Slight rearranging, and added comments to FM Beacon example sketch.

examples/FMBeacon/FMBeacon.ino

@@ -1,44 +1,68 @@
 /* 
-
 Morse Code Beacon
 
 Test beacon will transmit and wait 30 seconds. 
 Beacon will check to see if the channel is clear before it will transmit.
-
-
 */
 
+// Include the HamSheild and Wire (I2C) libraries
 #include <HamShield.h>
 #include <Wire.h>
 
+// Create a new instance of our HamSheild class, called 'radio'
 HamShield radio;
 
+// Run our start up things here
 void setup() { 
+  // Set up the serial port at 9600 Baud
   Serial.begin(9600);
-  Serial.println("starting up..");
+  
+  // Send a quick serial string
+  Serial.println("HamShield FM Beacon Example Sketch");
+  
+  // Start the Wire (I2C) library
   Wire.begin();
 
+  // Query the HamShield for status information
   Serial.print("Radio status: ");
   int result = radio.testConnection();
   Serial.println(result,DEC);
-  radio.initialize();                         // setup radio
-  radio.frequency(446000);                 // set to 70 cm call frequency
-  Serial.println("Done with radio beacon setup.");
+  
+  // Tell the HamShield to start up
+  radio.initialize();
+  
+  // Configure the HamShield to transmit and recieve on 446.000MHz
+  radio.frequency(446000);
+  
+  Serial.println("Radio Configured.");
 }
 
 void loop() {
-  if(radio.waitForChannel(30000,2000,-50)) {     // wait up to 30 seconds for a clear channel, and then 2 seconds of empty channel
-    Serial.println("Signal is clear -- Transmitting");
-    radio.setModeTransmit();                // turn on the transmitter
-    radio.morseOut("1ZZ9ZZ/B CN87 ARDUINO HAMSHIELD");
-    radio.setModeReceive();                 // turn off the transmitter (receive mode)
-    Serial.print("TX Off");
+  // We'll wait up to 30 seconds for a clear channel, requiring that the channel is clear for 2 seconds before we transmit
+  if (radio.waitForChannel(30000,2000,-50)) {
+    // If we get here, the channel is clear. Let's print the RSSI to the serial port as well.
+    Serial.print("Signal is clear, RSSI: ");
+    Serial.println(radio.readRSSI());
+    
+    // Start transmitting by putting the radio into transmit mode.
+    Serial.print("Transmitting... ");
+    radio.setModeTransmit();
+    
+    // Send a message out in morse code
+    radio.morseOut("CALLSIGN LOCATOR ARDUINO HAMSHIELD");
+    
+    // We're done sending the message, set the radio back into recieve mode.
+    radio.setModeReceive();
+    Serial.println("Done.");
+    
+    // Wait 30 seconds before we send our beacon again.
     delay(30000);    
   } else {
+    // If we get here, the channel is busy. Let's also print out the RSSI.
     Serial.print("The channel was busy. Waiting 10 seconds. RSSI: ");
     Serial.println(radio.readRSSI());
+    
+    // Wait 10 seconds and check the channel again.
     delay(10000);
   } 
 }
-
-