working afsk packets

Fixed Frequency Display at startup in AX25Receive.ino

README.md

@@ -1,15 +1,21 @@
 # HamShield
 
-WARNING: The dev branch is not guaranteed to work. Please use caution if you choose to use that branch. 
-
-All of the AFSK, DDS, etc. files have been moved to the in Progress directory. These files collectively use twice as much memory as the essential HamShield functions. The current plan is to make sure these are only included if they're going to be used. We'll also be adapting them to make them more friendly to non-Uno Arduinos. Stay tuned for those changes.
-
 The master branch is intended for use with HamShield hardware -09 and above.
 
-HamShield Arduino Library and Example Sketches
+WARNING: The dev branch is not guaranteed to work. Please use caution if you choose to use that branch. 
+
+# HamShield Arduino Library and Example Sketches
 
 This repository is meant to be checked out into your Arduino application's libraries folder. After reloading the application, the library and example sketches should be available for use.
 
 For overview, help, tricks, tips, and more, check out the wiki: 
 
 https://github.com/EnhancedRadioDevices/HamShield/wiki
+
+# KISS and AFSK
+
+We've moved the KISS and AFSK code to a separate library to help keep memory usage in simple sketches down. To use the AFSK examples, please also install these libraries:
+
+- https://github.com/EnhancedRadioDevices/DDS
+- https://github.com/EnhancedRadioDevices/HamShield_KISS
+

examples/AFSK_PacketTester/AFSK_PacketTester.ino

@@ -5,7 +5,7 @@
  * Connect the HamShield to your Arduino. Screw the antenna 
  * into the HamShield RF jack. Connect the Arduino to wall 
  * power and then to your computer via USB. After uploading 
- * this program to your adruino, open the Serial Monitor to 
+ * this program to your Arduino, open the Serial Monitor to 
  * monitor the process of the HamShield. Check for output on 
  * AFSK receiver.
 

examples/AFSK_SerialMessenger/AFSK_SerialMessenger.ino

@@ -4,7 +4,7 @@
  * seperate AFSK receiver to test the output of this example.
  * Connect the HamShield to your Arduino. Screw the antenna 
  * into the HamShield RF jack. After uploading this program 
- * to your adruino, open the Serial Monitor to monitor. Type 
+ * to your Arduino, open the Serial Monitor to monitor. Type 
  * a message under 254 characters into the bar at the top of 
  * the monitor. Click the "Send" button. Check for output on 
  * AFSK receiver.
@@ -13,7 +13,6 @@
 */
 
 
-#define DDS_REFCLK_DEFAULT 9600
 
 #include <HamShield.h>
 #include <DDS.h>
@@ -51,36 +50,57 @@ void setup() {
   radio.initialize();
   radio.frequency(145570);
   radio.setRfPower(0);
+  radio.setVolume1(0xFF);
+  radio.setVolume2(0xFF);
+  radio.setSQHiThresh(-100);
+  radio.setSQLoThresh(-100);
+  radio.setSQOn();
   dds.start();
   afsk.start(&dds);
   delay(100);
+  radio.setModeReceive();
   Serial.println("HELLO");
 }
 
-String temp[1] = "";
-
-
 void loop() {
     if(Serial.available()) { 
       char temp = (char)Serial.read();
       if(temp == '`') { 
-       prepMessage(); msgptr = 0; Serial.print("!!"); } 
+       //Serial.println(messagebuff);
+       prepMessage(); 
+       msgptr = 0; 
+       Serial.print("!!");
+      } 
       else { 
         messagebuff += temp;
         msgptr++;
       }
     }
     if(msgptr > 254) { messagebuff = ""; Serial.print("X!"); }
+    
+   if(afsk.decoder.read() || afsk.rxPacketCount()) {
+      // A true return means something was put onto the packet FIFO
+      // If we actually have data packets in the buffer, process them all now
+      while(afsk.rxPacketCount()) {
+        AFSK::Packet *packet = afsk.getRXPacket();
+        Serial.print(F("Packet: "));
+        if(packet) {
+          packet->printPacket(&Serial);
+          AFSK::PacketBuffer::freePacket(packet);
+        }
+      }
+    }
 }
     
 
 void prepMessage() { 
    radio.setModeTransmit();
-   delay(500);
+  delay(1000);
   origin_call = messagebuff.substring(0,messagebuff.indexOf(','));                                          // get originating callsign
-   destination_call = messagebuff.substring(messagebuff.indexOf(',')+1,
-              messagebuff.indexOf(',',messagebuff.indexOf(',')+1)); // get the destination call
-   textmessage = messagebuff.substring(messagebuff.indexOf(":"));
+  destination_call = messagebuff.substring(messagebuff.indexOf(',')+1,messagebuff.indexOf(',',messagebuff.indexOf(',')+1)); // get the destination call
+  textmessage = messagebuff.substring(messagebuff.indexOf(":")+1);
+  
+ // Serial.print("From: "); Serial.print(origin_call); Serial.print(" To: "); Serial.println(destination_call); Serial.println("Text: "); Serial.println(textmessage);
 
