The row cache rebuilt a string for every line of the file after each edit
and had one production caller left (filetype detection in the ImGui
frontend, which needs only the first line). Removed with it: rows_,
nrows_, the dirty flag set on every edit, ensure_rows_cache and a mutex
guarding only that cache. Tests read lines with GetLineString, Nrows or,
where they compare every line, a test-only LinesForTests().
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_015rcVQiiWyTzoNrsvLSaAfB
- Redoing an insert and undoing a delete put the cursor at col + size
on the start row even when the text spans lines, i.e. past the end of
the line. Later edits and their undo records then went to the wrong
place (a join recorded at column 2 of 'a' re-split the text wrongly)
and delete-word-prev read past the line (heap-buffer-overflow under
ASan). The cursor now goes after the text's last newline, and undo and
redo clamp it to the buffer.
- A recovered buffer stays modified in every undo state
(mark_base_unsaved): one edit and its undo made it look clean, and
closing it then discarded the recovered text and its journal.
- Save-and-quit records the saved undo state.
- Visual-line selections are clamped to the buffer when read; the
visual newline counts the cursor's own line only if it was selected.
A stale selection put the cursor rows past the end, where typed text
could not be undone.
- The yank size cap accounts for visual-line yanks (once per line).
- After an exception escapes a command, open undo groups are closed so
later edits do not join them.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_015rcVQiiWyTzoNrsvLSaAfB
- Ownership is applied before permissions: chown clears setuid/setgid,
so saving a 06755 file left it 0755.
- The umask is read once during static initialisation. Reading it at
save time needed umask(0)/umask(old), briefly changing it for the swap
writer thread creating files.
- Before rewriting a hard-linked file in place, the new content is
written and synced to a copy beside it; if the in-place write fails
(ENOSPC, EIO) the copy is kept and named in the error.
- Journal headers also record a CRC-32 of the base file (flags bit 1,
bytes 40..43). A changed mtime with the same size and content
(touch, checkout back and forth) no longer marks a journal stale.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_015rcVQiiWyTzoNrsvLSaAfB
- Quit checks every buffer for unsaved changes and names them; it used
to look only at the current buffer and exit, dropping the rest (an
unnamed buffer's text was unrecoverable). Save-and-quit does not quit
while other buffers are dirty.
- Reload of a dirty buffer needs a second C-k l with no edit in between
(it discarded edits, undo history and the journal at once), and a file
deleted on disk is not 'reloaded' into an empty buffer.
- At the destructive y/n prompts ("Recover swap edits?" and "Save
changes to X?"), only an explicit 'n' discards; Enter or any other key
cancels. Keys typed while the startup recovery prompt appeared used to
delete the crash journal. SwapRecoveryPrompt_Discard now answers 'n'.
- Saving from the close prompt refuses to overwrite a file changed on
disk, like save.
- Save-as onto a file open in another buffer is refused.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_015rcVQiiWyTzoNrsvLSaAfB
- A session never unlinks a journal it does not own: Detach, ResetJournal
and NotifyFilenameChanged skip removal when this session was locked
out or another session holds the lock, and PruneSwapDir skips held
journals. A second session used to delete the first session's live
journal on save or close.
- The writer thread's periodic fsync now runs under mtx_. It fsynced fds
that the main thread could close concurrently (or that had been
reused); an in-flight fsync also kept a just-closed journal's flock
alive, so the owner's own cleanup saw its journal as held.
- Compaction locks the compacted file before renaming it into place and
keeps using it, so the journal is never unlocked in between; a failed
lock on the truncating reopen marks the session locked out.
- Unnamed-buffer journals include the pid, so sessions no longer share
(and delete) each other's unnamed-N.swp.
- RowsView keeps only the previous generation of cached rows: keeping
all of them made C-u 2000 M-d on a 1 MiB line use ~2 GB.
- Renderers run regex match highlighting through ForEachRegexMatch,
which uses the large-stack worker for lines over 512 bytes; some
patterns overflowed the main stack well under the previous 10,000
byte limit.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_015rcVQiiWyTzoNrsvLSaAfB
- open_ctx takes a non-blocking flock on the journal. A journal locked
by another kte process is left alone: this session reports it once
and does not write (records from two sessions used to interleave in
one file). Opening a file whose journal is live in another session
skips recovery instead of replaying or removing that journal.
- The header records the size and mtime of the file the journal's
records apply to (flags bit 0, bytes 24..39; previously reserved, so
no version change). Before offering recovery, a journal whose base no
longer matches the file on disk (changed after a crash, or the crash
fell between a save's rename and the journal reset) is treated as
stale and offered for deletion, instead of replaying its edits onto
different text. Journals from older kte (flag clear) replay as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_015rcVQiiWyTzoNrsvLSaAfB
- Recovery works when another named buffer is current. On that path
OpenFile's NotifyFilenameChanged deleted the journal (old path ==
new path) that was about to be replayed; the swap was lost and the
file opened without the edits (pre-existing).
- After recovering from a journal with a torn final record, the torn
bytes are truncated before the session appends to it (ReplayFile now
reports the valid prefix length). A journal that recovers nothing is
removed instead of appended to.
- Reload restarts the journal; recovery used to replay the edits the
reload discarded.
- Opening a file that is already open switches to its buffer (in
OpenFile and before the recovery check). Two buffers for one file
interleaved records in one journal, and closing either unlinked it.
- Swap file names escape '!' and '%', so distinct paths no longer
share a journal ('/x/a!b' vs '/x/a/b'). Swap files for paths that
contain those characters get new names.
- The gap flag is cleared when the journal restarts, and a gap that
cannot be closed (buffer too large to checkpoint) is reported once.
- crc32's table is initialised thread-safely; writer-thread error
reports identify the buffer by journal path instead of racing on
Buffer::Filename(); Close() no longer retries on EINTR (the fd is
already released and may have been reused).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_015rcVQiiWyTzoNrsvLSaAfB
- Replay recovers every complete record before a torn final record (the
normal result of a crash mid-append) and reports it through err,
instead of rejecting the whole journal. SwapReplay_TruncatedLog is
updated to the new behaviour.
- A record that cannot be written (open/write failure, breaker open)
marks the journal as having a gap. Later position-based records are
dropped until a checkpoint re-establishes the content; recorders
request one on the next edit (at most once per second).
- A failed append is truncated back off the file, and a failed header
write closes the file so the next attempt starts fresh.
- Inserts over the 24-bit record limit are split into consecutive
records; buffers too large to checkpoint are no longer snapshotted
and rejected on every checkpoint.
- Declining to delete an unreadable swap moves it to .corrupt so new
edits are not appended behind the bad data.
- NotifyFilenameChanged no longer writes a full checkpoint into the
journal it is about to delete.
Audit findings D7, P5.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_015rcVQiiWyTzoNrsvLSaAfB
- Added detailed journaling system (`SwapManager`) for crash recovery, including edit recording and replay.
- Integrated recovery prompts for handling swap files during file open flows.
- Implemented swap file cleanup, checkpointing, and compaction mechanisms.
- Added extensive unit tests for swap-related behaviors such as recovery prompts, file pruning, and corruption handling.
- Updated CMake to include new test files.
Claude
kyle