third-party
/
HamShield
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Fix second half of table

James Churchill 2016-06-27 16:40:13 +10:00
parent 5346441097
commit d6b957857f
1 changed files with 12 additions and 16 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

28
HamShield-Serial-Mode.md

@ -20,20 +20,16 @@ HamShield Serial Interface Commands
<tr><Td>CDCSS Out</td><td>H[code];</td><td>Code must be a valid CDCSS code</td></tr> <tr><Td>CDCSS Out</td><td>H[code];</td><td>Code must be a valid CDCSS code</td></tr>
<tr><td>Print Config</td><td>I</td><td>Print out all configurations in comma delimited format.</td></tr> <tr><td>Print Config</td><td>I</td><td>Print out all configurations in comma delimited format.</td></tr>
<tr><td>Power Level</td><td>P[level];</td><td>Set power amp level, 0 = lowest, 15 = highest</td></tr> <tr><td>Power Level</td><td>P[level];</td><td>Set power amp level, 0 = lowest, 15 = highest</td></tr>
<tr><td>Enable Offset</td><td>R[state];</td><td>1 turns on repeater offset mode, 0 turns off repeater offset mode</td></tr>
<tr><td>Squelch</td><td>S[level];</td><td>Set the squelch level</td></tr>
<tr><td>TX Offset</td><td>T[freq];</td><td>The absolute frequency of the repeater offset to transmit on in KHz</td></tr>
<tr><td>Volume</td><td>V[level];</td><td>Set the volume level of the receiver</td></tr>
<tr><td>Reset</td><td>X</td><td>Reset all settings to default</td></tr>
<tr><td>Sleep</td><td>Z</td><td>Sleep radio
<tr><td>Filters</td><td>@[state];</td><td>Set bit to enable, clear bit to disable: 0 = pre/de-emphasis, 1 = high pass filter, 2 = low pass filter (default: ascii 7, all enabled)</td></tr>
<tr><td>Vox mode</td><td>$[state];</td><td>0 = vox off, >= 1 audio sensitivity. lower value more sensitive</td></tr>
<tr><td>Mic Channel</td><td>*[state];</td><td>Set the voice channel. 0 = signal from mic or arduino, 1 = internal tone generator</td></tr>
<tr><td>RSSI</td><td>?</td><td>Respond with the current receive level in - dBm (no sign provided on numerical response)</td></tr>
<tr><td>Tone Gen</td><td>%[notes]</td><td>To send a tone, use the following format: Single tone: %1,[freq],[length]; Dual tone: %2,[freq],[freq],[length]; DTMF: %3,[key],[length];</td></tr>
<tr><td>Voice Level</td><td>^</td><td>Respond with the current voice level (VSSI)</td></tr>
</table> </table>
Enable Offset R<state>; 1 turns on repeater offset mode, 0 turns off repeater offset mode No
Squelch S<level>; Set the squelch level No
TX Offset T<freq>; The absolute frequency of the repeater offset to transmit on in KHz No
Volume V<level>; Set the volume level of the receiver No
Reset X Reset all settings to default No
Sleep Z Sleep radio No
Filters @<state>; Set bit to enable, clear bit to disable: 0 = pre/de-emphasis, 1 = high pass filter, 2 = low pass filter (default: ascii 7, all enabled) No
Vox mode $<state>; 0 = vox off, >= 1 audio sensitivity. lower value more sensitive No
Mic Channel *<state>; Set the voice channel. 0 = signal from mic or arduino, 1 = internal tone generator No
RSSI ? Respond with the current receive level in - dBm (no sign provided on numerical response) No
Tone Gen % (notes) To send a tone, use the following format: Single tone: %1,<freq>,<length>; Dual tone: %2,<freq>,<freq>,<length>; DTMF: %3,<key>,<length>; No
Voice Level ^ Respond with the current voice level (VSSI)
`