   AFSK::Packet *packet = AFSK::PacketBuffer::makePacket(22 + 32);
 
@@ -92,13 +112,11 @@ void prepMessage() {
   packet->print(textmessage);
   packet->finish();
 
-    textmessage = "";
-    
   bool ret = afsk.putTXPacket(packet);
 
   if(afsk.txReady()) {
     Serial.println(F("txReady"));
-      //radio.setModeTransmit();
+    radio.setModeTransmit();
     //delay(100);
     if(afsk.txStart()) {
       Serial.println(F("txStart"));
@@ -116,19 +134,15 @@ void prepMessage() {
     delay(50);
   }
   Serial.println("Done sending");
-    delay(3000);
   radio.setModeReceive();
 } 
  
 
-// TODO: d2 is now our switch, so don't write to that
 ISR(TIMER2_OVF_vect) {
   TIFR2 = _BV(TOV2);
   static uint8_t tcnt = 0;
   if(++tcnt == 8) {
-  //digitalWrite(2, HIGH);
     dds.clockTick();
-  //digitalWrite(2, LOW);
     tcnt = 0;
   }
 }
@@ -136,15 +150,9 @@ ISR(TIMER2_OVF_vect) {
 ISR(ADC_vect) {
   static uint8_t tcnt = 0;
   TIFR1 = _BV(ICF1); // Clear the timer flag
-  //PORTD |= _BV(2); // Diagnostic pin (D2)
   dds.clockTick();
   if(++tcnt == 1) {
-    if(afsk.encoder.isSending()) {
     afsk.timer();
-    }
     tcnt = 0;
   }
-  //PORTD &= ~(_BV(2)); // Pin D2 off again
 }
-
-

examples/AX25Receive/AX25Receive.ino

@@ -6,7 +6,7 @@
  * into the HamShield RF jack. Plug a pair of headphones into 
  * the HamShield. Connect the Arduino to wall power and then to 
  * your computer via USB. After uploading this program to your 
- * adruino, open the Serial Monitor so you will see the AFSK 
+ * Arduino, open the Serial Monitor so you will see the AFSK 
  * packet. Send AFSK packet from AFSK equipment at 145.01MHz.
 
  *  Note: add message receive code
@@ -47,6 +47,7 @@ void setup() {
   radio.frequency(145010);
   radio.setSQOff();
   Serial.println(F("Frequency"));
+  Serial.println(radio.getFrequency());
   delay(100);
   Serial.print(F("Squelch(H/L): "));
   Serial.print(radio.getSQHiThresh());

examples/CrystalCalibration/CrystalCalibration.ino

@@ -5,7 +5,7 @@
  * Connect the HamShield to your Arduino. Screw the antenna 
  * into the HamShield RF jack. Connect the Arduino to wall 
  * power and then to your computer via USB. After uploading 
- * this program to your adruino, open the Serial Monitor. 
+ * this program to your Arduino, open the Serial Monitor. 
  * Type 'h' into the bar at the top of the Serial Monitor 
  * and click the  "Send" button for more instructions.
 */

examples/DDS/DDS.ino

@@ -1,6 +1,6 @@
 /* Hamshield
  * Example: DDS
- * This is a simple example to show hot to transmit arbitrary 
+ * This is a simple example to show how to transmit arbitrary 
  * tones. In this case, the sketh alternates between 1200Hz 
  * and 2200Hz at 1s intervals.
  * Connect the HamShield to your Arduino. Screw the antenna 

examples/FMBeacon/FMBeacon.ino

@@ -6,7 +6,7 @@
  * Connect the HamShield to your Arduino. Screw the antenna 
  * into the HamShield RF jack. Connect the Arduino to wall 
  * power and then to your computer via USB. After uploading 
- * this program to your adruino, open the Serial Monitor to 
+ * this program to your Arduino, open the Serial Monitor to 
  * monitor the status of the beacon. To test, set a HandyTalkie 
  * to 438MHz. You should hear the message " KC7IBT ARDUINO 
  * HAMSHIELD" in morse code.

