|
||||
// Tone detection
|
||||
void HamShield::lookForTone(uint16_t t_hz) {
|
||||
float tone_hz = (float) t_hz;
|
||||
float Fs = 6400000/1024;
|
||||
float k = floor(tone_hz/Fs*127 + 0.5);
|
||||
uint16_t t = (uint16_t) (round(2.0*cos(2.0*PI*k/127)*1024));
|
||||
|
||||
float k2 = floor(2*tone_hz/Fs*127+0.5);
|
||||
uint16_t h = (uint16_t) (round(2.0*cos(2.0*PI*k2/127)*1024));
|
||||
// set tone
|
||||
HSwriteWord(devAddr, 0x68, t);
|
||||
|
||||
// set second harmonic
|
||||
HSwriteWord(devAddr, 0x70, h);
|
||||
// turn on tone detect
|
||||
HSwriteBitW(devAddr, A1846S_DTMF_ENABLE_REG, A1846S_TONE_DETECT, 1);
|
||||
HSwriteBitW(devAddr, A1846S_DTMF_ENABLE_REG, A1846S_DTMF_ENABLE_BIT, 1);
|
||||
|
||||
}
|
||||
|
||||
uint8_t HamShield::toneDetected() {
|
||||
HSreadBitsW(devAddr, A1846S_DTMF_CODE_REG, A1846S_DTMF_SAMPLE_BIT, 1, radio_i2c_buf);
|
||||
if (radio_i2c_buf[0] != 0) {
|
||||
HSreadBitsW(devAddr, A1846S_DTMF_CODE_REG, A1846S_DTMF_CODE_BIT, A1846S_DTMF_CODE_LEN, radio_i2c_buf);
|
||||
if (radio_i2c_buf[0] == 1) {
|
||||
return 1;
|
||||
}
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
|
||||
// TX FM deviation
|
||||
void HamShield::setFMVoiceCssDeviation(uint16_t deviation){
|
||||
HSwriteBitsW(devAddr, A1846S_FM_DEV_REG, A1846S_FM_DEV_VOICE_BIT, A1846S_FM_DEV_VOICE_LENGTH, deviation);
|
||||
|
|
@ -1592,6 +1593,21 @@ uint8_t HamShield::morseLookup(char letter) {
|
|||
return 0;
|
||||
}
|
||||
|
||||
uint8_t HamShield::morseReverseLookup(uint8_t itu) {
|
||||
uint8_t i;
|
||||
for(i = 0; i < MORSE_TABLE_LENGTH; i++) {
|
||||
#ifndef MORSE_TABLE_PROGMEM
|
||||
if(asciiMorse[i].itu == itu)
|
||||
return asciiMorse[i].ascii;
|
||||
#else
|
||||
uint16_t w = pgm_read_word_near(asciiMorseProgmem + i);
|
||||
if( (uint8_t)(w & 0xff) == itu )
|
||||
return (char)((w>>8) & 0xff);
|
||||
#endif // MORSE_TABLE_PROGMEM
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
|
||||
/*
|
||||
|
||||
SSTV VIS Digital Header
|
||||
|
|
|
|||
111
src/HamShield.h
111
src/HamShield.h
|
|
@ -30,6 +30,7 @@
|
|||
#define A1846S_CLK_MODE_REG 0x04 // clk_mode
|
||||
#define A1846S_PABIAS_REG 0x0A // control register for bias voltage
|
||||
//#define A1846S_BAND_SEL_REG 0x0F // band_sel register <1:0>
|
||||
#define A1846S_FLAG_REG 0x1C
|
||||
#define A1846S_GPIO_MODE_REG 0x1F // GPIO mode select register
|
||||
#define A1846S_FREQ_HI_REG 0x29 // freq<29:16>
|
||||
#define A1846S_FREQ_LO_REG 0x2A // freq<15:0>
|
||||
|
|
@ -41,13 +42,12 @@
|
|||
#define A1846S_TH_L_VOX_REG 0x42 // register holds vox low (shut) threshold bits
|
||||
#define A1846S_FM_DEV_REG 0x43 // register holds fm deviation settings
|
||||
#define A1846S_RX_VOLUME_REG 0x44 // register holds RX volume settings
|
||||
#define A1846S_SUBAUDIO_REG 0x45 // sub audio register
|
||||
