third-party
/
HamShield
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Removed JustTransmit example. It doesn't add anything not covered in other basic examples like FMBeacon or HandyTalkie

This commit is contained in:
Nigel Vander Houwen 2018-02-13 16:54:37 -08:00
parent e73f67429d
commit d4027f1e7b
1 changed files with 0 additions and 51 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

51
examples/JustTransmit/JustTransmit.ino
View File

@ -1,51 +0,0 @@
/* Hamshield
* Example: Just Transmit
* This example continuously transmits.
* Connect the HamShield to your Arduino. Screw the antenna
* into the HamShield RF jack. Plug a pair of headphones with
* built-in mic into the HamShield. Connect the Arduino to
* wall power and then to your computer via USB. After
* uploading this program to your Arduino, open the Serial
* Monitor to monitor the program's progress. After setup is
* complete, tune a HandyTalkie (HT) to 144.025MHz. Listen on
* the HT for the HamShield broadcasting from the mic.
*/
#include <HamShield.h>
#define PWM_PIN 3
#define RESET_PIN A3
#define SWITCH_PIN 2
HamShield radio;
void setup() {
// NOTE: if not using PWM out, it should be held low to avoid tx noise
pinMode(PWM_PIN, OUTPUT);
digitalWrite(PWM_PIN, LOW);
// prep the switch
pinMode(SWITCH_PIN, INPUT_PULLUP);
// set up the reset control pin
pinMode(RESET_PIN, OUTPUT);
digitalWrite(RESET_PIN, HIGH);
Serial.begin(9600);
Serial.println("If the sketch freezes at radio status, there is something wrong with power or the shield");
Serial.print("Radio status: ");
int result = radio.testConnection();
Serial.println(result,DEC);
Serial.println("Setting radio to its defaults..");
radio.initialize();
radio.setRfPower(0);
}
void loop() {
radio.bypassPreDeEmph();
radio.frequency(144025);
// radio.setTxSourceNone();
radio.setModeTransmit();
for(;;) { }
}