examples/FixMe/DTMFDecoder/DTMFDecoder.ino

@@ -1,283 +0,0 @@
-
-// BlueHAM Proto01 Connection Guide
-/**********************
-**
-**  BlueHAM Proto01 <--> Arduino
-**  ADC_SCL              A5
-**  ADC_DIO              A4
-**  GND                  GND
-**  PWM_RF_CTL           D9
-**
-**  Setting Connections
-**  MODE  -> GND
-**  SENB  -> GND
-**  PDN   -> 3.3V
-**  AVDD  -> 5V (note this should be a beefy supply, could draw up to 4As)
-**
-**
-**
-**  Pinout information for RadioPeripheral01 Prototype board
-**  GPIO0 - 
-**  GPIO1 - 
-**  GPIO2 - VHF_SEL
-**  GPIO3 - UHF_SEL
-**  GPIO4 - RX_EN
-**  GPIO5 - TX_EN
-**  GPIO6 - 
-**  GPIO7 - 
-**************************/
-
-// Arduino Wire library is required if I2Cdev I2CDEV_ARDUINO_WIRE implementation
-// is used in I2Cdev.h
-#include "Wire.h"
-#include "HAMShield.h"
-
-#include <Goertzel.h>
-
-//typedef enum {
-#define  MAIN_S 0
-#define  RX_S 1
-#define  TX_S 2
-#define  FREQ_S 3
-#define  UHF_S 4
-#define  VHF_S 5
-#define  PWR_S 6
-#define  GPIO_S 7
-//} menu_view;
-
-int state;
-
-/* goertzel routines */
-
-int sensorPin = A0;
-int led = 13;
-const float TARGET_FREQUENCY = 2200;
-const int N = 100; 
-const float THRESHOLD = 4000;	
-const float SAMPLING_FREQUENCY = 8900; 
-Goertzel goertzel = Goertzel(TARGET_FREQUENCY, N, SAMPLING_FREQUENCY);
-
-// create object for RDA
-HAMShield radio;
-
-
-#define LED_PIN 13
-bool blinkState = false;
-
-void setup() {
-  // initialize serial communication
-  Serial.begin(115200);
-  Serial.println("beginning radio setup");
-  
-  // join I2C bus (I2Cdev library doesn't do this automatically)
-   Wire.begin();
-
-  // verify connection
-  Serial.println("Testing device connections...");
-  Serial.println(radio.testConnection() ? "RDA radio connection successful" : "RDA radio connection failed");
-
-  // initialize device
-  Serial.println("Initializing I2C devices...");
-  radio.initialize(); // initializes automatically for UHF 12.5kHz channel
-
-  Serial.println("setting default Radio configuration");
-
-
-  // set frequency
-  Serial.println("changing frequency");
-  
-  
-  radio.setFrequency(446000); // in kHz
-  radio.setModeReceive();
-  
-  // configure Arduino LED for
-  pinMode(LED_PIN, OUTPUT);
-  
-  state = MAIN_S;
-  print_menu();
-}
-
-void loop() {  
-  goertzel.sample(sensorPin);
-  float magnitude = goertzel.detect();
-  if(magnitude>THRESHOLD) digitalWrite(led, HIGH); //if found, enable led
-  else digitalWrite(led, LOW); 
-  while (Serial.available()) {
-    if (state == FREQ_S) {
-      char freq_khz[6];
-      int i = 0;
-      while(i < 6) {
-         if (Serial.available()) {
-           freq_khz[i] = Serial.read();
-           i++;
-         }
-      }
-      
-      // interpret frequency
-      uint32_t freq = 0;
-      i = 0;
-      while (i < 6) {
-        uint32_t temp = freq_khz[i] - '0';
-        for (int k = 5-i; k > 0; k--) {
-          temp = temp * 10;
-        }
-        freq += temp;
-        i++;
-      }
-      Serial.print("setting frequency to: ");
-      Serial.println(freq);
-      radio.setFrequency(freq);
-      state = MAIN_S;
-      
-    } else if (state == PWR_S) {
-      uint8_t pwr_raw[3];
-      int i = 0;
-      while(i < 3) {
-        if (Serial.available()) {
-          pwr_raw[i] = Serial.read();
-          i++;
-        }
-      }
-      
-      // interpret power
-      uint8_t pwr = 0;
-      i = 0;
-      while (i < 3) {
