use ths branch for old HS04 boards

removed old setrx/settx stuff

AFSK.cpp

@@ -0,0 +1,738 @@
+#include <Arduino.h>
+#include "HamShield.h"
+#include "SimpleFIFO.h"
+#include <util/atomic.h>
+
+#define PHASE_BIT 8
+#define PHASE_INC 1
+
+#define PHASE_MAX (SAMPLEPERBIT * PHASE_BIT)
+#define PHASE_THRES (PHASE_MAX / 2)
+
+#define BIT_DIFFER(bitline1, bitline2) (((bitline1) ^ (bitline2)) & 0x01)
+#define EDGE_FOUND(bitline)            BIT_DIFFER((bitline), (bitline) >> 1)
+
+#define PPOOL_SIZE 2
+
+#define AFSK_SPACE 2200
+#define AFSK_MARK  1200
+
+// Timers
+volatile unsigned long lastTx = 0;
+volatile unsigned long lastTxEnd = 0;
+volatile unsigned long lastRx = 0;
+
+#define T_BIT ((unsigned int)(SAMPLERATE/BITRATE))
+
+#ifdef PACKET_PREALLOCATE
+SimpleFIFO<AFSK::Packet *,PPOOL_SIZE> preallocPool;
+AFSK::Packet preallocPackets[PPOOL_SIZE];
+#endif
+
+void AFSK::Encoder::process() {
+  // We're on the start of a byte position, so fetch one
+  if(bitPosition == 0) {
+    if(preamble) { // Still in preamble
+      currentByte = HDLC_PREAMBLE;
+      --preamble; // Decrement by one
+    } else {
+      if(!packet) { // We aren't on a packet, grab one
+        // Unless we already sent enough
+        if(maxTx-- == 0) {
+          stop();
+          lastTxEnd = millis();
+          return;
+        }
+        packet = pBuf.getPacket();
+        if(!packet) { // There actually weren't any
+          stop(); // Stop transmitting and return
+          lastTxEnd = millis();
+          return;
+        }
+        lastTx = millis();
+        currentBytePos = 0;
+        nextByte = HDLC_FRAME; // Our next output should be a frame boundary
+        hdlc = true;
+      }
+  
+      // We ran out of actual data, provide an HDLC frame (idle)
+      if(currentBytePos == packet->len && nextByte == 0) {
+        // We also get here if nextByte isn't set, to handle empty frames
+        pBuf.freePacket(packet);
+        packet = pBuf.getPacket(); // Get the next, if any
+        //packet = NULL;
+        currentBytePos = 0;
+        nextByte = 0;
+        currentByte = HDLC_FRAME;
+        hdlc = true;
+      } else {
+        if(nextByte) {
+          // We queued up something other than the actual stream to be sent next
+          currentByte = nextByte;
+          nextByte = 0;
+        } else {
+          // Get the next byte to send, but if it's an HDLC frame, escape it
+          // and queue the real byte for the next cycle.
+          currentByte = packet->getByte();
+          if(currentByte == HDLC_FRAME) {
+            nextByte = currentByte;
+            currentByte = HDLC_ESCAPE;
+          } else {
+            currentBytePos++;
+          }
+          hdlc = false; // If we get here, it will be NRZI bit stuffed
+        }
+      }
+    }
+  }
+
+  // Pickup the last bit
+  currentBit = currentByte & 0x1;    
+
+  if(lastZero == 5) {
+    currentBit = 0; // Force a 0 bit output
+  } else {
+    currentByte >>= 1; // Bit shift it right, for the next round
+    ++bitPosition; // Note our increase in position
+  }
+
+  // To handle NRZI 5 bit stuffing, count the bits
+  if(!currentBit || hdlc)
+    lastZero = 0;
+  else
+    ++lastZero;
+
+  // NRZI and AFSK uses toggling 0s, "no change" on 1
+  // So, if not a 1, toggle to the opposite tone
+  if(!currentBit)
+    currentTone = !currentTone;
+  
+  if(currentTone == 0) {
+    PORTD |= _BV(7);
+    dds->setFrequency(AFSK_SPACE);
+  } else {
+    PORTD &= ~_BV(7);
+    dds->setFrequency(AFSK_MARK);
+  }
+}
+
+bool AFSK::Encoder::start() {
+  if(!done || sending) {
+    return false;
+  }
+  
+  if(randomWait > millis()) {
+    return false;
+  }
+  
+  // First real byte is a frame
+  currentBit = 0;
+  lastZero = 0;
+  bitPosition = 0;
+  //bitClock = 0;
+  preamble = 0b110000; // 6.7ms each, 23 = 153ms
+  done = false;
+  hdlc = true;
+  packet = 0x0; // No initial packet, find in the ISR
+  currentBytePos = 0;
+  maxTx = 3;
+  sending = true;
+  nextByte = 0;
+  dds->setFrequency(0);
+  dds->on();
+  return true;
+}
+
+void AFSK::Encoder::stop() {
+  randomWait = 0;
+  sending = false;
+  done = true;
+  dds->setFrequency(0);
+  dds->off();
+}
+
+AFSK::Decoder::Decoder() {
+  // Initialize the sampler delay line (phase shift)
+  //for(unsigned char i = 0; i < SAMPLEPERBIT/2; i++)
+  //  delay_fifo.enqueue(0);
+}
+
+bool AFSK::HDLCDecode::hdlcParse(bool bit, SimpleFIFO<uint8_t,HAMSHIELD_AFSK_RX_FIFO_LEN> *fifo) {
+  bool ret = true;
+  
+  demod_bits <<= 1;
+  demod_bits |= bit ? 1 : 0;
+  
+  // Flag
+  if(demod_bits == HDLC_FRAME) {
+    fifo->enqueue(HDLC_FRAME);
+    rxstart = true;
+    currchar = 0;
+    bit_idx = 0;
+    return ret;
+  }
+  
+  // Reset
+  if((demod_bits & HDLC_RESET) == HDLC_RESET) {
+    rxstart = false;
+    lastRx = millis();
+    return ret;
+  }
+  if(!rxstart) {
+    return ret;
+  }
+  
+  // Stuffed?
+  if((demod_bits & 0x3f) == 0x3e)
+    return ret;
+  
+  if(demod_bits & 0x01)
+    currchar |= 0x80;
+  
+  if(++bit_idx >= 8) {
+    if(currchar == HDLC_FRAME ||
+      currchar == HDLC_RESET ||
+      currchar == HDLC_ESCAPE) {
+        fifo->enqueue(HDLC_ESCAPE);
+      }
+    fifo->enqueue(currchar & 0xff);
+    currchar = 0;
+    bit_idx = 0;
+  } else {
+    currchar >>= 1;
+  }  
+
+  return ret;
+}
+
+template <typename T, int size>
+class FastRing {
+private:
+  T ring[size];
+  uint8_t position;
+public:
+  FastRing(): position(0) {}
+  inline void write(T value) {
+    ring[(position++) & (size-1)] = value;
+  }
+  inline T read() const {
+    return ring[position & (size-1)];
+  }
+  inline T readn(uint8_t n) const {
+    return ring[(position + (~n+1)) & (size-1)];
+  }
+};
+// Create a delay line that's half the length of the bit cycle (-90 degrees)
+FastRing<uint8_t,(T_BIT/2)> delayLine;
+
+// Handle the A/D converter interrupt (hopefully quickly :)
+void AFSK::Decoder::process(int8_t curr_sample) {
+  // Run the same through the phase multiplier and butterworth filter
+  iir_x[0] = iir_x[1];
+  iir_x[1] = ((int8_t)delayLine.read() * curr_sample) >> 2;
+  iir_y[0] = iir_y[1];
+  iir_y[1] = iir_x[0] + iir_x[1] + (iir_y[0] >> 1) + (iir_y[0]>>3) + (iir_y[0]>>5);
+  
+  // Place this ADC sample into the delay line
+  delayLine.write(curr_sample);
+
+  // Shift the bit into place based on the output of the discriminator
+  sampled_bits <<= 1;
+  sampled_bits |= (iir_y[1] > 0) ? 1 : 0;  
+  
+  // If we found a 0/1 transition, adjust phases to track
+  if(EDGE_FOUND(sampled_bits)) {
+    if(curr_phase < PHASE_THRES)
+      curr_phase += PHASE_INC;
+    else
+      curr_phase -= PHASE_INC;
+  }
+  
+  // Move ahead in phase
+  curr_phase += PHASE_BIT;
+  
+  // If we've gone over the phase maximum, we should now have some data
+  if(curr_phase >= PHASE_MAX) {
+    curr_phase %= PHASE_MAX;
+    found_bits <<= 1;
+    
+    // If we have 3 bits or more set, it's a positive bit
+    register uint8_t bits = sampled_bits & 0x07;
+    if(bits == 0x07 || bits == 0x06 || bits == 0x05 || bits == 0x03) {
+      found_bits |= 1;
+    }
+    
+    hdlc.hdlcParse(!EDGE_FOUND(found_bits), &rx_fifo); // Process it
+  }
+}
+  
+// This routine uses a pre-allocated Packet structure
+// to save on the memory requirements of the stream data
+bool AFSK::Decoder::read() {
+  bool retVal = false;
+  if(!currentPacket) { // We failed a prior memory allocation
+    currentPacket = pBuf.makePacket(PACKET_MAX_LEN);
+    if(!currentPacket) // Still nothing
+      return false;
+  }
+  // While we have AFSK receive FIFO bytes...
+  while(rx_fifo.count()) {
+    // Grab the character
+    char c = rx_fifo.dequeue();
+    bool escaped = false;
+    if(c == HDLC_ESCAPE) { // We received an escaped byte, mark it
+      escaped = true;
+      // Do we want to keep HDLC_ESCAPEs in the packet?
+      //currentPacket->append(HDLC_ESCAPE); // Append without FCS
+      c = rx_fifo.dequeue(); // Reset to the next character
+    }
+    
+    // Append all the bytes
+    // This will include unescaped HDLC_FRAME bytes
+    if(c != HDLC_FRAME || escaped) // Append frame if it is escaped
+      currentPacket->appendFCS(c); // Escaped characters and all else go into FCS
+    
+    if(currentPacket->len > PACKET_MAX_LEN) {
+      // We've now gone too far and picked up far too many bytes
+      // Cancel this frame, start back at the beginning
+      currentPacket->clear();
+      continue;
+    }
+    
+    // We have a frame boundary, if it isn't escaped
+    // If it's escaped, it was part of the data stream
+    if(c == HDLC_FRAME && !escaped) {
+      if(!currentPacket->len) {
+        currentPacket->clear(); // There wasn't any data, restart stream
+        continue;
+      } else {
+        // We have some bytes in stream, check it meets minimum payload length
+        // Min payload is 1 (flag) + 14 (addressing) + 2 (control/PID) + 1 (flag)
+        if(currentPacket->len >= 16) {          
+          // We should end up here with a valid FCS due to the appendFCS
+          if(currentPacket->crcOK()) { // Magic number for the CRC check passing
+            // Valid frame, so, let's filter for control + PID
+            // Maximum search distance is 71 bytes to end of the address fields
+            // Skip the HDLC frame start
+            bool filtered = false;
+            for(unsigned char i = 0; i < (currentPacket->len<70?currentPacket->len:71); ++i) {
+              if((currentPacket->getByte() & 0x1) == 0x1) { // Found a byte with LSB set
+                // which marks the final address payload
+                // next two bytes should be the control/PID
+                //if(currentPacket->getByte() == 0x03 && currentPacket->getByte() == 0xf0) {
+                  filtered = true;
+                  break; // Found it
+                //}
+              }
+            }
+            
+            if(!filtered) {
+              // Frame wasn't one we care about, discard
+              currentPacket->clear();
+              continue;
+            }
+            
+            // It's all done and formatted, ready to go
+            currentPacket->ready = 1;
+            if(!pBuf.putPacket(currentPacket)) // Put it in the receive FIFO
+              pBuf.freePacket(currentPacket); // Out of FIFO space, so toss it
+            
+            // Allocate a new one of maximum length
+            currentPacket = pBuf.makePacket(PACKET_MAX_LEN);