#define A1846S_SQ_OPEN_THRESH_REG 0x48 // see sq
|
||||
#define A1846S_SQ_SHUT_THRESH_REG 0x49 // see sq
|
||||
#define A1846S_CTCSS_FREQ_REG 0x4A // ctcss_freq<15:0>
|
||||
#define A1846S_CDCSS_CODE_HI_REG 0x4B // cdcss_code<23:16>
|
||||
#define A1846S_CDCSS_CODE_LO_REG 0x4C // cdccs_code<15:0>
|
||||
#define A1846S_CTCSS_FREQ_PRG 0x4e // copies CTCSS value from A1846S_CTCSS_FREQ_REG into CTCSS encoder
|
||||
#define A1846S_CTCSS_MODE_REG 0x4e // copies CTCSS value from A1846S_CTCSS_FREQ_REG into CTCSS encoder
|
||||
#define A1846S_SQ_OUT_SEL_REG 0x54 // see sq
|
||||
#define A1846S_EMPH_FILTER_REG 0x58
|
||||
#define A1846S_FLAG_REG 0x5C // holds flags for different statuses
|
||||
|
|
@ -92,22 +92,22 @@
|
|||
//#define A1846S_BAND_SEL_LENGTH 2
|
||||
|
||||
// Bitfields for A1846_GPIO_MODE_REG
|
||||
#define RDA1864_GPIO7_MODE_BIT 15 // <1:0> 00=hi-z,01=vox,10=low,11=hi
|
||||
#define RDA1864_GPIO7_MODE_LENGTH 2
|
||||
#define RDA1864_GPIO6_MODE_BIT 13 // <1:0> 00=hi-z,01=sq or =sq&ctcss/cdcss when sq_out_sel=1,10=low,11=hi
|
||||
#define RDA1864_GPIO6_MODE_LENGTH 2
|
||||
#define RDA1864_GPIO5_MODE_BIT 11 // <1:0> 00=hi-z,01=txon_rf,10=low,11=hi
|
||||
#define RDA1864_GPIO5_MODE_LENGTH 2
|
||||
#define RDA1864_GPIO4_MODE_BIT 9 // <1:0> 00=hi-z,01=rxon_rf,10=low,11=hi
|
||||
#define RDA1864_GPIO4_MODE_LENGTH 2
|
||||
#define RDA1864_GPIO3_MODE_BIT 7 // <1:0> 00=hi-z,01=sdo,10=low,11=hi
|
||||
#define RDA1864_GPIO3_MODE_LENGTH 2
|
||||
#define RDA1864_GPIO2_MODE_BIT 5 // <1:0> 00=hi-z,01=int,10=low,11=hi
|
||||
#define RDA1864_GPIO2_MODE_LENGTH 2
|
||||
#define RDA1864_GPIO1_MODE_BIT 3 // <1:0> 00=hi-z,01=code_out/code_in,10=low,11=hi
|
||||
#define RDA1864_GPIO1_MODE_LENGTH 2
|
||||
#define RDA1864_GPIO0_MODE_BIT 1 // <1:0> 00=hi-z,01=css_out/css_in/css_cmp,10=low,11=hi
|
||||
#define RDA1864_GPIO0_MODE_LENGTH 2
|
||||
#define A1846S_GPIO7_MODE_BIT 15 // <1:0> 00=hi-z,01=vox,10=low,11=hi
|
||||
#define A1846S_GPIO7_MODE_LENGTH 2
|
||||
#define A1846S_GPIO6_MODE_BIT 13 // <1:0> 00=hi-z,01=sq or =sq&ctcss/cdcss when sq_out_sel=1,10=low,11=hi
|
||||
#define A1846S_GPIO6_MODE_LENGTH 2
|
||||
#define A1846S_GPIO5_MODE_BIT 11 // <1:0> 00=hi-z,01=txon_rf,10=low,11=hi
|
||||
#define A1846S_GPIO5_MODE_LENGTH 2
|
||||
#define A1846S_GPIO4_MODE_BIT 9 // <1:0> 00=hi-z,01=rxon_rf,10=low,11=hi
|
||||
#define A1846S_GPIO4_MODE_LENGTH 2
|
||||
#define A1846S_GPIO3_MODE_BIT 7 // <1:0> 00=hi-z,01=sdo,10=low,11=hi
|
||||
#define A1846S_GPIO3_MODE_LENGTH 2
|
||||
#define A1846S_GPIO2_MODE_BIT 5 // <1:0> 00=hi-z,01=int,10=low,11=hi
|
||||
#define A1846S_GPIO2_MODE_LENGTH 2
|
||||
#define A1846S_GPIO1_MODE_BIT 3 // <1:0> 00=hi-z,01=code_out/code_in,10=low,11=hi
|
||||
#define A1846S_GPIO1_MODE_LENGTH 2
|
||||
#define A1846S_GPIO0_MODE_BIT 1 // <1:0> 00=hi-z,01=css_out/css_in/css_cmp,10=low,11=hi
|
||||