-        uint8_t temp = pwr_raw[i] - '0';
-        for (int k = 2-i; k > 0; k--) {
-          temp = temp * 10;
-        }
-        pwr += temp;
-        i++;
-      }
-
-      Serial.print("Setting power to: ");
-      Serial.println(pwr);
-      radio.setRfPower(pwr);
-      state = MAIN_S;
-      
-    } else if (state == GPIO_S) {
-      uint8_t gpio_raw[2];
-      int i = 0;
-      while(i < 2) {
-        if (Serial.available()) {
-          gpio_raw[i] = Serial.read();
-          i++;
-        }
-      }
-      uint16_t gpio_pin = gpio_raw[0] - 48; // '0';
-      uint16_t gpio_mode = gpio_raw[1] - 48;
-
-      radio.setGpioMode(gpio_pin, gpio_mode);
-      state = MAIN_S;      
-      
-    } else {
-      char action = Serial.read();
-      if (action == 'r') { // get current state
-        state = RX_S;
-      } else if (action == 't') { 
-        state = TX_S;
-      } else if (action == 'f') { 
-        state = FREQ_S;
-      } else if (action == 'u') { 
-        state = UHF_S;
-      } else if (action == 'v') { 
-        state = VHF_S;
-      } else if (action == '1') {
-        turn_on(state);
-        state = MAIN_S; 
-      } else if (action == '0') {
-        turn_off(state);
-        state = MAIN_S; 
-      } else if (action == 'p') {
-        state = PWR_S; 
-      } else if (action == 'g') {
-        state = GPIO_S; 
-      } else if (action == 's') {
-        int16_t rssi = radio.readRSSI();
-        Serial.print("rssi: ");
-        Serial.println(rssi); 
-      } else if (action == 'i') {
-        int16_t vssi = radio.readVSSI();
-        Serial.print("vssi: ");
-        Serial.println(vssi); 
-      }
-            
-      Serial.println(action);
-    }
-    Serial.flush();
-    print_menu();
-  }
-}
-
-void turn_off(int dev) {
-  switch (dev) {
-  case RX_S:
-    radio.setRX(0);
-    break;
-  case TX_S:
-    radio.setTX(0);
-    break;
-  case UHF_S:
-    radio.setGpioMode(3, 3); // set GPIO3 high (uhf is active low)
-    break;
-  case VHF_S:
-    radio.setGpioMode(2, 3); // set GPIO2 high (vhf is active low)
-    break;
-  default:
-    break; 
- } 
-}
-
-void turn_on(int dev) {
-  switch (dev) {
-  case RX_S:
-    radio.setRX(1);
-    break;
-  case TX_S:
-    radio.setTX(1);
-    break;
-  case UHF_S:
-    radio.setGpioMode(3, 2); // set GPIO3 low (uhf is active low)
-    break;
-  case VHF_S:
-    radio.setGpioMode(2, 2); // set GPIO2 low (uhf is active low)
-    break;
-  default:
-    break; 
- } 
-}
-
-void print_menu() {
- Serial.println("MENU");
- switch (state) {
-  case MAIN_S:
-    Serial.println("select step: [r]x, [t]x, [f]req, [u]hf, [v]hf, [p]wr, [g]pio control, r[s]si, vss[i] ...");
-    break;
-  case RX_S:
-    Serial.println("enter 1 to turn on rx, 0 to turn off rx");
-    break;
-  case TX_S:
-    Serial.println("enter 1 to turn on tx, 0 to turn off tx");  
-    break;
-  case FREQ_S:
-    Serial.println("enter frequency in kHz (ffffff)");
-    break;
-  case UHF_S:
-    Serial.println("enter 1 to turn on uhf, 0 to turn off uhf");  
-    break;
-  case VHF_S:
-    Serial.println("enter 1 to turn on vhf, 0 to turn off vhf");    
-    break;
-  case PWR_S:
-    Serial.println("enter power (raw) (ppp)");
-    break;
-  case GPIO_S:
-    Serial.println("enter GPIO pin and control (no spaces, eg pin 1 mode 3 is 13");
-    Serial.println("modes 0 - HiZ, 1 - FCN, 2 - Low, 3 - Hi");
-    break;
-  default:
-    state = MAIN_S;
-    break; 
- } 
-}