+            retVal = true;
+          }
+        }
+      }
+      // Restart the stream
+      currentPacket->clear();
+    }
+  }
+  return retVal; // This is true if we parsed a packet in this flow
+}
+  
+void AFSK::Decoder::start() {
+  // Do this in start to allocate our first packet
+  currentPacket = pBuf.makePacket(PACKET_MAX_LEN);
+/*  ASSR &= ~(_BV(EXCLK) | _BV(AS2));
+
+  // Do non-inverting PWM on pin OC2B (arduino pin 3) (p.159).
+  // OC2A (arduino pin 11) stays in normal port operation:
+  // COM2B1=1, COM2B0=0, COM2A1=0, COM2A0=0
+  // Mode 1 - Phase correct PWM
+  TCCR2A = (TCCR2A | _BV(COM2B1)) & ~(_BV(COM2B0) | _BV(COM2A1) | _BV(COM2A0)) |
+           _BV(WGM21) | _BV(WGM20);
+  // No prescaler (p.162)
+  TCCR2B = (TCCR2B & ~(_BV(CS22) | _BV(CS21))) | _BV(CS20) | _BV(WGM22);
+  
+  OCR2A = pow(2,COMPARE_BITS)-1;
+  OCR2B = 0;
+  // Configure the ADC and Timer1 to trigger automatic interrupts
+  TCCR1A = 0;
+  TCCR1B = _BV(CS11) | _BV(WGM13) | _BV(WGM12);
+  ICR1 = ((F_CPU / 8) / REFCLK) - 1;
+  ADMUX = _BV(REFS0) | _BV(ADLAR) | 0; // Channel 0, shift result left (ADCH used)
+  DDRC &= ~_BV(0);
+  PORTC &= ~_BV(0);
+  DIDR0 |= _BV(0);
+  ADCSRB = _BV(ADTS2) | _BV(ADTS1) | _BV(ADTS0);
+  ADCSRA = _BV(ADEN) | _BV(ADSC) | _BV(ADATE) | _BV(ADIE) | _BV(ADPS2); // | _BV(ADPS0);  */
+}
+  
+AFSK::PacketBuffer::PacketBuffer() {
+  nextPacketIn = 0;
+  nextPacketOut = 0;
+  inBuffer = 0;
+  for(unsigned char i = 0; i < PACKET_BUFFER_SIZE; ++i) {
+    packets[i] = 0x0;
+  }
+#ifdef PACKET_PREALLOCATE
+  for(unsigned char i = 0; i < PPOOL_SIZE; ++i) {
+    // Put some empty packets in the FIFO
+    preallocPool.enqueue(&preallocPackets[i]);
+  }
+#endif
+}
+
+unsigned char AFSK::PacketBuffer::readyCount() volatile {
+  unsigned char i;
+  unsigned int cnt = 0;
+  ATOMIC_BLOCK(ATOMIC_RESTORESTATE) {
+    for(i = 0; i < PACKET_BUFFER_SIZE; ++i) {
+      if(packets[i] && packets[i]->ready)
+        ++cnt;
+    }
+  }  
+  return cnt;
+}
+  
+// Return NULL on empty packet buffers
+AFSK::Packet *AFSK::PacketBuffer::getPacket() volatile {
+  unsigned char i = 0;
+  AFSK::Packet *p = NULL;
+  
+  ATOMIC_BLOCK(ATOMIC_RESTORESTATE) {
+    if(inBuffer == 0) {
+      return 0x0;
+    }
+    
+    do {
+      p = packets[nextPacketOut];
+      if(p) {
+        packets[nextPacketOut] = 0x0;
+        --inBuffer;
+      }
+      nextPacketOut = ++nextPacketOut % PACKET_BUFFER_SIZE;
+      ++i;
+    } while(!p && i<PACKET_BUFFER_SIZE);
+    
+    // Return whatever we found, if anything
+  }  
+  return p;
+}
+  
+//void Packet::init(uint8_t *buf, unsigned int dlen, bool freeData) {
+void AFSK::Packet::init(unsigned short dlen) {
+  //data = (unsigned char *)buf;
+  ready = 0;
+#ifdef PACKET_PREALLOCATE
+  freeData = 0;
+  maxLen = PACKET_MAX_LEN; // Put it here instead
+#else
+  freeData = 1;
+  dataPtr = (uint8_t *)malloc(dlen+16);
+  maxLen = dlen; // Put it here instead
+#endif
+  type = PACKET_STATIC;
+  len = 0; // We had a length, but don't put it here.
+  dataPos = dataPtr;
+  readPos = dataPtr;
+  fcs = 0xffff;
+}
+  
+// Allocate a new packet with a data buffer as set
+AFSK::Packet *AFSK::PacketBuffer::makePacket(unsigned short dlen) {
+  AFSK::Packet *p;
+  ATOMIC_BLOCK(ATOMIC_RESTORESTATE) {
+    //Packet *p = findPooledPacket();
+#ifdef PACKET_PREALLOCATE
+    if(preallocPool.count())
+      p = preallocPool.dequeue();
+    else p = NULL;
+#else
+    p = new Packet(); //(Packet *)malloc(sizeof(Packet));
+#endif
+    if(p) // If allocated
+      p->init(dlen);
+  }
+  return p; // Passes through a null on failure.
+}
+  
+// Free a packet struct, mainly convenience
+void AFSK::PacketBuffer::freePacket(Packet *p) {
+  if(!p)
+    return;
+  ATOMIC_BLOCK(ATOMIC_RESTORESTATE) {
+#ifdef PACKET_PREALLOCATE
+    preallocPool.enqueue(p);
+#else
+    p->free();
+    /*unsigned char i;
+    for(i = 0; i < PPOOL_SIZE; ++i)
+    if(p == &(pPool[i]))
+    break;
+    if(i < PPOOL_SIZE)
+    pStatus &= ~(1<<i);*/
+    delete p;
+#endif
+  }  
+}
+  
+// Put a packet onto the buffer array
+bool AFSK::PacketBuffer::putPacket(Packet *p) volatile {
+  ATOMIC_BLOCK(ATOMIC_RESTORESTATE) {
+    if(inBuffer >= PACKET_BUFFER_SIZE) {
+      return false;
+    }
+    packets[nextPacketIn] = p;
+    nextPacketIn = ++nextPacketIn % PACKET_BUFFER_SIZE;
+    ++inBuffer;
+  }  
+  return true;
+}
+  
+// Print a single byte to the data array
+size_t AFSK::Packet::write(uint8_t c) {
+  return (appendFCS(c)?1:0);
+}
+  
+size_t AFSK::Packet::write(const uint8_t *ptr, size_t len) {
+  size_t i;
+  for(i = 0; i < len; ++i)
+    if(!appendFCS(ptr[i]))
+      break;
+  return i;
+}
+
+// Add a callsign, flagged as source, destination, or digi
+// Also tell the routine the SSID to use and if this is the final callsign
+size_t AFSK::Packet::appendCallsign(const char *callsign, uint8_t ssid, bool final) {
+  uint8_t i;
+  for(i = 0; i < strlen(callsign) && i < 6; i++) {
+    appendFCS(callsign[i]<<1);
+  }
+  if(i < 6) {
+    for(;i<6;i++) {
+      appendFCS(' '<<1);
+    }
+  }
+  uint8_t ssidField = (ssid&0xf) << 1;
+  // TODO: Handle digis in the address C bit
+  if(final) {
+    ssidField |= 0b01100001;
+  } else {
+    ssidField |= 0b11100000;
+  }
+  appendFCS(ssidField);
+}
+
+#ifdef PACKET_PARSER
+// Process the AX25 frame and turn it into a bunch of useful strings
+bool AFSK::Packet::parsePacket() {
+  uint8_t *d = dataPtr;
+  int i;
+  
+  // First 7 bytes are destination-ssid
+  for(i = 0; i < 6; i++) {
+    dstCallsign[i] = (*d++)>>1;
+    if(dstCallsign[i] == ' ') {
+      dstCallsign[i] = '\0';
+    }
+  }
+  dstCallsign[6] = '\0';
+  dstSSID = ((*d++)>>1) & 0xF;
+  
+  // Next 7 bytes are source-ssid
+  for(i = 0; i < 6; i++) {
+    srcCallsign[i] = (*d++)>>1;
+    if(srcCallsign[i] == ' ') {
+      srcCallsign[i] = '\0';
+    }
+  }
+  srcCallsign[6] = '\0';
+  srcSSID = *d++; // Don't shift yet, we need the LSB
+  
+  digipeater[0][0] = '\0'; // Set null in case we have none anyway
+  if((srcSSID & 1) == 0) { // Not the last address field 
+    int digi; // Which digi we're on
+    for(digi = 0; digi < 8; digi++) {
+      for(i = 0; i < 6; i++) {
+        digipeater[digi][i] = (*d++)>>1;
+        if(digipeater[digi][i] == ' ') {
+          digipeater[digi][i] = '\0';
+        }
+      }
+      uint8_t last = (*d) & 1;
+      digipeaterSSID[digi] = ((*d++)>>1) & 0xF;
+      if(last == 1)
+        break;
+    }
+    digipeater[digi][6] = '\0';
+    for(digi += 1; digi<8; digi++) { // Empty out the rest of them
+      digipeater[digi][0] = '\0';
+    }
+  }
+  
+  // Now handle the SSID itself
+  srcSSID >>= 1;
+  srcSSID &= 0xF;
+  
+  // After the address parsing, we end up on the control field
+  control = *d++;
+  // We have a PID if control type is U or I
+  // Control & 1 == 0 == I frame
+  // Control & 3 == 3 == U frame
+  if((control & 1) == 0 || (control & 3) == 3)
+    pid = *d++;
+  else pid = 0;
+  
+  // If there is no PID, we have no data
+  if(!pid) {
+    iFrameData = NULL;
+    return true;
+  }
+  
+  // At this point, we've walked far enough along that data is just at d
+  iFrameData = d;
+  
+  // Cheat a little by setting the first byte of the FCS to 0, making it a string
+  // First FCS byte is found at -2, HDLC flags aren't in this buffer
+  dataPtr[len-2] = '\0';
+  
+  return true;
+}
+#endif
+
+void AFSK::Packet::printPacket(Stream *s) {
+  uint8_t i;
+#ifdef PACKET_PARSER
+  if(!parsePacket()) {
+    s->print(F("Packet not valid"));
+    return;
+  }
+  
+  s->print(srcCallsign);
+  if(srcSSID > 0) {
+    s->write('-');
+    s->print(srcSSID);
+  }
+  s->print(F(" > "));
+  s->print(dstCallsign);
+  if(dstSSID > 0) {
+    s->write('-');
+    s->print(dstSSID);
+  }
+  s->write(' ');
+  if(digipeater[0][0] != '\0') {
+    s->print(F("via "));
+    for(i = 0; i < 8; i++) {
+      if(digipeater[i][0] == '\0')
+        break;
+      s->print(digipeater[i]);
+      if(digipeaterSSID[i] != 0) {
+        s->write('-');
+        s->print(digipeaterSSID[i]);
+      }
+      if((digipeaterSSID[i] & _BV(7)) == _BV(7)) {
+        s->write('*'); // Digipeated already
+      }
+      // If we might have more, check to add a comma
+      if(i < 7 && digipeater[i+1][0] != '\0') {
+        s->write(',');
+      }
+      s->write(' ');
+    }
+  }
+  
+  // This is an S frame, we can only print control info
+  if(control & 3 == 1) {
+    switch((control>>2)&3) {
+      case 0:
+        s->print(F("RR"));
+        break;
+      case 1:
+        s->print(F("RNR"));
+        break;
+      case 2:
+        s->print(F("REJ"));
+        break;
+      case 3: // Undefined
+        s->print(F("unk"));
+        break;
+    }
+    // Use a + to indicate poll bit
+    if(control & _BV(4) == _BV(4)) {
+      s->write('+');
+    }
+  } else if((control & 3) == 3) { // U Frame
+    s->print(F("U("));
+    s->print(control, HEX);
+    s->write(',');
+    s->print(pid, HEX);
+    s->print(F(") "));
+  } else if((control & 1) == 0) { // I Frame
+    s->print(F("I("));
+    s->print(control, HEX);
+    s->write(',');
+    s->print(pid, HEX);
+    s->print(F(") "));
+  }
+  s->print(F("len "));
+  s->print(len);
+  s->print(F(": "));
+  s->print((char *)iFrameData);
+  s->println();
+#else // no packet parser, do a rudimentary print
+  // Second 6 bytes are source callsign
+  for(i=7; i<13; i++) {
+    s->write(*(dataPtr+i)>>1);
+  }
+  // SSID
+  s->write('-');
+  s->print((*(dataPtr+13) >> 1) & 0xF);
+  s->print(F(" -> "));
+  // First 6 bytes are destination callsign
+  for(i=0; i<6; i++) {
+    s->write(*(dataPtr+i)>>1);
+  }
+  // SSID
+  s->write('-');
+  s->print((*(dataPtr+6) >> 1) & 0xF);
+  // Control/PID next two bytes
+  // Skip those, print payload
+  for(i = 15; i<len; i++) {
+    s->write(*(dataPtr+i));
+  }
+#endif
+}
+
+// Determine what we want to do on this ADC tick.
+void AFSK::timer() {
+  static uint8_t tcnt = 0;
+  if(++tcnt == T_BIT && encoder.isSending()) {
+    PORTD |= _BV(6);
+    // Only run the encoder every 8th tick
+    // This is actually DDS RefClk / 1200 = 8, set as T_BIT
+    // A different refclk needs a different value
+    encoder.process();
+    tcnt = 0;
+    PORTD &= ~_BV(6);
+  } else {
+    decoder.process(((int8_t)(ADCH - 128)));
+  }
+}
+
+void AFSK::start(DDS *dds) {
+  afskEnabled = true;
+  encoder.setDDS(dds);
+  decoder.start();
+}