#define A1846S_GPIO0_MODE_LENGTH 2
|
||||
|
||||
// Bitfields for A1846S_INT_MODE_REG
|
||||
#define A1846S_CSS_CMP_INT_BIT 9 // css_cmp_uint16_t enable
|
||||
|
|
@ -123,6 +123,7 @@
|
|||
// Bitfields for A1846S_TX_VOICE_REG
|
||||
#define A1846S_VOICE_SEL_BIT 14 //voice_sel<1:0>
|
||||
#define A1846S_VOICE_SEL_LENGTH 3
|
||||
#define A1846S_CTCSS_DET_BIT 5
|
||||
|
||||
// Bitfields for A1846S_TH_H_VOX_REG
|
||||
#define A1846S_TH_H_VOX_BIT 14 // th_h_vox<14:0>
|
||||
|
|
@ -140,16 +141,14 @@
|
|||
#define A1846S_RX_VOL_2_BIT 3 // volume 2 <3:0>, (0000)-15dB~(1111)0dB, step 1dB
|
||||
#define A1846S_RX_VOL_2_LENGTH 4
|
||||
|
||||
// Bitfields for A1846S_SUBAUDIO_REG Sub Audio Register
|
||||
#define A1846S_SHIFT_SEL_BIT 15 // shift_sel<1:0> see eliminating tail noise
|
||||
#define A1846S_SHIFT_SEL_LENGTH 2
|
||||
#define A1846S_POS_DET_EN_BIT 11 // if 1, cdcss code will be detected
|
||||
#define A1846S_CSS_DET_EN_BIT 10 // 1 - sq detect will add ctcss/cdcss detect result and control voice output on or off
|
||||
#define A1846S_NEG_DET_EN_BIT 7 // if 1, cdcss inverse code will be detected at same time
|
||||
#define A1846S_CDCSS_SEL_BIT 4 // cdcss_sel
|
||||
#define A1846S_CTCSS_SEL_BIT 3 // ctcss_sel
|
||||
#define A1846S_C_MODE_BIT 2 // c_mode<2:0>
|
||||
#define A1846S_C_MODE_LENGTH 3
|
||||
// Bitfields for Sub Audio Bits
|
||||
#define A1846S_CTDCSS_OUT_SEL_BIT 5
|
||||
#define A1846S_CTDCSS_DTEN_BIT 4
|
||||
#define A1846S_CTDCSS_DTEN_LEN 5
|
||||
#define A1846S_CDCSS_SEL_BIT 6 // cdcss_sel
|
||||
#define A1846S_CDCSS_INVERT_BIT 6 // cdcss_sel
|
||||
#define A1846S_SHIFT_SEL_BIT 15
|
||||
#define A1846S_SHIFT_SEL_LEN 2
|
||||
|
||||
// Bitfields for A1846S_SQ_THRESH_REG
|
||||
#define A1846S_SQ_OPEN_THRESH_BIT 9 // sq open threshold <9:0>
|
||||
|
|
@ -164,6 +163,7 @@
|
|||
|
||||
// Bitfields for A1846S_EMPH_FILTER_REG
|
||||
#define A1846S_EMPH_FILTER_EN 7
|
||||
#define A1846S_CTCSS_FILTER_BYPASS 3
|
||||
|
||||
// Bitfields for A1846S_FLAG_REG
|
||||
#define A1846S_RXON_RF_FLAG_BIT 10 // 1 when rxon is enabled
|
||||
|
|
@ -183,6 +183,7 @@
|
|||
|
||||
// Bitfields for A1846S_DTMF_ENABLE_REG
|
||||
#define A1846S_DTMF_ENABLE_BIT 15
|
||||
#define A1846S_TONE_DETECT 14
|
||||
#define A18462_DTMF_DET_TIME_BIT 7
|
||||
#define A18462_DTMF_DET_TIME_LEN 8
|
||||
|
||||
|
|
@ -283,15 +284,6 @@ class HamShield {
|
|||
|
||||
// Subaudio settings
|
||||
|
||||
// Recommended user function for setting and receiving CTCSS does
|
||||
// TODO: set others to private and/or deprecate
|
||||
|
||||
void setCtcssEncoder(float freq); // generate sub audio tone on channel when transmitting
|
||||
void setCtcssDecoder(float freq); // unmute audio on tone present when receiving channel
|
||||
|
||||
|
||||
|
||||
|
||||
// Ctcss/cdcss mode sel
|
||||
// x00=disable,
|
||||