examples/FixMe/Identifier/Identifier.ino

@@ -1,95 +0,0 @@
-/* 
-
-Indentifier 
-
-Arduino audio overlay example
-
-*/
-
-
-#include <HamShield.h>
-
-#define DOT 100
-
-#define PWM_PIN 3
-#define RESET_PIN A3
-#define SWITCH_PIN 2
-
-HamShield radio;
-
-const char *bascii = "ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.,?'!/()&:;=+-_\"$@",
-  *bitu[] = { ".-","-...","-.-.","-..",".","..-.","--.","....","..",".---","-.-",".-..","--","-.","---",".--.","--.-",".-.","...","-","..-","...-",".--","-..-","-.--","--..","-----",".----","..---","...--","....-",".....","-....","--...","---..","----.",".-.-.-","--..--","..--..",".----.","-.-.--","-..-.","-.--.","-.--.-",".-...","---...","-.-.-.","-...-",".-.-.","-....-","..--.-",".-..-.","...-..-",".--.-."
-  };
-  
-const char *callsign = {"1ZZ9ZZ/B"} ;   
-  
-char morsebuffer[8];  
-  
-void setup() {
-// NOTE: if not using PWM out, it should be held low to avoid tx noise
-  pinMode(PWM_PIN, OUTPUT);
-  digitalWrite(PWM_PIN, LOW);
-  
-  // prep the switch
-  pinMode(SWITCH_PIN, INPUT_PULLUP);
-  
-  // set up the reset control pin
-  pinMode(RESET_PIN, OUTPUT);
-  digitalWrite(RESET_PIN, HIGH);
-  
-  Serial.begin(9600);
-  Serial.println("starting up..");
-
-  Serial.print("Radio status: ");
-  int result = radio.testConnection();
-  Serial.println(result,DEC);
-  radio.initialize();
-  radio.frequency(446000);
-  radio.setVolume1(0xF);
-  radio.setVolume2(0xF);
-  radio.setModeReceive();
-  radio.setTxSourceMic();
-  radio.setSQLoThresh(80);
-  radio.setSQOn();
-  Serial.println("Done with radio beacon setup. Press and hold a key to transmit.");
-}
-
-int state = 0;
-long timer = 0;
-int morseletter = 0;
-int morsesymbol = 0;
-long keyer = 0;
-char symbol;
-
-void loop() { 
-  if(Serial.available() > 0) {
-    if(state == 0) { 
-      state = 10;
-      radio.setModeTransmit();
-      timer = millis();
-      keyer = millis();
-    }
-    if(state == 10) { 
-      timer = millis();
-    }
-  }
-  if(millis() > (timer + 500)) { radio.setModeReceive(); morseletter = 0; morsesymbol = 0; state = 0; }
-  if(state == 10) { 
-    if(millis() > (keyer + (DOT * 3))) { 
-      keyer = millis();
-      symbol = lookup(callsign[morseletter],morsesymbol);
-      if(symbol == '-') { tone(9,1000,DOT*3); } 
-      if(symbol == '.') { tone(9,1000,DOT); } 
-      if(symbol == 0) { morsesymbol = 0; morseletter++; }
-      if(callsign[morseletter] == 0) { morsesymbol = 0; morseletter = 0; }  
-    }
-  }
-}
-
-char lookup(char letter, int morsesymbol) { 
- for(int x = 0; x < 54; x++) { 
-  if(letter == bascii[x]) { 
-    return bitu[x][morsesymbol]; 
-  } 
- }
-}

examples/FoxHunt/FoxHunt.ino

@@ -4,9 +4,10 @@
  * will check to see if the channel is clear before it will 
  * transmit.
  * Connect the HamShield to your Arduino. Screw the antenna 
- * into the HamShield RF jack. Connect the Arduino to wall power and then 
- * to your computer via USB. To test, set a HandyTalkie 
- * to 438MHz. You should hear a one-minute tone every 10-13 minutes.
+ * into the HamShield RF jack. Connect the Arduino to wall 
+ * power and then to your computer via USB. To test, set a 
+ * HandyTalkie to 438MHz. You should hear a one-minute tone 
+ * followed by a callsign every 10-13 minutes.
 */
 
 #include <HamShield.h>

examples/FunctionalTest/FunctionalTest.ino

@@ -6,7 +6,7 @@
  * into the HamShield RF jack. Plug a pair of headphones into 
  * the HamShield. Connect the Arduino to wall power and then 
  * to your computer via USB. After uploading this program to 
- * your adruino, open the Serial Monitor. Serial Monitor will 
+ * your Arduino, open the Serial Monitor. Serial Monitor will 
  * describe what you should be expecting to hear from your 
  * headphones. Tune a HandytTalkie to 446MHz to hear morse 
  * code example.

examples/Gauges/Gauges.ino

@@ -6,7 +6,7 @@
  * into the HamShield RF jack. Plug a pair of headphones into 
  * the HamShield. Connect the Arduino to wall power and then 
  * to your computer via USB. After uploading this program to 
- * your adruino, open the Serial Monitor. You will see a 
+ * your Arduino, open the Serial Monitor. You will see a 
  * repeating display of different signal strengths. Ex: 
  *
  * [....|....] -73       