AFSK.h

@@ -0,0 +1,301 @@
+#ifndef _AFSK_H_
+#define _AFSK_H_
+
+#include <Arduino.h>
+#include <SimpleFIFO.h>
+#include <DDS.h>
+
+#define SAMPLERATE 9600
+#define BITRATE    1200
+
+#define SAMPLEPERBIT (SAMPLERATE / BITRATE)
+
+#define RX_FIFO_LEN 16
+
+#define PACKET_BUFFER_SIZE 2
+#define PACKET_STATIC 0
+
+// Enable the packet parser which will tokenize the AX25 frame into easy strings
+#define PACKET_PARSER
+
+// If this is set, all the packet buffers will be pre-allocated at compile time
+// This will use more RAM, but can make it easier to do memory planning.
+// TODO: Make this actually work right and not crash.
+#define PACKET_PREALLOCATE
+
+// This is with all the digis, two addresses, and full payload
+// Dst(7) + Src(7) + Digis(56) + Ctl(1) + PID(1) + Data(0-256) + FCS(2)
+#define PACKET_MAX_LEN 330
+// Minimum is Dst + Src + Ctl + FCS
+#define AX25_PACKET_HEADER_MINLEN 17
+
+// HDLC framing bits
+#define HDLC_FRAME    0x7E
+#define HDLC_RESET    0x7F
+#define HDLC_PREAMBLE 0x00
+#define HDLC_ESCAPE   0x1B
+#define HDLC_TAIL     0x1C
+
+class AFSK {
+private:
+  volatile bool afskEnabled;
+public:
+  bool enabled() { return afskEnabled; };
+  
+  class Packet:public Print {
+  public:
+    Packet():Print() {};
+    virtual size_t write(uint8_t);
+    // Stock virtual method does what we want here.
+    //virtual size_t write(const char *);
+    virtual size_t write(const uint8_t *, size_t);
+    using Print::write;
+    unsigned char ready : 1;
+    unsigned char type : 2;
+    unsigned char freeData : 1;
+    unsigned short len;
+    unsigned short maxLen;
+    //void init(uint8_t *buf, unsigned int dlen, bool freeData); 
+    void init(unsigned short dlen);
+    inline void free() {
+      if(freeData)
+        ::free(dataPtr);
+    }
+    inline const unsigned char getByte(void) {
+      return *readPos++;
+    }
+    inline const unsigned char getByte(uint16_t p) {
+      return *(dataPtr+p);
+    }
+    inline void start() {
+      fcs = 0xffff;
+      // No longer put an explicit frame start here
+      //*dataPos++ = HDLC_ESCAPE;
+      //*dataPos++ = HDLC_FRAME;
+      //len = 2;
+      len = 0;
+    }
+    
+    inline bool append(char c) {
+      if(len < maxLen) {
+        ++len;
+        *dataPos++ = c;
+        return true;
+      }
+      return false;	  
+    }
+    
+    #define UPDATE_FCS(d) e=fcs^(d); f=e^(e<<4); fcs=(fcs>>8)^(f<<8)^(f<<3)^(f>>4)
+    //#define UPDATE_FCS(d) s=(d)^(fcs>>8); t=s^(s>>4); fcs=(fcs<<8)^t^(t<<5)^(t<<12)
+    inline bool appendFCS(unsigned char c) {
+      register unsigned char e, f;
+      if(len < maxLen - 4) { // Leave room for FCS/HDLC
+        append(c);
+        UPDATE_FCS(c);
+        return true;
+      }
+      return false;
+    }
+    
+    size_t appendCallsign(const char *callsign, uint8_t ssid, bool final = false);
+    
+    inline void finish() {
+      append(~(fcs & 0xff));
+      append(~((fcs>>8) & 0xff));
+      // No longer append the frame boundaries themselves
+      //append(HDLC_ESCAPE);
+      //append(HDLC_FRAME);
+      ready = 1;
+    }
+    
+    inline void clear() {
+      fcs = 0xffff;
+      len = 0;
+      readPos = dataPtr;
+      dataPos = dataPtr;
+    }
+    
+    inline bool crcOK() {
+      return (fcs == 0xF0B8);
+    }
+#ifdef PACKET_PARSER
+    bool parsePacket();
+#endif
+    void printPacket(Stream *s);
+  private:
+#ifdef PACKET_PREALLOCATE
+    uint8_t dataPtr[PACKET_MAX_LEN]; // 256 byte I frame + headers max of 78
+#else
+    uint8_t *dataPtr;
+#endif
+#ifdef PACKET_PARSER
+    char srcCallsign[7];
+    uint8_t srcSSID;
+    char dstCallsign[7];
+    uint8_t dstSSID;
+    char digipeater[8][7];
+    uint8_t digipeaterSSID[8];
+    uint8_t *iFrameData;
+    uint8_t length;
+    uint8_t control;
+    uint8_t pid;
+#endif
+    uint8_t *dataPos, *readPos;
+    unsigned short fcs;
+  };
+  
+  
+  class PacketBuffer {
+  public:
+    // Initialize the buffers
+    PacketBuffer();
+    // How many packets are in the buffer?
+    unsigned char count() volatile { return inBuffer; };
+    // And how many of those are ready?
+    unsigned char readyCount() volatile;
+    // Retrieve the next packet
+    Packet *getPacket() volatile;
+    // Create a packet structure as needed
+    // This does not place it in the queue
+    static Packet *makePacket(unsigned short);
+    // Conveniently free packet memory
+    static void freePacket(Packet *);
+    // Place a packet into the buffer
+    bool putPacket(Packet *) volatile;
+  private:
+    volatile unsigned char inBuffer;
+    Packet * volatile packets[PACKET_BUFFER_SIZE];
+    volatile unsigned char nextPacketIn;
+    volatile unsigned char nextPacketOut;
+  };
+  
+  class Encoder {
+  public:
+    Encoder() {
+      randomWait = 1000; // At the very begin, wait at least one second
+      sending = false;
+      done = true;
+      packet = 0x0;
+      currentBytePos = 0;
+      nextByte = 0;
+    }
+    void setDDS(DDS *d) { dds = d; }
+    volatile inline bool isSending() volatile { 
+      return sending; 
+    }
+    volatile inline bool isDone() volatile { 
+      return done; 
+    }
+    volatile inline bool hasPackets() volatile { 
+      return (pBuf.count() > 0); 
+    }
+    inline bool putPacket(Packet *packet) {
+      return pBuf.putPacket(packet);
+    }
+    inline void setRandomWait() {
+      randomWait = 250 + (rand() % 1000) + millis();
+    }
+    bool start();
+    void stop();
+    void process();
+  private:
+    volatile bool sending;
+    byte currentByte;
+    byte currentBit : 1;
+    byte currentTone : 1;
+    byte lastZero : 3;
+    byte bitPosition : 3;
+    byte preamble : 6;
+    //byte bitClock;
+    bool hdlc;
+    byte nextByte;
+    byte maxTx;
+    Packet *packet;
+    PacketBuffer pBuf;
+    unsigned int currentBytePos;
+    volatile unsigned long randomWait;
+    volatile bool done;
+    DDS *dds;
+  };
+  
+  class HDLCDecode {
+  public:
+    bool hdlcParse(bool, SimpleFIFO<uint8_t,RX_FIFO_LEN> *fifo);
+    volatile bool rxstart;
+  private:
+    uint8_t demod_bits;
+    uint8_t bit_idx;
+    uint8_t currchar;
+  };
+  
+  class Decoder {
+  public:
+    Decoder();
+    void start();
+    bool read();
+    void process(int8_t);
+    inline bool dataAvailable() {
+      return (rx_fifo.count() > 0);
+    }
+    inline uint8_t getByte() {
+      return rx_fifo.dequeue();
+    }
+    inline uint8_t packetCount() volatile {
+      return pBuf.count();
+    }
+    inline Packet *getPacket() {
+      return pBuf.getPacket();
+    }
+    inline bool isReceiving() volatile {
+      return hdlc.rxstart;
+    }
+  private:
+    Packet *currentPacket;
+    //SimpleFIFO<int8_t,SAMPLEPERBIT/2+1> delay_fifo;
+    SimpleFIFO<uint8_t,RX_FIFO_LEN> rx_fifo; // This should be drained fairly often
+    int16_t iir_x[2];
+    int16_t iir_y[2];
+    uint8_t sampled_bits;
+    int8_t curr_phase;
+    uint8_t found_bits;
+    PacketBuffer pBuf;
+    HDLCDecode hdlc;
+  };
+  
+public:
+  inline bool read() {
+    return decoder.read();
+  }
+  volatile inline bool txReady() volatile {
+    if(encoder.isDone() && encoder.hasPackets())
+      return true;
+    return false;
+  }
+  volatile inline bool isDone() volatile { return encoder.isDone(); }
+  inline bool txStart() {
+    if(decoder.isReceiving()) {
+      encoder.setRandomWait();
+      return false;
+    } 
+    return encoder.start();
+  }
+  inline bool putTXPacket(Packet *packet) {
+    bool ret = encoder.putPacket(packet);
+    if(!ret) // No room?
+      PacketBuffer::freePacket(packet);
+    return ret;
+  }
+  inline Packet *getRXPacket() {
+    return decoder.getPacket();
+  }
+  inline uint8_t rxPacketCount() volatile {
+    return decoder.packetCount();
+  }
+  //unsigned long lastTx;
+  //unsigned long lastRx;
+  void start(DDS *);
+  void timer();
+  Encoder encoder;
+  Decoder decoder;
+};
+#endif /* _AFSK_H_ */

DDS.cpp

@@ -0,0 +1,175 @@
+#include <Arduino.h>
+#include "DDS.h"
+
+// To start the DDS, we use Timer1, set to the reference clock
+// We use Timer2 for the PWM output, running as fast as feasible
+void DDS::start() {
+  // Use the clkIO clock rate
+  ASSR &= ~(_BV(EXCLK) | _BV(AS2));
+  
+  // First, the timer for the PWM output
+  // Setup the timer to use OC2B (pin 3) in fast PWM mode with a configurable top
+  // Run it without the prescaler
+#ifdef DDS_PWM_PIN_3
+  TCCR2A = (TCCR2A | _BV(COM2B1)) & ~(_BV(COM2B0) | _BV(COM2A1) | _BV(COM2A0)) |
+         _BV(WGM21) | _BV(WGM20);
+  TCCR2B = (TCCR2B & ~(_BV(CS22) | _BV(CS21))) | _BV(CS20) | _BV(WGM22);
+#else
+  // Alternatively, use pin 11
+  // Enable output compare on OC2A, toggle mode
+  TCCR2A = _BV(COM2A1) | _BV(WGM21) | _BV(WGM20);
+  //TCCR2A = (TCCR2A | _BV(COM2A1)) & ~(_BV(COM2A0) | _BV(COM2B1) | _BV(COM2B0)) |
+  //     _BV(WGM21) | _BV(WGM20);
+  TCCR2B = _BV(CS20);
+#endif
+
+  // Set the top limit, which will be our duty cycle accuracy.
+  // Setting Comparator Bits smaller will allow for higher frequency PWM,
+  // with the loss of resolution.
+#ifdef DDS_PWM_PIN_3
+  OCR2A = pow(2,COMPARATOR_BITS)-1;
+  OCR2B = 0;
+#else
+  OCR2A = 0;
+#endif
+  
+#ifdef DDS_USE_ONLY_TIMER2
+  TIMSK2 |= _BV(TOIE2);
+#endif
+
+  // Second, setup Timer1 to trigger the ADC interrupt
+  // This lets us use decoding functions that run at the same reference
+  // clock as the DDS.
+  // We use ICR1 as TOP and prescale by 8
+  TCCR1B = _BV(CS10) | _BV(WGM13) | _BV(WGM12);
+  TCCR1A = 0;
+  ICR1 = ((F_CPU / 1) / refclk) - 1;
+#ifdef DDS_DEBUG_SERIAL
+  Serial.print(F("DDS SysClk: "));
+  Serial.println(F_CPU/8);
+  Serial.print(F("DDS RefClk: "));
+  Serial.println(refclk, DEC);
+  Serial.print(F("DDS ICR1: "));
+  Serial.println(ICR1, DEC);
+#endif
+
+  // Configure the ADC here to automatically run and be triggered off Timer1
+  ADMUX = _BV(REFS0) | _BV(ADLAR) | 0; // Channel 0, shift result left (ADCH used)
+  DDRC &= ~_BV(0);
+  PORTC &= ~_BV(0);
+  DIDR0 |= _BV(0);
+  ADCSRB = _BV(ADTS2) | _BV(ADTS1) | _BV(ADTS0);
+  ADCSRA = _BV(ADEN) | _BV(ADSC) | _BV(ADATE) | _BV(ADIE) | _BV(ADPS2); // | _BV(ADPS0);    
+}
+
+void DDS::stop() {
+  // TODO: Stop the timers.
+#ifndef DDS_USE_ONLY_TIMER2
+  TCCR1B = 0;
+#endif
+  TCCR2B = 0;
+}
+
+// Set our current sine wave frequency in Hz
+ddsAccumulator_t DDS::calcFrequency(unsigned short freq) {
+  // Fo = (M*Fc)/2^N
+  // M = (Fo/Fc)*2^N
+  ddsAccumulator_t newStep;
+  if(refclk == DDS_REFCLK_DEFAULT) {
+    // Try to use precalculated values if possible
+    if(freq == 2200) {
+      newStep = (2200.0 / (DDS_REFCLK_DEFAULT+DDS_REFCLK_OFFSET)) * pow(2,ACCUMULATOR_BITS);
+    } else if (freq == 1200) {
+      newStep = (1200.0 / (DDS_REFCLK_DEFAULT+DDS_REFCLK_OFFSET)) * pow(2,ACCUMULATOR_BITS);      
+    } else if(freq == 2400) {
+      newStep = (2400.0 / (DDS_REFCLK_DEFAULT+DDS_REFCLK_OFFSET)) * pow(2,ACCUMULATOR_BITS);
+    } else if (freq == 1500) {
+      newStep = (1500.0 / (DDS_REFCLK_DEFAULT+DDS_REFCLK_OFFSET)) * pow(2,ACCUMULATOR_BITS);      
+    } else if (freq == 600) {
+      newStep = (600.0 / (DDS_REFCLK_DEFAULT+DDS_REFCLK_OFFSET)) * pow(2,ACCUMULATOR_BITS);      
+    }
+  } else {
+    newStep = pow(2,ACCUMULATOR_BITS)*freq / (refclk+refclkOffset);
+  }
+  return newStep;
+}
+
+// Degrees should be between -360 and +360 (others don't make much sense)
+void DDS::setPhaseDeg(int16_t degrees) {
+  accumulator = degrees * (pow(2,ACCUMULATOR_BITS)/360.0);
+}
+void DDS::changePhaseDeg(int16_t degrees) {
+  accumulator += degrees * (pow(2,ACCUMULATOR_BITS)/360.0);
+}
+
+// TODO: Clean this up a bit..
+void DDS::clockTick() {
+/*  if(running) {
+    accumulator += stepRate;
+    OCR2A = getDutyCycle();
+  }
+  return;*/
+  if(running) {
+    accumulator += stepRate;
+    if(timeLimited && tickDuration == 0) {
+#ifndef DDS_PWM_PIN_3
+      OCR2A = 0;
+#else
+#ifdef DDS_IDLE_HIGH
+      // Set the duty cycle to 50%
+      OCR2B = pow(2,COMPARATOR_BITS)/2;
+#else
+      // Set duty cycle to 0, effectively off
+      OCR2B = 0;
+#endif
+#endif
+      running = false;
+      accumulator = 0;
+    } else {
+#ifdef DDS_PWM_PIN_3
+      OCR2B = getDutyCycle();
+#else
+      OCR2A = getDutyCycle();
+#endif
+    }
+    // Reduce our playback duration by one tick
+    tickDuration--;
+  } else {
+    // Hold it low
+#ifndef DDS_PWM_PIN_3
+    OCR2A = 0;
+#else
+#ifdef DDS_IDLE_HIGH
+    // Set the duty cycle to 50%
+    OCR2B = pow(2,COMPARATOR_BITS)/2;
+#else
+    // Set duty cycle to 0, effectively off
+    OCR2B = 0;
+#endif
+#endif
+  }
+}
+
+uint8_t DDS::getDutyCycle() {
+  #if ACCUMULATOR_BIT_SHIFT >= 24
+    uint16_t phAng;
+  #else
+    uint8_t phAng;
+  #endif
+  if(amplitude == 0) // Shortcut out on no amplitude
+    return 128>>(8-COMPARATOR_BITS);
+  phAng = (accumulator >> ACCUMULATOR_BIT_SHIFT);
+  int8_t position = pgm_read_byte_near(ddsSineTable + phAng); //>>(8-COMPARATOR_BITS);
+  // Apply scaling and return
+  int16_t scaled = position;
+  // output = ((duty * amplitude) / 256) + 128
+  // This keeps amplitudes centered around 50% duty
+  if(amplitude != 255) { // Amplitude is reduced, so do the full math
+    scaled *= amplitude;
+    scaled >>= 8+(8-COMPARATOR_BITS);
+  } else { // Otherwise, only shift for the comparator bits
+    scaled >>= (8-COMPARATOR_BITS);
+  }
+  scaled += 128>>(8-COMPARATOR_BITS);
+  return scaled;
+}

