- Quit checks every buffer for unsaved changes and names them; it used
to look only at the current buffer and exit, dropping the rest (an
unnamed buffer's text was unrecoverable). Save-and-quit does not quit
while other buffers are dirty.
- Reload of a dirty buffer needs a second C-k l with no edit in between
(it discarded edits, undo history and the journal at once), and a file
deleted on disk is not 'reloaded' into an empty buffer.
- At the destructive y/n prompts ("Recover swap edits?" and "Save
changes to X?"), only an explicit 'n' discards; Enter or any other key
cancels. Keys typed while the startup recovery prompt appeared used to
delete the crash journal. SwapRecoveryPrompt_Discard now answers 'n'.
- Saving from the close prompt refuses to overwrite a file changed on
disk, like save.
- Save-as onto a file open in another buffer is refused.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_015rcVQiiWyTzoNrsvLSaAfB
- A session never unlinks a journal it does not own: Detach, ResetJournal
and NotifyFilenameChanged skip removal when this session was locked
out or another session holds the lock, and PruneSwapDir skips held
journals. A second session used to delete the first session's live
journal on save or close.
- The writer thread's periodic fsync now runs under mtx_. It fsynced fds
that the main thread could close concurrently (or that had been
reused); an in-flight fsync also kept a just-closed journal's flock
alive, so the owner's own cleanup saw its journal as held.
- Compaction locks the compacted file before renaming it into place and
keeps using it, so the journal is never unlocked in between; a failed
lock on the truncating reopen marks the session locked out.
- Unnamed-buffer journals include the pid, so sessions no longer share
(and delete) each other's unnamed-N.swp.
- RowsView keeps only the previous generation of cached rows: keeping
all of them made C-u 2000 M-d on a 1 MiB line use ~2 GB.
- Renderers run regex match highlighting through ForEachRegexMatch,
which uses the large-stack worker for lines over 512 bytes; some
patterns overflowed the main stack well under the previous 10,000
byte limit.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_015rcVQiiWyTzoNrsvLSaAfB
- OpenFromFile opens non-blocking, fstat()s and accepts regular files
only. A directory made tellg() report a huge size and bad_alloc exit
the editor (reachable by Tab-completing a directory in the open
prompt); a FIFO blocked open() forever with SIGINT ignored; a device
node opened as an empty, file-backed buffer that saving then replaced
with a regular file. Files are read to EOF in chunks; a file too large
to load is reported, not fatal.
- Saving refuses to replace an existing non-regular file.
- Exceptions escaping a command handler are reported in the status line
and error log instead of propagating to main() and exiting, which lost
every unsaved buffer (unnamed buffers' journals are never recovered).
- Commands use non-throwing filesystem queries for existence checks,
the current directory and Tab completion (ENAMETOOLONG, EACCES or a
deleted working directory used to throw).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_015rcVQiiWyTzoNrsvLSaAfB
- open_ctx takes a non-blocking flock on the journal. A journal locked
by another kte process is left alone: this session reports it once
and does not write (records from two sessions used to interleave in
one file). Opening a file whose journal is live in another session
skips recovery instead of replaying or removing that journal.
- The header records the size and mtime of the file the journal's
records apply to (flags bit 0, bytes 24..39; previously reserved, so
no version change). Before offering recovery, a journal whose base no
longer matches the file on disk (changed after a crash, or the crash
fell between a save's rename and the journal reset) is treated as
stale and offered for deletion, instead of replaying its edits onto
different text. Journals from older kte (flag clear) replay as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_015rcVQiiWyTzoNrsvLSaAfB
- C0 controls and DEL were passed to ncurses, which acted on them: a
carriage return moved to column 0 and the line padding then erased
the text, so every line of a CRLF file drew blank, and a backspace
ate the previous character. They are now drawn in caret notation
(^M, ^H, ^?) and counted as two cells. C1 controls (and stray bytes
0x80-0x9F, which decode to them; U+009B is CSI) are drawn as '?'.
- The width rule lives in TermWidth.h and is shared by the renderer's
drawing loop, its cursor placement and the command layer's
horizontal scrolling and mouse mapping, which also disagreed on NUL
and invalid bytes.
- GUI config: columns/rows must be 1..1000 and the font size a finite
4..200 (TOML 'size = inf' and huge values were accepted, leading to
UB in float-to-int conversion and int overflow downstream).
Verified in tmux: a CRLF file now shows 'first line^M' where the
baseline showed a blank line.