examples/HAMBot/HAMBot.ino

@@ -1,60 +0,0 @@
-/* Hamshield
- * Example: HAMBot
- * Simple DTMF controlled HAM Radio Robot. You will need 
- * seperate DTMF equipment as well as robot for this 
- * example.
- * Connect the HamShield to your Arduino. Screw the antenna 
- * into the HamShield RF jack. Connect the Arduino to wall 
- * power and then to your computer via USB. After uploading 
- * this program to your adruino, you can send commands from 
- * your DTMF equipment using the following list: 
- * '4' => turn robot left
- * '6' => turn robot right
- * '2' => move robot forward
- * '5' => tell robot to send morse code identity 
-*/ 
-
-#include <ArduinoRobot.h> // include the robot library
-#include <HamShield.h>
-#include <SPI.h>
-
-#define PWM_PIN 3
-#define RESET_PIN A3
-#define SWITCH_PIN 2
-
-HamShield radio;
-
-void setup() {
-  // NOTE: if not using PWM out, it should be held low to avoid tx noise
-  pinMode(PWM_PIN, OUTPUT);
-  digitalWrite(PWM_PIN, LOW);
-  
-  // prep the switch
-  pinMode(SWITCH_PIN, INPUT_PULLUP);
-  
-  // set up the reset control pin
-  pinMode(RESET_PIN, OUTPUT);
-  digitalWrite(RESET_PIN, HIGH);
-  
-  Robot.begin();
-
-  radio.initialize();
-  radio.frequency(145510);
-}
-
-void loop() {
-   if(radio.waitForDTMF()) {                          // wait for a received DTMF tone
-    uint8_t command = radio.getLastDTMFDigit();       // get the last DTMF tone sent
-     if(command == '4') { Robot.turn(-90); }          // turn robot left
-     if(command == '6') { Robot.turn(90); }           // turn robot right
-     if(command == '2') { Robot.motorsWrite(-255,-255); delay(500); Robot.motorsWrite(255, 255); }  // move robot forward
-     if(command == '5') {                             // tell robot to send morse code identity 
-           if(radio.waitForChannel()) {               // wait for the user to release the transmit button
-              radio.setModeTransmit();                // turn on transmit mode
-              radio.morseOut("1ZZ9ZZ I AM HAMRADIO ROBOT");    // send morse code
-              radio.setModeReceive();                 // go back to receive mode on radio 
-           }
-     }
-   }
-}
-

examples/HandyTalkie/HandyTalkie.ino

@@ -6,7 +6,7 @@
  * into the HamShield RF jack. Plug a pair of headphones into 
  * the HamShield. Connect the Arduino to wall power and then 
  * to your computer via USB. After uploading this program to 
- * your adruino, open the Serial Monitor. Press the button on 
+ * your Arduino, open the Serial Monitor. Press the button on 
  * the HamShield to begin setup. After setup is complete, type 
  * your desired Tx/Rx frequency, in hertz, into the bar at the 
  * top of the Serial Monitor and click the "Send" button. 

examples/JustTransmit/JustTransmit.ino

@@ -5,7 +5,7 @@
  * into the HamShield RF jack. Plug a pair of headphones with 
  * built-in mic into the HamShield. Connect the Arduino to 
  * wall power and then to your computer via USB. After 
- * uploading this program to your adruino, open the Serial 
+ * uploading this program to your Arduino, open the Serial 
  * Monitor to monitor the program's progress. After setup is 
  * complete, tune a HandyTalkie (HT) to 144.025MHz. Listen on 
  * the HT for the HamShield broadcasting from the mic.

examples/KISS/KISS.ino

@@ -18,7 +18,6 @@ DDS dds;
 KISS kiss(&Serial, &radio, &dds);
 AFSK afsk;
 
-//TODO: move these into library
 #define PWM_PIN 3
 #define RESET_PIN A3
 #define SWITCH_PIN 2
@@ -45,7 +44,6 @@ void setup() {
   radio.initialize();
   radio.setSQOff();
   radio.frequency(144390);
-  //I2Cdev::writeWord(A1846S_DEV_ADDR_SENLOW, 0x44, 0x05FF);
 
   dds.start();
   afsk.start(&dds);

examples/PSK31Transmit/PSK31Transmit.ino

@@ -5,7 +5,7 @@
  * Connect the HamShield to your Arduino. Screw the antenna 
  * into the HamShield RF jack. Connect the Arduino to wall 
  * power and then to your computer via USB. After uploading 
- * this program to your adruino, tune a PSK31 receiver and 
+ * this program to your Arduino, tune a PSK31 receiver and 
  * wait to receive the message "Why hello there, friend. 
  * Nice to meet you. Welcome to PSK31. 73, VE6SLP sk"
 */