DDS.h

@@ -0,0 +1,228 @@
+#ifndef _DDS_H_
+#define _DDS_H_
+
+#include <avr/pgmspace.h>
+
+// Use pin 3 for PWM? If not defined, use pin 11
+// Quality on pin 3 is higher than on 11, as it can be clocked faster
+// when the COMPARATOR_BITS value is less than 8
+#define DDS_PWM_PIN_3
+
+// Normally, we turn on timer2 and timer1, and have ADC sampling as our clock
+// Define this to only use Timer2, and not start the ADC clock
+// #define DDS_USE_ONLY_TIMER2
+
+// Use a short (16 bit) accumulator. Phase accuracy is reduced, but speed
+// is increased, along with a reduction in memory use.
+#define SHORT_ACCUMULATOR
+
+#ifdef SHORT_ACCUMULATOR
+#define ACCUMULATOR_BITS      16
+typedef uint16_t ddsAccumulator_t;
+#else
+#define ACCUMULATOR_BITS      32
+typedef uint32_t ddsAccumulator_t;
+#endif
+
+// If defined, the timer will idle at 50% duty cycle
+// This leaves it floating in the centre of the PWM/DAC voltage range
+#define DDS_IDLE_HIGH
+
+// Select how fast the PWM is, at the expense of level accuracy.
+// A faster PWM rate will make for easier filtering of the output wave,
+// while a slower one will allow for more accurate voltage level outputs,
+// but will increase the filtering requirements on the output.
+// 8 = 62.5kHz PWM
+// 7 = 125kHz PWM
+// 6 = 250kHz PWM
+#ifdef DDS_PWM_PIN_3
+#define COMPARATOR_BITS       6
+#else // When using pin 11, we always want 8 bits
+#define COMPARATOR_BITS       8
+#endif
+
+// This is how often we'll perform a phase advance, as well as ADC sampling
+// rate. The higher this value, the smoother the output wave will be, at the
+// expense of CPU time. It maxes out around 62000 (TBD)
+// May be overridden in the sketch to improve performance
+#ifndef DDS_REFCLK_DEFAULT
+#define DDS_REFCLK_DEFAULT     9600
+#endif
+// As each Arduino crystal is a little different, this can be fine tuned to
+// provide more accurate frequencies. Adjustments in the range of hundreds
+// is a good start.
+#ifndef DDS_REFCLK_OFFSET
+#define DDS_REFCLK_OFFSET     0
+#endif
+
+#ifdef DDS_USE_ONLY_TIMER2
+// TODO: Figure out where this clock value is generated from
+#define DDS_REFCLK_DEFAULT     (62500/4)
+#endif
+
+// Output some of the calculations and information about the DDS over serial
+//#define DDS_DEBUG_SERIAL
+
+// When defined, use the 1024 element sine lookup table. This improves phase
+// accuracy, at the cost of more flash and CPU requirements.
+// #define DDS_TABLE_LARGE
+
+#ifdef DDS_TABLE_LARGE
+// How many bits to keep from the accumulator to look up in this table
+#define ACCUMULATOR_BIT_SHIFT (ACCUMULATOR_BITS-10)
+static const int8_t ddsSineTable[1024] PROGMEM = {
+  0, 0, 1, 2, 3, 3, 4, 5, 6, 7, 7, 8, 9, 10, 10, 11, 12, 13, 13, 14, 15, 16, 17, 17, 18, 19, 20, 20, 21, 22, 23, 24, 
+  24, 25, 26, 27, 27, 28, 29, 30, 30, 31, 32, 33, 33, 34, 35, 36, 36, 37, 38, 39, 39, 40, 41, 42, 42, 43, 44, 44, 45, 46, 47, 47, 
+  48, 49, 50, 50, 51, 52, 52, 53, 54, 55, 55, 56, 57, 57, 58, 59, 59, 60, 61, 61, 62, 63, 63, 64, 65, 65, 66, 67, 67, 68, 69, 69, 
+  70, 71, 71, 72, 73, 73, 74, 75, 75, 76, 76, 77, 78, 78, 79, 79, 80, 81, 81, 82, 82, 83, 84, 84, 85, 85, 86, 87, 87, 88, 88, 89, 
+  89, 90, 90, 91, 91, 92, 93, 93, 94, 94, 95, 95, 96, 96, 97, 97, 98, 98, 99, 99, 100, 100, 101, 101, 102, 102, 102, 103, 103, 104, 104, 105, 
+  105, 106, 106, 106, 107, 107, 108, 108, 108, 109, 109, 110, 110, 110, 111, 111, 112, 112, 112, 113, 113, 113, 114, 114, 114, 115, 115, 115, 116, 116, 116, 117, 
+  117, 117, 117, 118, 118, 118, 119, 119, 119, 119, 120, 120, 120, 120, 121, 121, 121, 121, 121, 122, 122, 122, 122, 123, 123, 123, 123, 123, 123, 124, 124, 124, 
+  124, 124, 124, 124, 125, 125, 125, 125, 125, 125, 125, 125, 126, 126, 126, 126, 126, 126, 126, 126, 126, 126, 126, 126, 126, 126, 126, 126, 126, 126, 126, 126, 
+  127, 126, 126, 126, 126, 126, 126, 126, 126, 126, 126, 126, 126, 126, 126, 126, 126, 126, 126, 126, 126, 125, 125, 125, 125, 125, 125, 125, 125, 124, 124, 124, 
+  124, 124, 124, 124, 123, 123, 123, 123, 123, 123, 122, 122, 122, 122, 121, 121, 121, 121, 121, 120, 120, 120, 120, 119, 119, 119, 119, 118, 118, 118, 117, 117, 
+  117, 117, 116, 116, 116, 115, 115, 115, 114, 114, 114, 113, 113, 113, 112, 112, 112, 111, 111, 110, 110, 110, 109, 109, 108, 108, 108, 107, 107, 106, 106, 106, 
+  105, 105, 104, 104, 103, 103, 102, 102, 102, 101, 101, 100, 100, 99, 99, 98, 98, 97, 97, 96, 96, 95, 95, 94, 94, 93, 93, 92, 91, 91, 90, 90, 
+  89, 89, 88, 88, 87, 87, 86, 85, 85, 84, 84, 83, 82, 82, 81, 81, 80, 79, 79, 78, 78, 77, 76, 76, 75, 75, 74, 73, 73, 72, 71, 71, 
+  70, 69, 69, 68, 67, 67, 66, 65, 65, 64, 63, 63, 62, 61, 61, 60, 59, 59, 58, 57, 57, 56, 55, 55, 54, 53, 52, 52, 51, 50, 50, 49, 
+  48, 47, 47, 46, 45, 44, 44, 43, 42, 42, 41, 40, 39, 39, 38, 37, 36, 36, 35, 34, 33, 33, 32, 31, 30, 30, 29, 28, 27, 27, 26, 25, 
+  24, 24, 23, 22, 21, 20, 20, 19, 18, 17, 17, 16, 15, 14, 13, 13, 12, 11, 10, 10, 9, 8, 7, 7, 6, 5, 4, 3, 3, 2, 1, 0, 
+  0, 0, -1, -2, -3, -3, -4, -5, -6, -7, -7, -8, -9, -10, -10, -11, -12, -13, -13, -14, -15, -16, -17, -17, -18, -19, -20, -20, -21, -22, -23, -24, 
+  -24, -25, -26, -27, -27, -28, -29, -30, -30, -31, -32, -33, -33, -34, -35, -36, -36, -37, -38, -39, -39, -40, -41, -42, -42, -43, -44, -44, -45, -46, -47, -47, 
+  -48, -49, -50, -50, -51, -52, -52, -53, -54, -55, -55, -56, -57, -57, -58, -59, -59, -60, -61, -61, -62, -63, -63, -64, -65, -65, -66, -67, -67, -68, -69, -69, 
+  -70, -71, -71, -72, -73, -73, -74, -75, -75, -76, -76, -77, -78, -78, -79, -79, -80, -81, -81, -82, -82, -83, -84, -84, -85, -85, -86, -87, -87, -88, -88, -89, 
+  -89, -90, -90, -91, -91, -92, -93, -93, -94, -94, -95, -95, -96, -96, -97, -97, -98, -98, -99, -99, -100, -100, -101, -101, -102, -102, -102, -103, -103, -104, -104, -105, 
+  -105, -106, -106, -106, -107, -107, -108, -108, -108, -109, -109, -110, -110, -110, -111, -111, -112, -112, -112, -113, -113, -113, -114, -114, -114, -115, -115, -115, -116, -116, -116, -117, 
+  -117, -117, -117, -118, -118, -118, -119, -119, -119, -119, -120, -120, -120, -120, -121, -121, -121, -121, -121, -122, -122, -122, -122, -123, -123, -123, -123, -123, -123, -124, -124, -124, 
+  -124, -124, -124, -124, -125, -125, -125, -125, -125, -125, -125, -125, -126, -126, -126, -126, -126, -126, -126, -126, -126, -126, -126, -126, -126, -126, -126, -126, -126, -126, -126, -126, 
+  -127, -126, -126, -126, -126, -126, -126, -126, -126, -126, -126, -126, -126, -126, -126, -126, -126, -126, -126, -126, -126, -125, -125, -125, -125, -125, -125, -125, -125, -124, -124, -124, 
+  -124, -124, -124, -124, -123, -123, -123, -123, -123, -123, -122, -122, -122, -122, -121, -121, -121, -121, -121, -120, -120, -120, -120, -119, -119, -119, -119, -118, -118, -118, -117, -117, 
+  -117, -117, -116, -116, -116, -115, -115, -115, -114, -114, -114, -113, -113, -113, -112, -112, -112, -111, -111, -110, -110, -110, -109, -109, -108, -108, -108, -107, -107, -106, -106, -106, 
+  -105, -105, -104, -104, -103, -103, -102, -102, -102, -101, -101, -100, -100, -99, -99, -98, -98, -97, -97, -96, -96, -95, -95, -94, -94, -93, -93, -92, -91, -91, -90, -90, 
+  -89, -89, -88, -88, -87, -87, -86, -85, -85, -84, -84, -83, -82, -82, -81, -81, -80, -79, -79, -78, -78, -77, -76, -76, -75, -75, -74, -73, -73, -72, -71, -71, 
+  -70, -69, -69, -68, -67, -67, -66, -65, -65, -64, -63, -63, -62, -61, -61, -60, -59, -59, -58, -57, -57, -56, -55, -55, -54, -53, -52, -52, -51, -50, -50, -49, 
+  -48, -47, -47, -46, -45, -44, -44, -43, -42, -42, -41, -40, -39, -39, -38, -37, -36, -36, -35, -34, -33, -33, -32, -31, -30, -30, -29, -28, -27, -27, -26, -25, 
+  -24, -24, -23, -22, -21, -20, -20, -19, -18, -17, -17, -16, -15, -14, -13, -13, -12, -11, -10, -10, -9, -8, -7, -7, -6, -5, -4, -3, -3, -2, -1, 0
+};
+#else
+#define ACCUMULATOR_BIT_SHIFT (ACCUMULATOR_BITS-8)
+static const int8_t ddsSineTable[256] PROGMEM = {
+  0, 3, 6, 9, 12, 16, 19, 22, 25, 28, 31, 34, 37, 40, 43, 46, 49,
+  51, 54, 57, 60, 63, 65, 68, 71, 73, 76, 78, 81, 83, 85, 88, 90,
+  92, 94, 96, 98, 100, 102, 104, 106, 107, 109, 111, 112, 113, 115,
+  116, 117, 118, 120, 121, 122, 122, 123, 124, 125, 125, 126, 126,
+  126, 127, 127, 127, 127, 127, 127, 127, 126, 126, 126, 125, 125,
+  124, 123, 122, 122, 121, 120, 118, 117, 116, 115, 113, 112, 111,
+  109, 107, 106, 104, 102, 100, 98, 96, 94, 92, 90, 88, 85, 83, 81,
+  78, 76, 73, 71, 68, 65, 63, 60, 57, 54, 51, 49, 46, 43, 40, 37,
+  34, 31, 28, 25, 22, 19, 16, 12, 9, 6, 3, 0, -3, -6, -9, -12, -16,
+  -19, -22, -25, -28, -31, -34, -37, -40, -43, -46, -49, -51, -54,
+  -57, -60, -63, -65, -68, -71, -73, -76, -78, -81, -83, -85, -88,
+  -90, -92, -94, -96, -98, -100, -102, -104, -106, -107, -109, -111,
+  -112, -113, -115, -116, -117, -118, -120, -121, -122, -122, -123,
+  -124, -125, -125, -126, -126, -126, -127, -127, -127, -127, -127,
+  -127, -127, -126, -126, -126, -125, -125, -124, -123, -122, -122,
+  -121, -120, -118, -117, -116, -115, -113, -112, -111, -109, -107,
+  -106, -104, -102, -100, -98, -96, -94, -92, -90, -88, -85, -83,
+  -81, -78, -76, -73, -71, -68, -65, -63, -60, -57, -54, -51, -49,
+  -46, -43, -40, -37, -34, -31, -28, -25, -22, -19, -16, -12, -9, -6, -3
+  };
+#endif /* DDS_TABLE_LARGE */
+
+class DDS {
+public:
+  DDS(): refclk(DDS_REFCLK_DEFAULT), refclkOffset(DDS_REFCLK_OFFSET),
+    accumulator(0), running(false),
+    timeLimited(false), tickDuration(0), amplitude(255)
+    {};
+
+  // Start all of the timers needed
+  void start();
+  // Is the DDS presently producing a tone?
+  const bool isRunning() { return running; };
+  // Stop the DDS timers
+  void stop();
+  
+  // Start and stop the PWM output
+  void on() {
+    timeLimited = false;
+    running = true;
+  }
+  // Provide a duration in ms for the tone
+  void on(unsigned short duration) {
+    // Duration in ticks from milliseconds is:
+    // t = (1/refclk)
+    tickDuration = (unsigned long)((unsigned long)duration * (unsigned long)refclk) / 1000;
+    timeLimited = true;
+    running = true;
+  }
+  void off() {
+    running = false;
+  }
+  
+  // Generate a tone for a specific amount of time
+  void play(unsigned short freq, unsigned short duration) {
+    setFrequency(freq);
+    on(duration);
+  }
+  // Blocking version
+  void playWait(unsigned short freq, unsigned short duration) {
+    play(freq, duration);
+    delay(duration);
+  }
+  
+  // Use these to get some calculated values for specific frequencies
+  // or to get the current frequency stepping rate.
+  ddsAccumulator_t calcFrequency(unsigned short freq);
+  ddsAccumulator_t getPhaseAdvance() { return stepRate; };
+  
+  // Our maximum clock isn't very high, so our highest
+  // frequency supported will fit in a short.
+  void setFrequency(unsigned short freq) { stepRate = calcFrequency(freq); };
+  void setPrecalcFrequency(ddsAccumulator_t freq) { stepRate = freq; };
+  
+  // Handle phase shifts
+  void setPhaseDeg(int16_t degrees);
+  void changePhaseDeg(int16_t degrees);
+  
+  // Adjustable reference clock. This shoud be done before the timers are
+  // started, or they will need to be restarted. Frequencies will need to
+  // be set again to use the new clock.
+  void setReferenceClock(unsigned long ref) {
+    refclk = ref;
+  }
+  unsigned long getReferenceClock() {
+    return refclk;
+  }
+
+  void setReferenceOffset(int16_t offset) {
+    refclkOffset = offset;
+  }
+  int16_t getReferenceOffset() {
+    return refclkOffset;
+  }
+  
+  uint8_t getDutyCycle();
+
+  // Set a scaling factor. To keep things quick, this is a power of 2 value.
+  // Set it with 0 for lowest (which will be off), 8 is highest.
+  void setAmplitude(unsigned char amp) {
+    amplitude = amp;
+  }
+  
+  // This is the function called by the ADC_vect ISR to produce the tones
+  void clockTick();
+  
+private:
+  volatile bool running;
+  volatile unsigned long tickDuration;
+  volatile bool timeLimited;
+  volatile unsigned char amplitude;
+  volatile ddsAccumulator_t accumulator;
+  volatile ddsAccumulator_t stepRate;
+  ddsAccumulator_t refclk;
+  int16_t refclkOffset;
+  static DDS *sDDS;
+};
+
+#endif /* _DDS_H_ */

