kyleandClaude Sonnet 5.5
720a7cfc34
CONTEXT.md had grown by appending and contradicted itself (all four nodes vs six, a retracted CPU figure, "no calibration", "nobody enrolled", "audio untested as a service", the Wi-Fi-off boot as not done, a class the tracker replaced). Rewritten as one current-state document organised by subsystem, with fresh measurements, the owner's decisions, the gotchas, the neck's arrival-day plan and what is genuinely still open. README: status, speakers not fitted, new-session note for Hermes, the calibration section (shipped calibration, coverage hints, outlier dropping, --from-views), running the tests, the docs row. HANDOFF.md gets a status banner listing where the original brief has drifted. CLAUDE.md starts at CONTEXT.md. The echo-cancel config no longer talks about a Pi Zero, and the enclosure guide no longer tells you to centre a servo with a tool that does not exist yet. pi/network-config.example is a tracked, credentials-free first-boot template: the README pointed at pi/50-cloud-init.yaml, which is gitignored and so missing from a fresh clone. The dead IdentityCache (replaced by the tracker) is removed. Docstrings corrected: audio scope publishing, the MCP health topics, and what the calibration tool does. Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01AFN8nRRCiDiMN7ChBpHJhs
25 lines
893 B
Plaintext
25 lines
893 B
Plaintext
# Example first-boot network config for the Pi, with Wi-Fi. COPY it to `network-config` on the card's
|
|
# `system-boot` partition and fill in SSID and PASSWORD (or keep a filled copy outside the repo:
|
|
# `pi/50-cloud-init.yaml` is gitignored for that, because it holds your password).
|
|
#
|
|
# cloud-init applies this on the FIRST boot only. To change Wi-Fi later, edit
|
|
# /etc/netplan/50-cloud-init.yaml on the Pi (mode 600, owner root), or bump `instance_id` in `meta-data`
|
|
# on the boot partition to force a fresh first boot.
|
|
# Spaces only, no tabs. Quote the SSID and password.
|
|
network:
|
|
version: 2
|
|
|
|
ethernets:
|
|
eth0:
|
|
dhcp4: true
|
|
optional: true
|
|
|
|
wifis:
|
|
wlan0:
|
|
dhcp4: true
|
|
optional: false
|
|
regulatory-domain: US # set your country: the Pi may refuse some 5 GHz channels without it
|
|
access-points:
|
|
"SSID":
|
|
password: "PASSWORD"
|