Audit findings B9 (and the CR/BS case from the follow-up review).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_015rcVQiiWyTzoNrsvLSaAfB
glibc marks fchown warn_unused_result; with optimisation and
_FORTIFY_SOURCE a (void) cast does not silence it, and -Werror failed
the Release build. Check the result explicitly instead.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_015rcVQiiWyTzoNrsvLSaAfB
- fsync is never retried. After a writeback error Linux may mark the
pages clean, so a retried fsync could succeed although the data was
lost, and the rename then replaced a good file with a bad one.
- New files get 0666 & ~umask instead of mkstemp's 0600. Replaced files
keep their mode (file-type bits masked) and, best effort, their owner
and group.
- Saving through a symlink writes the link's target instead of
replacing the link with a regular file (SaveAs did not resolve it).
- A file with several hard links is rewritten in place, so the other
names see the new content (as vim does by default).
- Save-as (prompt and ':save-as') asks before replacing any existing
file other than the buffer's own; it used to ask only for unnamed
buffers. Save-and-quit refuses to overwrite a file changed on disk,
like save. The first save of a new file records the saved undo state.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_015rcVQiiWyTzoNrsvLSaAfB
- Recovery works when another named buffer is current. On that path
OpenFile's NotifyFilenameChanged deleted the journal (old path ==
new path) that was about to be replayed; the swap was lost and the
file opened without the edits (pre-existing).
- After recovering from a journal with a torn final record, the torn
bytes are truncated before the session appends to it (ReplayFile now
reports the valid prefix length). A journal that recovers nothing is
removed instead of appended to.
- Reload restarts the journal; recovery used to replay the edits the
reload discarded.
- Opening a file that is already open switches to its buffer (in
OpenFile and before the recovery check). Two buffers for one file
interleaved records in one journal, and closing either unlinked it.
- Swap file names escape '!' and '%', so distinct paths no longer
share a journal ('/x/a!b' vs '/x/a/b'). Swap files for paths that
contain those characters get new names.
- The gap flag is cleared when the journal restarts, and a gap that
cannot be closed (buffer too large to checkpoint) is reported once.
- crc32's table is initialised thread-safely; writer-thread error
reports identify the buffer by journal path instead of racing on
Buffer::Filename(); Close() no longer retries on EINTR (the fd is
already released and may have been reused).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_015rcVQiiWyTzoNrsvLSaAfB
libstdc++'s std::regex matcher recurses about once per matched
character, so '.*', 'a+' or '(a|b)*' on a line of a few tens of
thousands of characters (minified JS/JSON) overflowed the 8 MiB stack
and crashed the editor from the regex search prompt or regex replace.
Regex search and regex replace now run their matching on a worker
thread with a 1 GiB reserved stack (RunWithLargeStack; the caller
waits, so nothing is shared concurrently). Renderers skip regex match
highlighting on lines over 10,000 bytes. Catastrophic backtracking
(e.g. (a*)*b) is still possible: std::regex has no time limit.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_015rcVQiiWyTzoNrsvLSaAfB
- Motion and delete commands read rows through RowsView (on-demand,
version-cached) instead of Buffer::Rows(), which rebuilt every line of
the file after each edit. On a 500k-line buffer after an edit:
backspace/delete/motions 80-90 ms -> ~0.1 ms; C-u 3000 C-d 273 s ->
0.25 s. Whole-buffer search scans keep Rows() (cached between edits).
- While a prompt is open only prompt-aware and view-only commands run.
Others edited the buffer behind the prompt (bypassing the read-only
check) or switched/closed buffers under a pending confirmation, which
then acted on the wrong buffer. The ':' command path now applies the
read-only check too.
- Pasting into a prompt (ImGui) flattens line breaks to spaces instead
of emitting Newline, which accepted the prompt and sent the rest of
the paste to the buffer (or ran replace-all).
- The mark region clamps both ends; a stale mark past the end of the
buffer is treated as end of buffer. This fixes kill-region deleting
the wrong text and leaving the cursor past end-of-line.
- Kill-line with a count stops at end of buffer instead of killing
lines above the cursor (regression from the D3 change).
- Undo groups nest, so SmartNewline in visual-line mode is one step.
- Word motions and word deletion treat non-ASCII bytes as word
characters and so never split a UTF-8 character.
- The universal-argument count saturates at 1,000,000 instead of
overflowing int.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_015rcVQiiWyTzoNrsvLSaAfB
Consolidation rewrites pieces without changing content or offsets but
invalidated the line index, so once a buffer passed the piece limit
every edit paid a full rescan again. A moved-from table kept the index
of the text it gave away, and Insert now updates that index in place,
producing ranges past the end of its buffer.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_015rcVQiiWyTzoNrsvLSaAfB
Every edit bumped the buffer version (through SetDirty) and called
InvalidateFrom(0), so all cached spans and line states were discarded
and stateful highlighters re-lexed from row 0 to the viewport on each
keystroke.
Buffer mutators now report the row they changed (edited_at_), which
bumps the version and tells the engine to drop only rows from there
down; a row's highlighting depends only on rows above it. A version
change that arrives without that notice still clears everything, so a
missed path cannot show stale spans. The engine keeps states as a
contiguous vector and caches spans for every row it lexes. SetDirty no
longer touches the version: the edits themselves do, including undo
and redo back to the saved state (D9 still holds; its test now checks
the highlighting itself).
Typing near the end of a 100k-line C++ file: 46.3 ms -> 0.14 ms of
highlighting work per keystroke.
Audit finding P3.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_015rcVQiiWyTzoNrsvLSaAfB
- PieceTable::Insert/Delete adjust a valid line index directly (shift
later line starts, add or drop starts for inserted or deleted
newlines) instead of invalidating it, which forced a byte-by-byte
rescan of the whole buffer on the next line query. On a 38 MB,
1M-line buffer, insert + line query drops from 14.7 ms to 0.28 ms.
- The terminal and ImGui renderers fetch only the rows they draw
(Nrows + GetLineString) instead of Buffer::Rows(), which rebuilt a
string for every line of the file on the first frame after each edit.
Qt's line-count uses switch to Nrows().
ImGuiRenderer.cc was syntax-checked with g++ and clang++ against the
vendored ImGui headers; the GUI targets could not be built here (no
SDL2 or Qt6).
Audit findings P1, P2.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_015rcVQiiWyTzoNrsvLSaAfB
- Backspace and delete-char remove a whole UTF-8 character (they
removed one byte, leaving an invalid lead byte in the file), and
record the full character for undo.
- Left/right step over whole characters; up/down snap the column to a
character boundary and clamp the row, which also removes an unsigned
underflow in move-down when the cursor was past the last row.
- Horizontal scroll offsets are computed in display cells, the way the
terminal renderer draws (tabs, wide characters), instead of bytes, so
long non-ASCII lines no longer scroll to blank with the cursor off
screen. The mouse column mapping uses the same measure.
Audit findings B5, B6.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_015rcVQiiWyTzoNrsvLSaAfB
ESC sets a flag that makes the next key a Meta command, but arrows,
mouse events, Enter, Tab and control chords returned before the flag
was checked and left it set. A later plain key then ran as a Meta
command: ESC, Right, d deleted a word instead of inserting 'd'. The
flag is now consumed up front, and the Meta lookup runs before the
control-chord and Enter handling so ESC ^H (meta-backspace) and ESC
Enter (SmartNewline) reach their bindings.
Verified by driving kte in a pty: ESC, Right, d on 'hello world' now
gives 'hdello world' (was 'hworld').
Audit finding B3.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_015rcVQiiWyTzoNrsvLSaAfB
- Regex replace-all, reflow and kill-region replaced or deleted whole
rows, which added or left a stray newline when the text ended on a
last line without one. They now edit the byte range in place.
- Regex replace-all no longer matches the empty position after a final
newline. Before, a zero-width pattern such as ^ matched it, added a
line, and matched the new empty last row again: the editor hung.
- Kill-line on the last row kills an unterminated line with the newline
before it, and does nothing on the empty row after a final newline
(it used to record an undo step that added a line).
- The visual-line newline records its splits as one undo step, and
places the cursor correctly for a repeat count.
- Buffer::delete_text computes its byte range directly instead of
materializing every line it spans.
Audit findings D3, D4, D5.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_015rcVQiiWyTzoNrsvLSaAfB
- Replay recovers every complete record before a torn final record (the
normal result of a crash mid-append) and reports it through err,
instead of rejecting the whole journal. SwapReplay_TruncatedLog is
updated to the new behaviour.
- A record that cannot be written (open/write failure, breaker open)
marks the journal as having a gap. Later position-based records are
dropped until a checkpoint re-establishes the content; recorders
request one on the next edit (at most once per second).
- A failed append is truncated back off the file, and a failed header
write closes the file so the next attempt starts fresh.
- Inserts over the 24-bit record limit are split into consecutive
records; buffers too large to checkpoint are no longer snapshotted
and rejected on every checkpoint.
- Declining to delete an unreadable swap moves it to .corrupt so new
edits are not appended behind the bad data.
- NotifyFilenameChanged no longer writes a full checkpoint into the
journal it is about to delete.
Audit findings D7, P5.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_015rcVQiiWyTzoNrsvLSaAfB
A secondary GUI window shared the primary's buffer vector but attached
buffers through its own SwapManager. Closing the window destroyed that
manager while buffers still held its recorders, so the next edit called
into freed memory; Rehome through the wrong manager also dropped
journaling for the primary's buffers.
Audit finding M3.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_015rcVQiiWyTzoNrsvLSaAfB
The worker read the Buffer (PieceTable pieces and add buffer) while the
main thread edited it with no shared lock, and kept a raw Buffer* that
dangled once the buffer vector reallocated or shifted. PrefetchViewport
now only highlights the visible rows synchronously.
Audit finding M2.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_015rcVQiiWyTzoNrsvLSaAfB
- SmartNewline recorded its indent insert after moving the cursor, so
undo deleted the wrong text; it is now recorded at the insertion
column and grouped with the newline. With a prompt open it now just
accepts the prompt (D1, B11).
- Scroll up/down, jump-to-mark and replace-all clamp the cursor to the
buffer, so edits are never made past end-of-line or end-of-buffer
(D2, M5).
- Replace-all is one undo step and no longer rebuilds Rows() per match
(D5, P4).
- Reflow on a blank line no longer merges adjacent paragraphs (D6).
- ensure_cursor_visible uses Nrows()/GetLineString instead of Rows() and
GetLineView, avoiding a whole-file rebuild per command (P1, P2).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_015rcVQiiWyTzoNrsvLSaAfB
set_escdelay is an ncurses function, not a macro, so the #ifdef guard
compiled it out and ESC waited the 1 s default. KEY_RESIZE was mapped
to Refresh, the C-g cancel handler, which cleared the mark and
cancelled open prompts (including swap recovery) on every resize.
Audit findings B1, B2.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_015rcVQiiWyTzoNrsvLSaAfB
SetDirty(false) did not bump the version, so undo back to the saved
state (and reload, and replace_all_bytes) left the highlighter serving
spans for the old text. Reloading a file deleted on disk now also
clears undo history recorded against the old content.
Audit finding D9.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_015rcVQiiWyTzoNrsvLSaAfB
Recursion depth equalled history length, so destroying or clearing a
buffer with a few hundred thousand undo steps overflowed the stack.
UndoSystem::clear() also freed only the first root branch, leaking the
root's siblings; it now frees the whole forest.
Audit finding M4.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_015rcVQiiWyTzoNrsvLSaAfB
Copy/move assignment kept the destination's line index, so closing a
buffer (vector erase move-assigns later buffers down) left the shifted
buffer with its predecessor's line offsets and out-of-bounds line views.
Appends that merged into an existing piece also skipped invalidation.
Audit findings M1, B12.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_015rcVQiiWyTzoNrsvLSaAfB
Two latent defects broke the kte target on macOS once TerminalInputHandler
switched from getch() to get_wch().
include_directories() referenced CURSES_INCLUDE_DIR, a name FindCurses never
sets (it exports CURSES_INCLUDE_DIRS). The variable expanded to nothing, so
no curses include path was added and the compiler silently fell back to the
macOS SDK's narrow-char header on the default include path.
Both the SDK and Homebrew headers declare get_wch and friends only when
NCURSES_WIDECHAR is set, defaulting it to 0 absent a feature-test macro, so
the build failed with "use of undeclared identifier 'get_wch'". We always
request and link the wide library, so define NCURSES_WIDECHAR=1; redefining
it identically is benign on platforms whose headers already set it.
kte and kge now compile and link against libncursesw, and the app bundle
vendors it. Full test suite passes.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
CMake 4.x FindCurses with CURSES_NEED_WIDE finds the macOS SDK's
libcurses.tbd but no matching wide-char header, so configure failed with
"Could NOT find Curses (missing: CURSES_INCLUDE_PATH)". Homebrew's
ncurses is keg-only, so it is not on the default search path either.
Existing build directories only worked by accident, via a hand-passed
-DCURSES_INCLUDE_PATH left in their CMakeCache; a clean configure failed,
which broke make-app-release.
Query `brew --prefix ncurses` on APPLE and prepend it to CMAKE_PREFIX_PATH
when present. A clean configure now succeeds with no manual flags and
links the real libncursesw.dylib instead of the SDK's narrow libcurses.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Releases the undo/crash-recovery/syntax-highlighting correctness work and
the GUI CRLF paste fix accumulated since v1.11.3.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The ImGui Cmd+V/Ctrl+V paste handler split clipboard text only on '\n',
leaving '\r' inside each segment. Pasting text with CRLF (Windows) or bare
CR (classic-Mac / some macOS apps) line endings enqueued an InsertText arg
containing '\r', which the InsertText command rejects with "InsertText arg
must not contain newlines".
Extract the paste-to-commands logic into a pure, SDL-free helper
(PasteSplit.h) that treats '\n', '\r\n', and bare '\r' each as one line
break, and add unit tests covering all line-ending forms plus blank-line
and trailing-newline preservation.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Undo/redo:
- cmd_newline recorded the undo node's position after the cursor moved past
the split point, so undoing Enter joined the wrong pair of lines.
- Backspace/Delete line-joins recorded UndoType::Newline, whose apply()
semantics are inverted for a join (forward=split); add UndoType::JoinLines
with correct forward/backward behavior.
- Regex replace-all, indent/unindent region, kill-to-eol, kill-line,
kill-region, and delete-word-prev/next mutated the buffer via the
no-undo-recording raw APIs; they now record undo, grouped atomically via a
shared UndoGroupGuard.
- Plain-text replace-all with an empty replacement advanced the scan
position one character too far, skipping adjacent/overlapping matches.
Crash recovery / memory safety:
- Buffer's move ctor/assignment never carried over swap_rec_,
on_disk_identity_, or the visual-line-mode fields, so the crash-recovery
journal silently stopped tracking a buffer whenever Editor's
std::vector<Buffer> reallocated or shifted (e.g. opening/closing files).
Added SwapManager::Rehome() plus Flush()-before-mutate in
Editor::AddBuffer/CloseBuffer so the journal's Buffer* key and the
background writer thread never reference a stale address.
- UndoTree leaked its entire node graph (including all edit text) on every
buffer close/reload; added ~UndoTree() to free it.
- main.cc didn't restore the terminal if an exception escaped the run loop;
added an RAII guard around Frontend::Shutdown().
Input handling:
- Terminal frontend used getch() instead of get_wch(), silently dropping
non-ASCII keyboard input despite linking wide-char ncurses.
- KKeymap's C-k lookup switches on an already-lowercased key, making
`case 'E'` unreachable dead code; C-k Shift-E silently aliased to C-k e.
- ImGui file picker wasn't modal: keystrokes typed while it was open still
reached the buffer underneath as edit commands, and Escape didn't close it.
- Gated ImGuiInputHandler's unconditional fprintf/fflush diagnostics behind
an IMGUI_IH_DEBUG macro, matching QtInputHandler's existing convention.
Syntax highlighting:
- Go/Rust/SQL highlighters weren't stateful, so multi-line /* */ comments
mis-highlighted as code starting on the second line.
- Python's triple-quoted-string handler didn't re-scan the remainder of a
line after a string closed mid-line, missing a same-line reopen.
- HighlighterEngine's state_last_contig_ field was declared but unused,
forcing an O(n) scan of state_cache_ on every stateful lookup; wired it up
as a real fast path and fixed InvalidateFrom() to keep it in sync.
- kge's :syntax off was silently undone the next frame because
apply_syntax_to_buffer() re-applied the config default unconditionally
every frame; added a user-override flag mirroring the existing
edit-mode-detection guard.
Added regression tests for all of the above (test_undo.cc, test_kkeymap.cc,
test_command_semantics.cc, test_search_replace_flow.cc, and a new
test_syntax_highlighting.cc). Full suite (163 tests) passes, including under
AddressSanitizer.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Large files made idle CPU spike because every frame re-measured every
line, recompiled the search regex per line, and ran full per-line
rendering work even for off-screen rows.
- Render only visible rows (with a small margin for smooth scrolling)
and advance the layout cursor to preserve total content height.
- Hoist the search std::regex compilation out of the per-line loop.
- Cache the max line width on the renderer; reset only when the buffer
or font changes, not on every edit.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
On macOS GUI builds, chdir(HOME) runs before deferred file opens are
processed, breaking relative paths passed on the command line. Resolve
each argv path to absolute immediately during argument parsing.
Bump version to 1.11.2.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
apply_syntax_to_buffer() was called every frame and unconditionally reset
edit mode from the file extension, making it impossible to toggle out of
writing mode for .txt/.md files. Add edit_mode_detected_ flag to Buffer so
auto-detection runs once per buffer. Writing mode now also disables syntax
highlighting as intended. Propagate edit_mode_ through Buffer copy/move ops.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
The GUI renderer had two competing horizontal scroll systems: a
character-based one (coloffs × space_w) and a pixel-based one. For
proportional fonts the character-based system used "M" width to
calculate viewport columns, triggering premature scrolling at ~50%
of the actual display width.
Switch the GUI renderer to purely pixel-based horizontal scrolling:
- Remove coloffs↔ImGui scroll_x bidirectional sync
- Measure rx_to_px from column 0 (absolute) instead of from coloffs
- Draw full expanded lines; let ImGui clip via its scroll viewport
- Report content width via SetCursorPosX+Dummy for the scrollbar
- Use average character width for cols estimate (not "M" width)
The terminal renderer continues using coloffs correctly—no changes
needed there.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
KTE_STATIC_LINK defaulted to ON, which fails on systems where ncurses
is only available as a shared library. The Nix build already passed
-DKTE_STATIC_LINK=OFF explicitly; this makes the default match.
Also add add_link_options("-stdlib=libc++") for Clang builds — without
it, compilation uses libc++ but the linker defaults to libstdc++,
causing undefined symbol errors.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Defer edit-mode font switch to next frame via RequestLoadFont() to
avoid modifying the locked ImFontAtlas between NewFrame() and Render().
Rework Nix packaging: split nativeBuildInputs/buildInputs correctly,
add devShells for nix develop, desktop file for kge, per-variant pname
and meta.mainProgram, and an overlay for NixOS configs.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
The edit-mode font switcher called LoadFont() directly between
NewFrame() and Render(), invalidating the font atlas ImGui was
actively using. Use RequestLoadFont() to defer the change to
the safe inter-frame point, matching the existing zoom pattern.
Also default code_font/writing_font to the main font when not
explicitly configured, preventing a mismatch that triggered the
switch on every first frame.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- Add three proportional serif fonts: Crimson Pro, ET Book, Spectral
- Fix text rendering for variable-width fonts: selection, cursor,
mouse click mapping, search highlights, and syntax-colored text
now use pixel-accurate measurement via ImGui::CalcTextSize()
- Add per-buffer edit mode (code/writing) with auto-detection from
file extension (.txt, .md, .rst, .org, .tex default to writing)
- Add C-k m keybinding and :mode command to toggle edit modes
- Switch config format from INI to TOML (kge.toml), with legacy
INI fallback; vendor toml++ v3.4.0
- New config keys: font.code and font.writing for per-mode defaults
- Add font tab completion for ImGui builds
- Add tab completion for :mode command
- Update help text, themes.md, and add CONFIG.md
- Bump version to 1.10.0
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Themes:
- Add leuchtturm theme (fountain pen ink on cream paper, brass/leather dark)
- Add per-theme syntax palettes for leuchtturm, tufte, and everforest
- Fix static inline globals giving each TU its own copy of gCurrentTheme
and gBackgroundMode (changed to inline for proper C++17 linkage)
- :background with no args now shows current mode
Font zoom:
- CMD-=/CMD--/CMD-0 to increase/decrease/reset font size
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Multi-window:
- Per-window ImGui contexts (fixes input, scroll, and rendering isolation)
- Per-instance scroll and mouse state in ImGuiRenderer (no more statics)
- Proper GL context activation during window destruction
- ValidateBufferIndex guards against stale curbuf_ across shared buffers
- Editor methods (CurrentBuffer, SwitchTo, CloseBuffer, etc.) use Buffers()
accessor to respect shared buffer lists
- New windows open with an untitled buffer
- Scratch buffer reuse works in secondary windows
- CMD-w on macOS closes only the focused window
- Deferred new-window creation to avoid mid-frame ImGui context corruption
Swap file cleanup:
- SaveAs prompt handler now calls ResetJournal
- cmd_save_and_quit now calls ResetJournal
- Editor::Reset detaches all buffers before clearing
- Tests for save-and-quit and editor-reset swap cleanup
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Warm cream paper, near-black ink, zero rounding, minimal chrome,
restrained dark red and navy accents following Tufte's design principles.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Claude
kyle