HamShield.cpp

@@ -6,27 +6,100 @@
 #include "Arduino.h"
 #include "HamShield.h"
 #include <avr/wdt.h>
+#include <avr/pgmspace.h>
 // #include <PCM.h>
 
 /* don't change this regulatory value, use dangerMode() and safeMode() instead */
 
 bool restrictions = true; 
+HamShield *HamShield::sHamShield = NULL;
 
 /* channel lookup tables */
 
-uint32_t FRS[] = {0,462562,462587,462612,462637,462662,462687,462712,467562,467587,467612,467637,467662,467687,467712};
+const uint32_t FRS[] PROGMEM = {0,462562,462587,462612,462637,462662,462687,462712,467562,467587,467612,467637,467662,467687,467712};
 
-uint32_t GMRS[] = {0,462550,462575,462600,462625,462650,462675,462700,462725};
+const uint32_t GMRS[] PROGMEM = {0,462550,462575,462600,462625,462650,462675,462700,462725};
 
-uint32_t MURS[] = {0,151820,151880,151940,154570,154600};
+const uint32_t MURS[] PROGMEM = {0,151820,151880,151940,154570,154600};
 
-uint32_t WX[] = {0,162550,162400,162475,162425,162450,162500,162525};
+const uint32_t WX[] PROGMEM = {0,162550,162400,162475,162425,162450,162500,162525};
 
 /* morse code lookup table */
-
-const char *ascii = "ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.,?'!/()&:;=+-_\"$@",
-  *itu[] = { ".-","-...","-.-.","-..",".","..-.","--.","....","..",".---","-.-",".-..","--","-.","---",".--.","--.-",".-.","...","-","..-","...-",".--","-..-","-.--","--..","-----",".----","..---","...--","....-",".....","-....","--...","---..","----.",".-.-.-","--..--","..--..",".----.","-.-.--","-..-.","-.--.","-.--.-",".-...","---...","-.-.-.","-...-",".-.-.","-....-","..--.-",".-..-.","...-..-",".--.-."
-  };
+// This is the Morse table in reverse binary format.
+// It will occupy 108 bytes of memory (or program memory if defined)
+#define MORSE_TABLE_LENGTH 54
+#define MORSE_TABLE_PROGMEM
+#ifndef MORSE_TABLE_PROGMEM
+const struct asciiMorse {
+    char ascii;
+    uint8_t itu;
+} asciiMorse[MORSE_TABLE_LENGTH] = {
+    { 'E', 0b00000010 }, // .
+    { 'T', 0b00000011 }, // -
+    { 'I', 0b00000100 }, // ..
+    { 'N', 0b00000101 }, // -.
+    { 'A', 0b00000110 }, // .-
+    { 'M', 0b00000111 }, // --
+    { 'S', 0b00001000 }, // ...
+    { 'D', 0b00001001 }, // -..
+    { 'R', 0b00001010 }, // .-.
+    { 'G', 0b00001011 }, // --.
+    { 'U', 0b00001100 }, // ..-
+    { 'K', 0b00001101 }, // -.-
+    { 'W', 0b00001110 }, // .--
+    { 'O', 0b00001111 }, // ---
+    { 'H', 0b00010000 }, // ....
+    { 'B', 0b00010001 }, // -...
+    { 'L', 0b00010010 }, // .-..
+    { 'Z', 0b00010011 }, // --..
+    { 'F', 0b00010100 }, // ..-.
+    { 'C', 0b00010101 }, // -.-.
+    { 'P', 0b00010110 }, // .--.
+    { 'V', 0b00011000 }, // ...-
+    { 'X', 0b00011001 }, // -..-
+    { 'Q', 0b00011011 }, // --.-
+    { 'Y', 0b00011101 }, // -.--
+    { 'J', 0b00011110 }, // .---
+    { '5', 0b00100000 }, // .....
+    { '6', 0b00100001 }, // -....
+    { '&', 0b00100010 }, // .-...
+    { '7', 0b00100011 }, // --...
+    { '8', 0b00100111 }, // ---..
+    { '/', 0b00101001 }, // -..-.
+    { '+', 0b00101010 }, // .-.-.
+    { '(', 0b00101101 }, // -.--.
+    { '9', 0b00101111 }, // ----.
+    { '4', 0b00110000 }, // ....-
+    { '=', 0b00110001 }, // -...-
+    { '3', 0b00111000 }, // ...--
+    { '2', 0b00111100 }, // ..---
+    { '1', 0b00111110 }, // .----
+    { '0', 0b00111111 }, // -----
+    { ':', 0b01000111 }, // ---...
+    { '?', 0b01001100 }, // ..--..
+    { '"', 0b01010010 }, // .-..-.
+    { ';', 0b01010101 }, // -.-.-.
+    { '@', 0b01010110 }, // .--.-.
+    { '\047', 0b01011110 }, // (') .----.
+    { '-', 0b01100001 }, // -....-
+    { '.', 0b01101010 }, // .-.-.-
+    { '_', 0b01101100 }, // ..--.-
+    { ')', 0b01101101 }, // -.--.-
+    { ',', 0b01110011 }, // --..--
+    { '!', 0b01110101 }, // -.-.--
+    { '$', 0b11001000 } // ...-..-
+};
+#else
+// This is a program memory variant, using 16 bit words for storage instead.
+const uint16_t asciiMorseProgmem[] PROGMEM = {
+  0x4502, 0x5403, 0x4904, 0x4E05, 0x4106, 0x4D07, 0x5308, 0x4409, 0x520A,
+  0x470B, 0x550C, 0x4B0D, 0x570E, 0x4F0F, 0x4810, 0x4211, 0x4C12, 0x5A13,
+  0x4614, 0x4315, 0x5016, 0x5618, 0x5819, 0x511B, 0x591D, 0x4A1E, 0x3520,
+  0x3621, 0x2622, 0x3723, 0x3827, 0x2F29, 0x2B2A, 0x282D, 0x392F, 0x3430,
+  0x3D31, 0x3338, 0x323C, 0x313E, 0x303F, 0x3A47, 0x3F4C, 0x2252, 0x3B55,
+  0x4056, 0x275E, 0x2D61, 0x2E6A, 0x5F6C, 0x296D, 0x2C73, 0x2175, 0x24C8
+};
+#endif // MORSE_TABLE_PROGMEM
 
 /* 2200 Hz */
 
@@ -47,6 +120,7 @@ volatile long bouncer = 0;
  */
 HamShield::HamShield() {
     devAddr = A1846S_DEV_ADDR_SENLOW;
+    sHamShield = this;
 }
 
 /** Specific address constructor.
@@ -62,11 +136,7 @@ HamShield::HamShield(uint8_t address) {
 /** Power on and prepare for general usage.
  * 
  */
-void HamShield::initialize() {
-   // set up PWM output for RF power control - commenting out to get rid of terrible buzzing noise
-   // pwr_control_pin = 9;  
-  
-  
+void HamShield::initialize() {  
    // Note: these initial settings are for UHF 12.5kHz channel
    // see the A1846S register table and initial settings for more info
    
@@ -78,135 +148,140 @@ void HamShield::initialize() {
     //set up clock to ues 12-14MHz
     setClkMode(1);
     
+	// set up GPIO voltage (want 3.3V)
+	tx_data = 0x03AC; // default is 0x32C
+    I2Cdev::writeWord(devAddr, 0x09, tx_data);
+
+	tx_data = 0x47E0; //0x43A0; // 0x7C20; //
+    I2Cdev::writeWord(devAddr, 0x0A, tx_data); // pga gain [10:6]
+	tx_data = 0xA100;
+    I2Cdev::writeWord(devAddr, 0x13, tx_data);
+	tx_data = 0x5001;
+    I2Cdev::writeWord(devAddr, 0x1F, tx_data); // GPIO7->VOX, GPIO0->CTC/DCS
 	
-    tx_data = 0x0031;
-    I2Cdev::writeWord(devAddr, 0x31, tx_data); // included as per AU supplied register table
-
-	tx_data = 0x44A5;
-    I2Cdev::writeWord(devAddr, 0x33, tx_data); // agc number - included as per AU supplied register table
 	
-	tx_data = 0x2B87;
-    I2Cdev::writeWord(devAddr, 0x34, tx_data); // Rx digital gain - included as per AU supplied register table
-
-	tx_data = 0x470F;
-    I2Cdev::writeWord(devAddr, 0x41, tx_data); // digital gain for Tx - included as per AU supplied register table
-
-	tx_data = 0x0DFF;
-    I2Cdev::writeWord(devAddr, A1846S_RX_VOLUME_REG, tx_data); 
-
-	tx_data = 0x7FFF;
-    I2Cdev::writeWord(devAddr, 0x47, tx_data);// soft mute
+	tx_data = 0x0031;
+    I2Cdev::writeWord(devAddr, 0x31, tx_data);
+	tx_data = 0x0AF2; //
+    I2Cdev::writeWord(devAddr, 0x33, tx_data); // agc number
+	
+	// AGC table
+	tx_data = 0x0001;
+    I2Cdev::writeWord(devAddr, 0x7F, tx_data);
+	tx_data = 0x000C;
+    I2Cdev::writeWord(devAddr, 0x05, tx_data);
+	tx_data = 0x020C;
+    I2Cdev::writeWord(devAddr, 0x06, tx_data);
+	tx_data = 0x030C;
+    I2Cdev::writeWord(devAddr, 0x07, tx_data);
+	tx_data = 0x0324;
+    I2Cdev::writeWord(devAddr, 0x08, tx_data);
+	tx_data = 0x1344;
+    I2Cdev::writeWord(devAddr, 0x09, tx_data);
+	tx_data = 0x3F44;
+    I2Cdev::writeWord(devAddr, 0x0A, tx_data);
+	tx_data = 0x3F44;
+    I2Cdev::writeWord(devAddr, 0x0B, tx_data);
+	tx_data = 0x3F44;
+    I2Cdev::writeWord(devAddr, 0x0C, tx_data);
+	tx_data = 0x3F44;
+    I2Cdev::writeWord(devAddr, 0x0D, tx_data);
+	tx_data = 0x3F44;
+    I2Cdev::writeWord(devAddr, 0x0E, tx_data);
+	tx_data = 0x3F44;
+    I2Cdev::writeWord(devAddr, 0x0F, tx_data);
+	tx_data = 0xE0ED;
+    I2Cdev::writeWord(devAddr, 0x12, tx_data);
+	tx_data = 0xF2FE;
+    I2Cdev::writeWord(devAddr, 0x13, tx_data);
+	tx_data = 0x0A16;
+    I2Cdev::writeWord(devAddr, 0x14, tx_data);
+	tx_data = 0x2424;
+    I2Cdev::writeWord(devAddr, 0x15, tx_data);
+	tx_data = 0x2424;
+    I2Cdev::writeWord(devAddr, 0x16, tx_data);
+	tx_data = 0x2424;
+    I2Cdev::writeWord(devAddr, 0x17, tx_data);
+	tx_data = 0x0000;
+    I2Cdev::writeWord(devAddr, 0x7F, tx_data);
+	// end AGC table
 
+	tx_data = 0x067F; //0x0601; //0x470F;
+    I2Cdev::writeWord(devAddr, 0x41, tx_data); // voice gain tx [6:0]
+	tx_data = 0x02FF; // using 0x04FF to avoid tx voice delay
+    I2Cdev::writeWord(devAddr, 0x44, tx_data); // tx gain [11:8]
+	tx_data = 0x7F2F;
+    I2Cdev::writeWord(devAddr, 0x47, tx_data);
 	tx_data = 0x2C62;
-    I2Cdev::writeWord(devAddr, 0x4F, tx_data);// included as per AU supplied register table
-	
+    I2Cdev::writeWord(devAddr, 0x4F, tx_data);
 	tx_data = 0x0094;
-    I2Cdev::writeWord(devAddr, 0x53, tx_data);// included as per AU supplied register table	
-	
+    I2Cdev::writeWord(devAddr, 0x53, tx_data); // compressor update time (bits 6:0, 5.12ms per unit)
+	tx_data = 0x2A18;
+    I2Cdev::writeWord(devAddr, 0x54, tx_data);
 	tx_data = 0x0081;
-    I2Cdev::writeWord(devAddr, 0x55, tx_data);// included as per AU supplied register table		
-	
+    I2Cdev::writeWord(devAddr, 0x55, tx_data);
 	tx_data = 0x0B22;
-    I2Cdev::writeWord(devAddr, 0x56, tx_data);// sq detection time
-	
+    I2Cdev::writeWord(devAddr, 0x56, tx_data); // sq detect time
 	tx_data = 0x1C00;
-    I2Cdev::writeWord(devAddr, 0x57, tx_data);// bypass rssi lpfilter
+    I2Cdev::writeWord(devAddr, 0x57, tx_data);
+	tx_data = 0x800D;
+    I2Cdev::writeWord(devAddr, 0x58, tx_data); 
+	tx_data = 0x0EDD;
+    I2Cdev::writeWord(devAddr, 0x5A, tx_data); // sq and noise detect times
+	tx_data = 0x3FFF;
+    I2Cdev::writeWord(devAddr, 0x63, tx_data); // pre-emphasis bypass
 	
-	tx_data = 0x0EDB;
-    I2Cdev::writeWord(devAddr, 0x5A, tx_data);// SQ detection time
-
-	tx_data = 0x101E;
-    I2Cdev::writeWord(devAddr, 0x60, tx_data);// SQ noise threshold
-	
-	tx_data = 0x16AD;
-    I2Cdev::writeWord(devAddr, 0x63, tx_data);// pre-emphasis bypass threshold
-
 	// calibration
 	tx_data = 0x00A4;
     I2Cdev::writeWord(devAddr, 0x30, tx_data);
-	delay(50);
+	delay(100);
 	tx_data = 0x00A6;
     I2Cdev::writeWord(devAddr, 0x30, tx_data);
 	delay(100);
 	tx_data = 0x0006;
     I2Cdev::writeWord(devAddr, 0x30, tx_data);
-	delay(10);
-	
-	// continue default setup in 12.5kHz mode
+	delay(100);
+
+
+	// setup for 12.5kHz channel width
+	tx_data = 0x3D37;
+    I2Cdev::writeWord(devAddr, 0x11, tx_data);	
+	tx_data = 0x0100;
+    I2Cdev::writeWord(devAddr, 0x12, tx_data);	
 	tx_data = 0x1100;
-    I2Cdev::writeWord(devAddr, 0x15, tx_data); // tuning bit
-	
+    I2Cdev::writeWord(devAddr, 0x15, tx_data);
 	tx_data = 0x4495;
-    I2Cdev::writeWord(devAddr, 0x32, tx_data); // agc target power	
-	
+    I2Cdev::writeWord(devAddr, 0x32, tx_data); // agc target power [11:6]
+	tx_data = 0x2B8E;
+    I2Cdev::writeWord(devAddr, 0x34, tx_data);
 	tx_data = 0x40C3;
     I2Cdev::writeWord(devAddr, 0x3A, tx_data); // modu_det_sel sq setting
-	
-	tx_data = 0x0F1E;
-    I2Cdev::writeWord(devAddr, 0x3C, tx_data); // pk_det_thr sq setting
-	
+	tx_data = 0x0407;
+    I2Cdev::writeWord(devAddr, 0x3C, tx_data); // pk_det_th sq setting [8:7]
 	tx_data = 0x28D0;
-    I2Cdev::writeWord(devAddr, 0x3F, tx_data); // pk_det_thr sq setting
-
-	tx_data = 0x20BE;
-    I2Cdev::writeWord(devAddr, 0x48, tx_data); // pk_det_thr sq setting
-
-	tx_data = 0x0A50;
-    I2Cdev::writeWord(devAddr, 0x59, tx_data); // Tx FM Deviation
-	
-	tx_data = 0x1425; //0x0A10;
-    I2Cdev::writeWord(devAddr, 0x62, tx_data); // Modu_det_thresh (sq setting)
-	
+    I2Cdev::writeWord(devAddr, 0x3F, tx_data); // rssi3_th sq setting
+	tx_data = 0x203E;
+    I2Cdev::writeWord(devAddr, 0x48, tx_data);
+	tx_data = 0x1BB7;
+    I2Cdev::writeWord(devAddr, 0x60, tx_data);
+	tx_data = 0x0A10; // use 0x1425 if there's an LNA
+    I2Cdev::writeWord(devAddr, 0x62, tx_data);
 	tx_data = 0x2494;
-    I2Cdev::writeWord(devAddr, 0x65, tx_data); // setting th_sif for SQ rssi detect
-
-	tx_data = 0x2494;
-    I2Cdev::writeWord(devAddr, 0x66, tx_data); // setting th_sif for SQ rssi detect
-	
-	// AGC gain table settings
-	// the rest of these settings are to upper register addresses
-	// set 0x7F to 1 to write to them
-	tx_data = 0x0001;
-    I2Cdev::writeWord(devAddr, 0x7F, tx_data);
-	
-	tx_data = 0x0014;
-    I2Cdev::writeWord(devAddr, 0x06, tx_data);
-	tx_data = 0x020C;
-    I2Cdev::writeWord(devAddr, 0x07, tx_data);
-	tx_data = 0x0214;
-    I2Cdev::writeWord(devAddr, 0x08, tx_data);
-	tx_data = 0x030C;
-    I2Cdev::writeWord(devAddr, 0x09, tx_data);
-	tx_data = 0x0314;
-    I2Cdev::writeWord(devAddr, 0x0A, tx_data);
-	tx_data = 0x0324;
-    I2Cdev::writeWord(devAddr, 0x0B, tx_data);
-	tx_data = 0x0344;
-    I2Cdev::writeWord(devAddr, 0x0C, tx_data);
-	tx_data = 0x1344;
-    I2Cdev::writeWord(devAddr, 0x0D, tx_data);
-	tx_data = 0x1B44;
-    I2Cdev::writeWord(devAddr, 0x0E, tx_data);
-	tx_data = 0x3F44;
-    I2Cdev::writeWord(devAddr, 0x0F, tx_data);
-	tx_data = 0xE0EB;
-    I2Cdev::writeWord(devAddr, 0x12, tx_data);
-	
-	// done writing to upper page addresses, so set 0x7F back
-	tx_data = 0x0000;
-    I2Cdev::writeWord(devAddr, 0x7F, tx_data);	
+    I2Cdev::writeWord(devAddr, 0x65, tx_data);
+	tx_data = 0xEB2E;
+    I2Cdev::writeWord(devAddr, 0x66, tx_data);
 	
     delay(100);
 
     // setup default values
-    setFrequency(446000);
+    frequency(446000);
     //setVolume1(0xF);
     //setVolume2(0xF);
     setModeReceive();
     setTxSourceMic();
+	setRfPower(0);
     setSQLoThresh(80);
     setSQOn();
-
 }
 
 /** Verify the I2C connection.
@@ -258,87 +333,60 @@ void HamShield::setFrequency(uint32_t freq_khz) {
     radio_frequency = freq_khz;
     uint32_t freq_raw = freq_khz << 4; // shift by 4 to multiply by 16 (was shift by 3 in old 1846 chip)
 