examples/Parrot/Parrot.ino

@@ -1,131 +0,0 @@
-/* Hamshield
- * Example: Parrot
- * Record sound and then plays it back a few times. Very low 
- * sound quality @ 2KHz 0.75 seconds. A bit robotic and weird. 
- * You will need a HandyTalkie (HT) to test the output of this 
- * example.
- * Connect the HamShield to your Arduino. Screw the antenna 
- * into the HamShield RF jack. Plug a pair of headphones into 
- * the HamShield. Connect the Arduino to wall power and then to 
- * your computer via USB. To test the output, tune you HT to 
- * 446MHz. The HamShield should make a recording ofthe next 
- * broadcast on that frequncy. The recording should then be 
- * repeated ten times by the HamShield.
-*/
-
-#include <HamShield.h>
-
-#define PWM_PIN 3
-#define RESET_PIN A3
-#define SWITCH_PIN 2
-
-#define RATE 500
-#define SIZE 1500
-
-HamShield radio;
-
-char sound[SIZE];
-unsigned int sample1;
-int x = -1;
-int16_t rssi;
-byte mode = 8;
-
-void setup() { 
-  // NOTE: if not using PWM out, it should be held low to avoid tx noise
-  pinMode(PWM_PIN, OUTPUT);
-  digitalWrite(PWM_PIN, LOW);
-  
-  // prep the switch
-  pinMode(SWITCH_PIN, INPUT_PULLUP);
-  
-  // set up the reset control pin
-  pinMode(RESET_PIN, OUTPUT);
-  digitalWrite(RESET_PIN, HIGH);
-  
-  // int result = radio.testConnection();
-  radio.initialize();
-  radio.frequency(446000);
-  setPwmFrequency(9, 1);
-}
-
-
-
-void loop() {
-   rssi = radio.readRSSI();
-   if(rssi > -100) {
-     if(x == -1) { 
-       for(x = 0; x < SIZE; x++) {
-       if(mode == 4) { 
-       sample1 = analogRead(2);
-       sound[x] = sample1 >> 4;
-       delayMicroseconds(RATE); x++;
-       sample1 = analogRead(2); 
-       sound[x] = (sample1 & 0xF0) | sound[x];
-       delayMicroseconds(RATE);
-       } else {
-       sound[x] = analogRead(2);
-       delayMicroseconds(RATE); x++;
-       sound[x] = analogRead(2);
-       delayMicroseconds(RATE);
-       }
-      }
-     }
-   }
-   if(rssi < -100) { 
-     if(x == 1500) { 
-       radio.setModeTransmit();
-       delay(500);
-       tone(9,1000,500); delay(750);
-       for(int r = 0; r < 10; r++) { 
-       for(x = 0; x < SIZE; x++) {
-         if(mode == 4) { 
-
-         analogWrite(9,sound[x] << 4);
-         delayMicroseconds(RATE); x++;
-         analogWrite(9,sound[x] & 0xF);
-         delayMicroseconds(RATE); } else { 
-
-         analogWrite(9,sound[x]);
-         delayMicroseconds(RATE); x++;
-         analogWrite(9,sound[x]);
-         delayMicroseconds(RATE);         
-         } 
-       } }
-       tone(9,1000,500); delay(750);
-     radio.setModeReceive();
-     x = -1;
-     }
-   }
-}
-
-void setPwmFrequency(int pin, int divisor) {
-  byte mode;
-  if(pin == 5 || pin == 6 || pin == 9 || pin == 10) {
-    switch(divisor) {
-      case 1: mode = 0x01; break;
-      case 8: mode = 0x02; break;
-      case 64: mode = 0x03; break;
-      case 256: mode = 0x04; break;
-      case 1024: mode = 0x05; break;
-      default: return;
-    }
-    if(pin == 5 || pin == 6) {
-      TCCR0B = TCCR0B & 0b11111000 | mode;
-    } else {
-      TCCR1B = TCCR1B & 0b11111000 | mode;
-    }
-  } else if(pin == 3 || pin == 11) {
-    switch(divisor) {
-      case 1: mode = 0x01; break;
-      case 8: mode = 0x02; break;
-      case 32: mode = 0x03; break;
-      case 64: mode = 0x04; break;
-      case 128: mode = 0x05; break;
-      case 256: mode = 0x06; break;
-      case 1024: mode = 0x7; break;
-      default: return;
-    }
-    TCCR2B = TCCR2B & 0b11111000 | mode;
-  }
-}
-

examples/QPSK63Transmit/QPSK63Transmit.ino

@@ -5,7 +5,7 @@
  * Connect the HamShield to your Arduino. Screw the antenna 
  * into the HamShield RF jack. Connect the Arduino to wall 
  * power and then to your computer via USB. After uploading 
- * this program to your adruino, tune a QPSK63 receiver and 
+ * this program to your Arduino, tune a QPSK63 receiver and 
  * wait to receive the message "Why hello there, friend. 
  * Nice to meet you. Welcome to QPSK63. 73, VE6SLP sk"
 */

examples/SSTV/SSTV.ino

@@ -5,7 +5,7 @@
  * Connect the HamShield to your Arduino. Screw the antenna 
  * into the HamShield RF jack. Connect the Arduino to wall 
  * power and then to your computer via USB. After uploading 
- * this program to your adruino, open the Serial Monitor to 
+ * this program to your Arduino, open the Serial Monitor to 
  * view the status of the program. Tune your SSTV to 
  * 446MHz to receive the image output.
 */

examples/SSTV_M1_Static/SSTV_M1_Static.ino

@@ -5,7 +5,7 @@
  * Connect the HamShield to your Arduino. Screw the antenna 
  * into the HamShield RF jack. Connect the Arduino to wall 
  * power and then to your computer via USB. After uploading 
- * this program to your adruino, open the Serial Monitor to 
+ * this program to your Arduino, open the Serial Monitor to 
  * view the status of the program. Tune your SSTV to 
  * 145.5MHz to receive the image output.
 */

examples/SerialTransceiver/SerialTransceiver.ino

@@ -6,7 +6,7 @@
  * into the HamShield RF jack. Plug a pair of headphones into 
  * the HamShield. Connect the Arduino to wall power and then 
  * to your computer via USB. After uploading this program to 
- * your adruino, open the Serial Monitor. Use the bar at the 
+ * your Arduino, open the Serial Monitor. Use the bar at the 
  * top of the serial monitor to enter commands as seen below.
  * 
  * EXAMPLE: To change the repeater offset to 144.425MHz, 
@@ -21,28 +21,14 @@ Mode           ASCII       Description
 -------------- ----------- -------------------------------------------------------------------------------------------------------------------------------------------- -----------------
 Transmit       space       Space must be received at least every 500 mS                                                                                                 Yes
 Receive        not space   If space is not received and/or 500 mS timeout of space occurs, unit will go into receive mode                                               Yes
-CTCSS In       A<tone>;    <tone> must be a numerical ascii value with decimal point indicating CTCSS receive tone required to unsquelch                                No
-CTCSS Out      B<tone>;    <tone> must be a numerical ascii value with decimal point indicating CTCSS transmit tone                                                     No
-CTCSS Enable   C<state>;   Turns on CTCSS mode (analog tone) with 1, off with 0.                                                                                        No
-CDCSS Enable   D<state>;   Turns on CDCSS mode (digital tone) with 1, off with 0.                                                                                       No
 Bandwidth      E<mode>;    for 12.5KHz mode is 0, for 25KHz, mode is 1                                                                                                  No
 Frequency      F<freq>;    Set the receive frequency in KHz, if offset is disabled, this is the transmit frequency                                                      No
-CDCSS In       G<code>;    <code> must be a valid CDCSS code                                                                                                            No
-CDCSS Out      H<code>;    <code> must be a valid CDCSS code                                                                                                            No
-Print tones    I           Prints out all configured tones and codes, coma delimited in format: CTCSS In, CTCSS Out, CDCSS In, CDCSS Out                                No
 Morse Out      M<text>;    A small buffer for morse code (32 chars)
 Power level    P<level>;   Set the power amp level, 0 = lowest, 15 = highest                                                                                           No
 Enable Offset  R<state>;   1 turns on repeater offset mode, 0 turns off repeater offset mode                                                                            No
 Squelch        S<level>;   Set the squelch level                                                                                                                        No
 TX Offset      T<freq>;    The absolute frequency of the repeater offset to transmit on in KHz                                                                          No
-Volume         V<level>;   Set the volume level of the receiver                                                                                                         No
-Reset          X           Reset all settings to default                                                                                                                No
-Sleep          Z           Sleep radio                                                                                                                                  No
-Filters        @<state>;   Set bit to enable, clear bit to disable: 0 = pre/de-emphasis, 1 = high pass filter, 2 = low pass filter (default:  ascii 7, all enabled)     No
-Vox mode       $<state>;   0 = vox off, >= 1 audio sensitivity. lower value more sensitive                                                                              No
-Mic Channel    *<state>;   Set the voice channel. 0 = signal from mic or arduino, 1 = internal tone generator                                                           No
 RSSI           ?           Respond with the current receive level in - dBm (no sign provided on numerical response)                                                     No
-Tone Gen       % (notes)   To send a tone, use the following format: Single tone: %1,<freq>,<length>; Dual tone: %2,<freq>,<freq>,<length>; DTMF: %3,<key>,<length>;    No
 Voice Level    ^           Respond with the current voice level (VSSI)
 
 

examples/SignalTest/SignalTest.ino

@@ -9,7 +9,7 @@
  * into the HamShield RF jack. Plug a pair of headphones into 
  * the HamShield. Connect the Arduino to wall power and then 
  * to your computer via USB. After uploading this program to 
- * your adruino, open the Serial Monitor. HamShield will print 
+ * your Arduino, open the Serial Monitor. HamShield will print 
  * the results of its signal test to the Serial Monitor. To 
  * test with another HandyTalkie (HT), tune in to 446MHz and 
  * listen for the call sign. Then key up on your HT and make