bladerunner/docs/intro.rst

67 lines
1.7 KiB
ReStructuredText
Raw Normal View History

Introduction
============
I'm working on building a cluster of Raspberry Pi CM4 compute blades. I plan on
using the cluster to learn a bunch of stuff, but I need to be able to provision
the blades automatically. This repo is my work in that area.
There are some assumptions made:
1. All the systems involved are Debian-ish systems, particularly Ubuntu. The
build system here will assume this. It may work on non-Ubuntu apt-based
systems. For non-Debian systems, I've also been working on including
container builds that may work.
There are three types of systems:
- ``dev`` indicates DEV compute blades.
- ``tpm`` indicates TPM compute blades.
- ``gw`` indicates the gateway system, which may perform other functions.
The `computeblade docs <https://docs.computeblade.com/>`_ has a description of
the different blade types.
Below is a diagram of the planned system.
.. graphviz ::
digraph cluster {
subgraph {
dev01;
dev02;
dev03;
dev04;
dev05;
tpm01;
tpm02;
tpm03;
tpm04;
tpm05;
}
"poe-switch" -> dev01 [dir=both];
"poe-switch" -> dev02 [dir=both];
"poe-switch" -> dev03 [dir=both];
"poe-switch" -> dev04 [dir=both];
"poe-switch" -> dev05 [dir=both];
"poe-switch" -> tpm01 [dir=both];
"poe-switch" -> tpm02 [dir=both];
"poe-switch" -> tpm03 [dir=both];
"poe-switch" -> tpm04 [dir=both];
"poe-switch" -> tpm05 [dir=both];
"poe-switch" -> gw [dir=both];
publicnet -> gw [dir=both];
}
The hardware isn't slated to arrive until September at the earliest.
Hardware
--------
Blades: