fpga: 7-segment test on TinyFPGA.

This commit is contained in:
Kyle Isom 2019-01-02 14:58:17 -08:00
parent 87f936d7b5
commit b70f066f25
5 changed files with 141 additions and 18 deletions

View File

@ -0,0 +1,41 @@
/// SegmentLCD represents a 7-segment display that takes as input a 4-bit
/// number and outputs the correct pin configuration. The pins need to be
/// wired as {G, F, E, D, C, B, A} for this to work.
///
/// For example,
///
/// wire [7:0] sum = 8'b00000000;
/// segment7 low (
/// .number(sum[3:0]),
/// .out({PIN_15, PIN_14, PIN_13, PIN_12, PIN_11, PIN_10, PIN_9})
/// );
module SegmentLCD (
input [3:0] number,
output reg [6:0] out
);
always @(*)
begin
case (number)
4'b0000: out = ~7'b0111111; // 0
4'b0001: out = ~7'b0000110; // 1
4'b0010: out = ~7'b1011011; // 2
4'b0011: out = ~7'b1001111; // 3
4'b0100: out = ~7'b1100110; // 4
4'b0101: out = ~7'b1101101; // 5
4'b0110: out = ~7'b1111101; // 6
4'b0111: out = ~7'b0000111; // 7
4'b1000: out = ~7'b1111111; // 8
4'b1001: out = ~7'b1100111; // 9
4'b1010: out = ~7'b1110111; // A
4'b1011: out = ~7'b1111100; // B
4'b1100: out = ~7'b0111001; // C
4'b1101: out = ~7'b1011110; // D
4'b1110: out = ~7'b1111001; // E
4'b1111: out = ~7'b1110001; // F
endcase
end
endmodule

View File

@ -0,0 +1,3 @@
[env]
board = TinyFPGA-BX

View File

@ -0,0 +1,49 @@
###############################################################################
#
# TinyFPGA BX constraint file (.pcf)
#
###############################################################################
#
# Copyright (c) 2018, Luke Valenty
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are met:
#
# 1. Redistributions of source code must retain the above copyright notice, this
# list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright notice,
# this list of conditions and the following disclaimer in the documentation
# and/or other materials provided with the distribution.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
# DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
# ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
# The views and conclusions contained in the software and documentation are those
# of the authors and should not be interpreted as representing official policies,
# either expressed or implied, of the <project name> project.
#
###############################################################################
####
# TinyFPGA BX information: https://github.com/tinyfpga/TinyFPGA-BX/
####
# Left side of board
set_io --warn-no-port PIN_9 E1
set_io --warn-no-port PIN_10 G2
set_io --warn-no-port PIN_11 H1
set_io --warn-no-port PIN_12 J1
set_io --warn-no-port PIN_13 H2
set_io --warn-no-port PIN_14 H9
set_io --warn-no-port PIN_15 D9
set_io --warn-no-port USBPU A3
set_io --warn-no-port CLK B2 # input

View File

@ -0,0 +1,30 @@
module SegmentLCDTest (
input CLK,
output PIN_9,
output PIN_10,
output PIN_11,
output PIN_12,
output PIN_13,
output PIN_14,
output PIN_15,
output USBPU
);
assign USBPU = 0;
reg [21:0] clock_counter = 21'b0000000000000000000000;
reg [3:0] number = 4'b0000;
SegmentLCD display (
.number(number),
.out({PIN_15, PIN_14, PIN_13, PIN_12, PIN_11, PIN_10, PIN_9})
);
always @(posedge CLK) begin
clock_counter <= clock_counter + 1;
if (clock_counter == 22'b1100001101010000000000) begin
number <= number + 1;
clock_counter <= 0;
end
end
endmodule

View File

@ -11,28 +11,28 @@
/// );
module SegmentLCD (
input [3:0] number,
output [6:0] out = 7'b0000000
output reg [6:0] out
);
always @(*)
begin
case (number)
4'b0000: out <= 7'b0111111; // 0
4'b0001: out <= 7'b0000110; // 1
4'b0010: out <= 7'b1011011; // 2
4'b0011: out <= 7'b1001111; // 3
4'b0100: out <= 7'b1100110; // 4
4'b0101: out <= 7'b1101101; // 5
4'b0110: out <= 7'b1111101; // 6
4'b0111: out <= 7'b0000111; // 7
4'b1000: out <= 7'b1111111; // 8
4'b1001: out <= 7'b1100111; // 9
4'b1010: out <= 7'b1110111; // A
4'b1011: out <= 7'b1111100; // B
4'b1100: out <= 7'b0111001; // C
4'b1101: out <= 7'b1011110; // D
4'b1110: out <= 7'b1111001; // E
4'b1111: out <= 7'b1110001; // F
4'b0000: out = ~7'b0111111; // 0
4'b0001: out = ~7'b0000110; // 1
4'b0010: out = ~7'b1011011; // 2
4'b0011: out = ~7'b1001111; // 3
4'b0100: out = ~7'b1100110; // 4
4'b0101: out = ~7'b1101101; // 5
4'b0110: out = ~7'b1111101; // 6
4'b0111: out = ~7'b0000111; // 7
4'b1000: out = ~7'b1111111; // 8
4'b1001: out = ~7'b1100111; // 9
4'b1010: out = ~7'b1110111; // A
4'b1011: out = ~7'b1111100; // B
4'b1100: out = ~7'b0111001; // C
4'b1101: out = ~7'b1011110; // D
4'b1110: out = ~7'b1111001; // E
4'b1111: out = ~7'b1110001; // F
endcase
end