// 001=inner ctcss en,
|
||||
|
|
@ -301,17 +293,29 @@ class HamShield {
|
|||
// others =disable
|
||||
void setCtcssCdcssMode(uint16_t mode);
|
||||
uint16_t getCtcssCdcssMode();
|
||||
void setInnerCtcssMode();
|
||||
void setInnerCdcssMode();
|
||||
void setOuterCtcssMode();
|
||||
void setOuterCdcssMode();
|
||||
void setDetPhaseShift();
|
||||
void setDetInvertCdcss();
|
||||
void setDetCdcss();
|
||||
void setDetCtcss();
|
||||
void disableCtcssCdcss();
|
||||
|
||||
// ctcss freq
|
||||
void setCtcss(float freq_Hz);
|
||||
void setCtcssFreq(uint16_t freq_milliHz);
|
||||
uint16_t getCtcssFreqMilliHz();
|
||||
float getCtcssFreqHz();
|
||||
void setCtcssFreqToStandard(); // freq must be 134.4Hz for standard cdcss mode
|
||||
void enableCtcss();
|
||||
void disableCtcss();
|
||||
|
||||
// Ctcss_sel
|
||||
// 1 = ctcss_cmp/cdcss_cmp out via gpio
|
||||
// 0 = ctcss/cdcss sdo out vio gpio
|
||||
void setCtcssSel(bool cmp_nsdo);
|
||||
bool getCtcssSel();
|
||||
void setCtcssGpioSel(bool cmp_nsdo);
|
||||
bool getCtcssGpioSel();
|
||||
|
||||
void setCdcssInvert(bool invert);
|
||||
bool getCdcssInvert();
|
||||
|
||||
// Cdcss_sel
|
||||
// 1 = long (24 bit) code
|
||||
|
|
@ -319,25 +323,13 @@ class HamShield {
|
|||
void setCdcssSel(bool long_nshort);
|
||||
bool getCdcssSel();
|
||||
// Cdcss neg_det_en
|
||||
void enableCdcssNegDet();
|
||||
void disableCdcssNegDet();
|
||||
bool getCdcssNegDetEnabled();
|
||||
|
||||
// Cdcss pos_det_en
|
||||
void enableCdcssPosDet();
|
||||
void disableCdcssPosDet();
|
||||
bool getCdcssPosDetEnabled();
|
||||
|
||||
// css_det_en
|
||||
void enableCssDet();
|
||||
void disableCssDet();
|
||||
bool getCssDetEnabled();
|
||||
|
||||
// ctcss freq
|
||||
void setCtcss(float freq);
|
||||
void setCtcssFreq(uint16_t freq);
|
||||
uint16_t getCtcssFreq();
|
||||
void setCtcssFreqToStandard(); // freq must be 134.4Hz for standard cdcss mode
|
||||
// ctss_det_en
|
||||
bool getCtssDetEnabled();
|
||||
|
||||
// cdcss codes
|
||||
void setCdcssCode(uint16_t code);
|
||||
|
|
@ -406,6 +398,10 @@ class HamShield {
|
|||
uint16_t getDTMFTxActive();
|
||||
void setDTMFCode(uint16_t code);
|
||||
|
||||
// Tone
|
||||
void lookForTone(uint16_t tone_hz);
|
||||
uint8_t toneDetected();
|
||||
|
||||
|
||||
// TX FM deviation
|
||||
void setFMVoiceCssDeviation(uint16_t deviation);
|
||||
|
|
@ -474,6 +470,7 @@ class HamShield {
|
|||
void setMorseDotMillis(unsigned int morse_dot_dur_millis);
|
||||
void morseOut(char buffer[HAMSHIELD_MORSE_BUFFER_SIZE]);
|
||||
uint8_t morseLookup(char letter);
|
||||
uint8_t morseReverseLookup(uint8_t itu);
|
||||
bool waitForChannel(long timeout, long breakwindow, int setRSSI);
|
||||
void SSTVVISCode(int code);
|
||||
void SSTVTestPattern(int code);
|
||||
|
|
|
|||
Loading…
Reference in New Issue