+	// turn off tx/rx
+	I2Cdev::writeBitsW(devAddr, A1846S_CTL_REG, 6, 2, 0);
+	
+	// if we're using a 12MHz crystal and the frequency is
+	// 136.5M,409.5M and 455M, then we have to do special stuff
+    if (radio_frequency == 136500 ||
+        radio_frequency == 490500 ||
+		radio_frequency == 455000) {
+		
+		// set up AU1846 for funky freq
+		I2Cdev::writeWord(devAddr, 0x05, 0x86D3);
+
+	} else {
+		// set up AU1846 for normal freq
+		I2Cdev::writeWord(devAddr, 0x05, 0x8763);
+	}
+	
     // send top 16 bits to A1846S_FREQ_HI_REG	
     uint16_t freq_half = (uint16_t) (0x3FFF & (freq_raw >> 16));
     I2Cdev::writeWord(devAddr, A1846S_FREQ_HI_REG, freq_half);
     //  send bottom 16 bits to A1846S_FREQ_LO_REG
     freq_half = (uint16_t) (freq_raw & 0xFFFF);
     I2Cdev::writeWord(devAddr, A1846S_FREQ_LO_REG, freq_half);
+	
+   	if (rx_active) {
+		setRX(true);
+	} else if (tx_active) {
+		setTX(true);
+	}
 }
 
 uint32_t HamShield::getFrequency() {
   return radio_frequency;
 }
 
-void HamShield::setUHF() {
-  setGpioHi(2); // turn off VHF
-  setGpioLow(3); // turn on UHF
+void HamShield::setTxBand2m() {
+  setGpioLow(4); // V1
+  setGpioHi(5); // V2
 }
 
-void HamShield::setVHF() {
-  setGpioHi(3); // turn off UHF
-  setGpioLow(2); // turn on VHF
+void HamShield::setTxBand1_2m() {
+  setGpioHi(4); // V1
+  setGpioLow(5); // V2
 }
 
-void HamShield::setNoFilters() {
-  setGpioHi(3); // turn off UHF
-  setGpioHi(2); // turn off VHF
-}
+void HamShield::setTxBand70cm() {
+  //setGpioHi(4); // V1
+  //setGpioHi(5); // V2
+  
+  uint16_t mode_len = 4;
+  uint16_t bit = 11;
 
-/*
-// band
-// 00 - 400-520MHz 
-// 10 - 200-260MHz
-// 11 - 134-174MHz
-// TODO: add write to 0x32 based on band selection
-void HamShield::setBand(uint16_t band){
-    if (band == 0) {
-      setUHF();
-    } else if (band == 2) {
-      // not quite in the band for our filters, but use VHF
-      setVHF();
-    } else if (band == 3) {
-      setVHF();
-    } else {
-      // illegal write code, turn UHF and VHF channels both off
-      setNoFilters();
-      // turn off transmit as well to make sure we don't break anything
-      setTX(0);
-    }
-    I2Cdev::writeBitsW(devAddr, A1846S_BAND_SEL_REG, A1846S_BAND_SEL_BIT, A1846S_BAND_SEL_LENGTH, band);
+  I2Cdev::writeBitsW(devAddr, A1846S_GPIO_MODE_REG, bit, mode_len, 0xF);
 }
-uint16_t HamShield::getBand(){
-    I2Cdev::readBitsW(devAddr, A1846S_BAND_SEL_REG, A1846S_BAND_SEL_BIT, A1846S_BAND_SEL_LENGTH, radio_i2c_buf);
-    return radio_i2c_buf[0];
-}
-*/
-
-/*
-// xtal frequency (kHz)
-// 12-14MHz crystal: this reg is set to crystal freq_khz
-// 24-28MHz crystal: this reg is set to crystal freq_khz / 2
-void HamShield::setXtalFreq(uint16_t freq_kHz){
-	I2Cdev::writeWord(devAddr, A1846S_XTAL_FREQ_REG, freq_kHz);	
-}
-uint16_t HamShield::getXtalFreq(){
-	I2Cdev::readWord(devAddr, A1846S_XTAL_FREQ_REG, radio_i2c_buf);
-	
-	return radio_i2c_buf[0];
-}
-
-
-// adclk frequency (kHz)
-// 12-14MHz crystal: this reg is set to crystal freq_khz / 2
-// 24-28MHz crystal: this reg is set to crystal freq_khz / 4
-void HamShield::setAdcClkFreq(uint16_t freq_kHz){
-	I2Cdev::writeWord(devAddr, A1846S_ADCLK_FREQ_REG, freq_kHz);	
-}
-
-uint16_t HamShield::getAdcClkFreq(){
-	I2Cdev::readWord(devAddr, A1846S_ADCLK_FREQ_REG, radio_i2c_buf);
-	return radio_i2c_buf[0];
-}
-*/
 
 // clk mode
 // 12-14MHz: set to 1
@@ -357,14 +405,6 @@ bool HamShield::getClkMode(){
     return (radio_i2c_buf[0] != 0);
 }
 
-// clk example
-// 12.8MHz clock
-// A1846S_XTAL_FREQ_REG[15:0]= xtal_freq<15:0>=12.8*1000=12800
-// A1846S_ADCLK_FREQ_REG[12:0] =adclk_freq<15:0>=(12.8/2)*1000=6400
-// A1846S_CLK_MODE_REG[0]= clk_mode =1
-
-// TX/RX control
-
 // TODO: create a 25kHz setup option as well as 12.5kHz (as is implemented now)
 /*
 // channel mode
@@ -384,18 +424,22 @@ uint16_t HamShield::getChanMode(){
 void HamShield::setTX(bool on_noff){
     // make sure RX is off
     if (on_noff) {
-      setRX(false);
-      
-      // For RF6886:
-      // first turn on power
-        // set RX output off
-      setGpioHi(4); // remember that RX and TX are active low
-        // set TX output on
-      setGpioLow(5); // remember that RX and TX are active low
-      // then turn on VREG (PWM output)
-      // then apply RF signal
-      setRfPower(9); // figure out a good default number (TODO: or don't set a default)
-    }
+		tx_active = true;
+		rx_active = false;
+		setRX(false);
+		
+		if((radio_frequency >= 134000) && (radio_frequency <= 174000)) { 
+			setTxBand2m();
+		}
+		if((radio_frequency >= 200000) && (radio_frequency <= 260000)) { 
+			setTxBand1_2m();
+		}
+		if((radio_frequency >= 400000) && (radio_frequency <= 520000)) { 
+			setTxBand70cm();
+		}
+		
+		delay(50); // delay required by AU1846
+	}
 
     I2Cdev::writeBitW(devAddr, A1846S_CTL_REG, A1846S_TX_MODE_BIT, on_noff);
 }
@@ -405,17 +449,18 @@ bool HamShield::getTX(){
 }
 
 void HamShield::setRX(bool on_noff){
-   // make sure TX is off
-   if (on_noff) {
-     setTX(false);
-     
-    // set TX output off
-    setGpioHiZ(5); // remember that RX and TX are active low
-    // set RX output on
-    setGpioLow(4); // remember that RX and TX are active low
-   }
-   
-   I2Cdev::writeBitW(devAddr, A1846S_CTL_REG, A1846S_RX_MODE_BIT, on_noff);
+	// make sure TX is off
+	if (on_noff) {
+		tx_active = false;
+		rx_active = true;
+		setTX(false);
+		
+		setGpioLow(4); // V1
+		setGpioLow(5); // V2
+		delay(50); // delay required by AU1846
+	}
+  
+	I2Cdev::writeBitW(devAddr, A1846S_CTL_REG, A1846S_RX_MODE_BIT, on_noff);
 }
 bool HamShield::getRX(){
     I2Cdev::readBitW(devAddr, A1846S_CTL_REG, A1846S_RX_MODE_BIT, radio_i2c_buf);
@@ -425,25 +470,30 @@ bool HamShield::getRX(){
 void HamShield::setModeTransmit(){
     // check to see if we should allow them to do this
     if(restrictions == true) { 
-       if((radio_frequency > 139999) & (radio_frequency < 148001)) { setRX(false); setTX(true); } 
-       if((radio_frequency > 218999) & (radio_frequency < 225001)) { setRX(false); setTX(true); } 
-       if((radio_frequency > 419999) & (radio_frequency < 450001)) { setRX(false); setTX(true); }                     
+       if((radio_frequency > 139999) & (radio_frequency < 148001)) { setRX(false); } 
+       if((radio_frequency > 218999) & (radio_frequency < 225001)) { setRX(false); } 
+       if((radio_frequency > 419999) & (radio_frequency < 450001)) { setRX(false); }                     
     } else { 
-		// turn off rx, turn on tx
-		setRX(false); // break before make
 		setTX(true);
 	}
 } 
 void HamShield::setModeReceive(){
 	// turn on rx, turn off tx
-	setTX(false); // break before make
 	setRX(true);
 } 
 void HamShield::setModeOff(){
-	// turn off rx, turn off tx, set pwr_dwn bit
-	setTX(false);
-	setRX(false);
-} 
+	// turn off tx/rx
+	I2Cdev::writeBitsW(devAddr, A1846S_CTL_REG, 6, 2, 0);
+	
+	// turn off amplifiers
+	setGpioLow(4); // V1
+	setGpioLow(5); // V2
+
+	tx_active = false;
+	rx_active = true;
+	
+	//TODO: set pwr_dwn bit
+}
 
 // set tx source
 // 000 - Nothing
@@ -879,6 +929,11 @@ uint16_t HamShield::getGpioMode(uint16_t gpio){
     return radio_i2c_buf[0];
 }
 
+uint16_t HamShield::getGpios(){
+	I2Cdev::readWord(devAddr, A1846S_GPIO_MODE_REG, radio_i2c_buf);
+    return radio_i2c_buf[0];
+}
+
 // Int
 void HamShield::enableInterrupt(uint16_t interrupt){
     I2Cdev::writeBitW(devAddr, A1846S_INT_MODE_REG, interrupt, 1);
@@ -949,40 +1004,41 @@ uint16_t HamShield::readDTMFCode(){
 
 
 void HamShield::setRfPower(uint8_t pwr) {
-  
-   // using loop reference voltage input to op-amp
-   // (see RF6886 datasheet)
-   // 30 is 0.5V, which is ~min loop reference voltage
-   // 127 is 2.5V, which is ~max loop ref voltage
-   int max_pwr = 15; //167; // 167 is 3.3*255/5 - 1;
-   if (pwr > max_pwr) {
-     pwr = max_pwr; 
-   }
-  
-   I2Cdev::writeBitsW(devAddr, A1846S_PABIAS_REG, A1846S_PADRV_BIT, A1846S_PADRV_LENGTH, pwr);
+	int max_pwr = 15;
+	if (pwr > max_pwr) {
+		pwr = max_pwr; 
+	}
+
+	// turn off tx/rx
+	I2Cdev::writeBitsW(devAddr, A1846S_CTL_REG, 6, 2, 0);
+   
+	I2Cdev::writeBitsW(devAddr, A1846S_PABIAS_REG, A1846S_PADRV_BIT, A1846S_PADRV_LENGTH, pwr);
+
+   	if (rx_active) {
+		setRX(true);
+	} else if (tx_active) {
+		setTX(true);
+	}
 }
 
 
 
 bool HamShield::frequency(uint32_t freq_khz) {  
-  //TODO: there are several "special" frequencies that require extra setup of the AU1846
-  if((freq_khz >= 137000) && (freq_khz <= 174000)) { 
-      setVHF();
-      //setBand(3); // 0b11 is 134-174MHz
+
+  if((freq_khz >= 134000) && (freq_khz <= 174000)) { 
+      setTxBand2m();
       setFrequency(freq_khz);
       return true;
   }
   
   if((freq_khz >= 200000) && (freq_khz <= 260000)) { 
-      setVHF();
-      //setBand(2); // 10 is 200-260MHz
+      setTxBand1_2m();
       setFrequency(freq_khz);
       return true;
   }
   
   if((freq_khz >= 400000) && (freq_khz <= 520000)) { 
-      setUHF();
-      //setBand(00); // 00 is 400-520MHz
+      setTxBand70cm();
       setFrequency(freq_khz); 
       return true;
   }
@@ -993,7 +1049,7 @@ bool HamShield::frequency(uint32_t freq_khz) {
 
 bool HamShield::setFRSChannel(uint8_t channel) { 
   if(channel < 15) { 
-    setFrequency(FRS[channel]);
+    setFrequency(pgm_read_dword_near(FRS + channel));
     return true;
   }
   return false;
@@ -1004,11 +1060,11 @@ bool HamShield::setFRSChannel(uint8_t channel) {
 bool HamShield::setGMRSChannel(uint8_t channel) { 
   if((channel > 8) & (channel < 16)) { 
      channel = channel - 7;           // we start with 0, to try to avoid channel 8 being nothing
-     setFrequency(FRS[channel]);
+     setFrequency(pgm_read_dword_near(FRS + channel));
      return true; 
   }
   if(channel < 9) { 
-     setFrequency(GMRS[channel]);
+     setFrequency(pgm_read_dword_near(GMRS + channel));
      return true;
   }
   return false;
@@ -1018,7 +1074,7 @@ bool HamShield::setGMRSChannel(uint8_t channel) {
 
 bool HamShield::setMURSChannel(uint8_t channel) { 
   if(channel < 6) { 
-     setFrequency(MURS[channel]); 
+     setFrequency(pgm_read_dword_near(MURS + channel)); 
      return true;
   }
 }
@@ -1027,7 +1083,7 @@ bool HamShield::setMURSChannel(uint8_t channel) {
 
 bool HamShield::setWXChannel(uint8_t channel) { 
   if(channel < 8) { 
-     setFrequency(WX[channel]);
+     setFrequency(pgm_read_dword_near(WX + channel));
      setModeReceive();
      // turn off squelch?
      // channel bandwidth? 
@@ -1139,7 +1195,6 @@ uint32_t HamShield::findWhitespaceChannels(uint32_t buffer[],uint8_t buffsize, u
 void HamShield::buttonMode(uint8_t mode) { 
    pinMode(HAMSHIELD_AUX_BUTTON,INPUT);       // set the pin mode to input
    digitalWrite(HAMSHIELD_AUX_BUTTON,HIGH);   // turn on internal pull up
-   sHamShield = this; 
    if(mode == PTT_MODE) { attachInterrupt(HAMSHIELD_AUX_BUTTON, HamShield::isr_ptt, CHANGE); } 
    if(mode == RESET_MODE) { attachInterrupt(HAMSHIELD_AUX_BUTTON, HamShield::isr_reset, CHANGE); }
 }
@@ -1202,30 +1257,55 @@ bool HamShield::waitForChannel(long timeout = 0, long breakwindow = 0, int setRS
 /* Morse code out, blocking */
 
 void HamShield::morseOut(char buffer[HAMSHIELD_MORSE_BUFFER_SIZE]) { 
-
- for(int x = 0; x < strlen(buffer); x++) {
-  char output = morseLookup(buffer[x]); 
-  if(buffer[x] != ' ') { 
-  for(int m = 0; m < strlen(itu[output]); m++) {
-     if(itu[output][m] == '-') { tone(HAMSHIELD_PWM_PIN,1000,HAMSHIELD_MORSE_DOT*3); delay(HAMSHIELD_MORSE_DOT*3); }
-     else { tone(HAMSHIELD_PWM_PIN,1000,HAMSHIELD_MORSE_DOT); delay(HAMSHIELD_MORSE_DOT); }
-     delay(HAMSHIELD_MORSE_DOT);
-     }
-     delay(HAMSHIELD_MORSE_DOT*3);
-  } else { delay(HAMSHIELD_MORSE_DOT*7); } 
- }
- return;
+  int i;
+  char prev = 0;
+  for(i = 0; buffer[i] != '\0' && i < HAMSHIELD_MORSE_BUFFER_SIZE; prev = buffer[i], i++) {
+    // On a space, delay 7 dots
+    if(buffer[i] == ' ') {
+      // We delay by 4 here, if we previously sent a symbol. Otherwise 7.
+      // This could probably just be always 7 and go relatively unnoticed.
+      if(prev == 0 || prev == ' ')
+        delay(HAMSHIELD_MORSE_DOT*7);
+      else
+        delay(HAMSHIELD_MORSE_DOT*4);
+      continue;
+    }
+    // Otherwise, lookup our character symbol
+    uint8_t bits = morseLookup(buffer[i]);
+    if(bits) { // If it is a valid character...
+      do {
+        if(bits & 1) {
+          tone(HAMSHIELD_PWM_PIN, 1000, HAMSHIELD_MORSE_DOT * 3);
+          delay(HAMSHIELD_MORSE_DOT*3);
+        } else {
+          tone(HAMSHIELD_PWM_PIN, 1000, HAMSHIELD_MORSE_DOT);
+          delay(HAMSHIELD_MORSE_DOT);
+        }
+        delay(HAMSHIELD_MORSE_DOT);
+        bits >>= 1; // Shift into the next symbol
+      } while(bits != 1); // Wait for 1 termination to be all we have left
+    }
+    // End of character
+    delay(HAMSHIELD_MORSE_DOT * 3);
+  }
+  return;
 }
 
 /* Morse code lookup table */
 
-char HamShield::morseLookup(char letter) { 
- for(int x = 0; x < 54; x++) { 
-  if(letter == ascii[x]) { 
-    return x; 
-   // return itu[x];
-  } 
- }
+uint8_t HamShield::morseLookup(char letter) { 
+  uint8_t i;
+  for(i = 0; i < MORSE_TABLE_LENGTH; i++) {
+#ifndef MORSE_TABLE_PROGMEM
+    if(asciiMorse[i].ascii == letter)
+      return asciiMorse[i].itu;
+#else
+    uint16_t w = pgm_read_word_near(asciiMorseProgmem + i);
+    if( (char)((w>>8) & 0xff) == letter )
+      return (uint8_t)(w & 0xff);
+#endif // MORSE_TABLE_PROGMEM
+  }
+  return 0;
 }
 
 /* 
@@ -1357,3 +1437,13 @@ void HamShield::AFSKOut(char buffer[80]) {
 
 }
 */
+
+// This is the ADC timer handler. When enabled, we'll see what we're supposed
+// to be reading/handling, and trigger those on the main object.
+/*ISR(ADC_vect) {
+  TIFR1 = _BV(ICF1); // Clear the timer flag
+
+  if(HamShield::sHamShield->afsk.enabled()) {
+    HamShield::sHamShield->afsk.timer();
+  }
+}*/

HamShield.h

@@ -8,17 +8,23 @@
 #ifndef _HAMSHIELD_H_
 #define _HAMSHIELD_H_
 
-#include "I2Cdev_rda.h"
+//#include "I2Cdev_rda.h"
+#include "I2Cdev.h"
+#include "SimpleFIFO.h"
+#include "AFSK.h"
+#include "DDS.h"
 #include <avr/pgmspace.h>
 
 // HamShield constants
 
 #define HAMSHIELD_MORSE_DOT             100    // Morse code dot length (smaller is faster WPM)
 #define HAMSHIELD_MORSE_BUFFER_SIZE      80    // Char buffer size for morse code text
-#define HAMSHIELD_AUX_BUTTON              5    // Pin assignment for AUX button
-#define HAMSHIELD_PWM_PIN                 11    // Pin assignment for PWM output
+#define HAMSHIELD_AUX_BUTTON              2    // Pin assignment for AUX button
+#define HAMSHIELD_PWM_PIN                 3    // Pin assignment for PWM output
 #define HAMSHIELD_EMPTY_CHANNEL_RSSI   -110    // Default threshold where channel is considered "clear"
 
+#define HAMSHIELD_AFSK_RX_FIFO_LEN 16
+
 // button modes
 #define PTT_MODE 1
 #define RESET_MODE 2
@@ -252,6 +258,9 @@
 
 class HamShield {
     public:
+	    // public singleton for ISRs to reference
+        static HamShield *sHamShield; // HamShield singleton, used for ISRs mostly
+		
         HamShield();
         HamShield(uint8_t address);
 
@@ -262,245 +271,205 @@ class HamShield {
         uint16_t readCtlReg();
         void softReset();
 		
-	// center frequency
-	void setFrequency(uint32_t freq_khz);
-	uint32_t getFrequency();
+        // restrictions control
+        void dangerMode();
+        void safeMode();
 		
-	// band
-	// 00 - 400-520MHz
-	// 10 - 200-260MHz
-	// 11 - 134-174MHz
-	void setBand(uint16_t band);
-	uint16_t getBand();
-	
-        void setUHF();
-        void setVHF();
-        void setNoFilters();
-        bool frequency(uint32_t freq_khz);
-        
-	// xtal frequency (kHz)
-	// 12-14MHz crystal: this reg is set to crystal freq_khz
-	// 24-28MHz crystal: this reg is set to crystal freq_khz / 2
-	void setXtalFreq(uint16_t freq_kHz);
-	uint16_t getXtalFreq();
-		
-	// adclk frequency (kHz)
-	// 12-14MHz crystal: this reg is set to crystal freq_khz / 2
-	// 24-28MHz crystal: this reg is set to crystal freq_khz / 4
-	void setAdcClkFreq(uint16_t freq_kHz);
-	uint16_t getAdcClkFreq();
-
-	// clk mode
-	// 12-14MHz: set to 1
-	// 24-28MHz: set to 0
-	void setClkMode(bool LFClk);
-	bool getClkMode();
-		
-	// clk example
-	// 12.8MHz clock
-	// A1846S_XTAL_FREQ_REG[15:0]= xtal_freq<15:0>=12.8*1000=12800
-	// A1846S_ADCLK_FREQ_REG[12:0] =adclk_freq<15:0>=(12.8/2)*1000=6400
-	// A1846S_CLK_MODE_REG[0]= clk_mode =1
-	
-	// TX/RX control
-		
-	// channel mode
-	// 11 - 25kHz channel
-	// 00 - 12.5kHz channel
-	// 10,01 - reserved
-	void setChanMode(uint16_t mode);
-	uint16_t getChanMode();
-	
-	// choose tx or rx
-	void setTX(bool on_noff);
-	bool getTX();
-	
-	void setRX(bool on_noff);
-	bool getRX();
-	
-	void setModeTransmit(); // turn off rx, turn on tx
-	void setModeReceive(); // turn on rx, turn off tx
-	void setModeOff(); // turn off rx, turn off tx, set pwr_dwn bit
-	
-	// set tx source
-	// 00 - Mic source
-	// 01 - sine source from tone2
-	// 10 - tx code from GPIO1 code_in (gpio1<1:0> must be set to 01)
-	// 11 - no tx source
-	void setTxSource(uint16_t tx_source);
-	void setTxSourceMic();
-	void setTxSourceTone1();
-	void setTxSourceTone2();
-	void setTxSourceTones();
-	void setTxSourceNone();
-	uint16_t getTxSource();
-	
-	// set PA_bias voltage
-	//    000000: 1.01V
-	//    000001:1.05V
-	//    000010:1.09V
-	//    000100: 1.18V
-	//    001000: 1.34V
-	//    010000: 1.68V
-	//    100000: 2.45V
-	//    1111111:3.13V
-	void setPABiasVoltage(uint16_t voltage);
-	uint16_t getPABiasVoltage();
-	
-	// Subaudio settings
-	
-	//   Ctcss/cdcss mode sel
-	//      x00=disable,
-	//      001=inner ctcss en,
-	//      010= inner cdcss en
-	//      101= outer ctcss en,
-	//      110=outer cdcss en
-	//      others =disable
-	void setCtcssCdcssMode(uint16_t mode);
-	uint16_t getCtcssCdcssMode();
-	void setInnerCtcssMode();
-	void setInnerCdcssMode();
-	void setOuterCtcssMode();
-	void setOuterCdcssMode();
-	void disableCtcssCdcss();
-	
-	//   Ctcss_sel
-	//      1 = ctcss_cmp/cdcss_cmp out via gpio
-	//      0 = ctcss/cdcss sdo out vio gpio
-	void setCtcssSel(bool cmp_nsdo);
-	bool getCtcssSel();
-	
-	//   Cdcss_sel
-	//      1 = long (24 bit) code
-	//      0 = short(23 bit) code
-	void setCdcssSel(bool long_nshort);
-	bool getCdcssSel();
-		// Cdcss neg_det_en
-	void enableCdcssNegDet();
-	void disableCdcssNegDet();
-	bool getCdcssNegDetEnabled();
-	
-	// Cdcss pos_det_en
-	void enableCdcssPosDet();
-	void disableCdcssPosDet();
-	bool getCdcssPosDetEnabled();
-
-	// css_det_en
-	void enableCssDet();
-	void disableCssDet();
-	bool getCssDetEnabled();
-	
-	// ctcss freq
-        void setCtcss(float freq);
-	void setCtcssFreq(uint16_t freq);
-	uint16_t getCtcssFreq();
-	void setCtcssFreqToStandard(); // freq must be 134.4Hz for standard cdcss mode
-	
-	// cdcss codes
-	void setCdcssCode(uint16_t code);
-	uint16_t getCdcssCode();
+		bool frequency(uint32_t freq_khz);
+		uint32_t getFrequency();
 			
-	// SQ
-	void setSQOn();
-	void setSQOff();
-	bool getSQState();
-	
-	// SQ threshold
-	void setSQHiThresh(uint16_t sq_hi_threshold); // Sq detect high th, rssi_cmp will be 1 when rssi>th_h_sq, unit 1/8dB
-	uint16_t getSQHiThresh();
-	void setSQLoThresh(uint16_t sq_lo_threshold); // Sq detect low th, rssi_cmp will be 0 when rssi<th_l_sq && time delay meet, unit 1/8 dB
-	uint16_t getSQLoThresh();
-	
-	// SQ out select
-	void setSQOutSel();
-	void clearSQOutSel();
-	bool getSQOutSel();
-	
-	// VOX
-	void setVoxOn();
-	void setVoxOff();
-	bool getVoxOn();
-	
-	// Vox Threshold
-	void setVoxOpenThresh(uint16_t vox_open_thresh); // When vssi > th_h_vox, then vox will be 1(unit mV )
-	uint16_t getVoxOpenThresh();
-	void setVoxShutThresh(uint16_t vox_shut_thresh); // When vssi < th_l_vox && time delay meet, then vox will be 0 (unit mV )
-	uint16_t getVoxShutThresh();
-	
-	// Tail Noise
-	void enableTailNoiseElim();
-	void disableTailNoiseElim();
-	bool getTailNoiseElimEnabled();
-	
-	// tail noise shift select
-	//   Select ctcss phase shift when use tail eliminating function when TX
-	//     00 = 120 degree shift
-	//     01 = 180 degree shift
-	//     10 = 240 degree shift
-	//     11 = reserved
-	void setShiftSelect(uint16_t shift_sel);
-	uint16_t getShiftSelect();
-	
-	// DTMF
-	void setDTMFC0(uint16_t freq);
-	uint16_t getDTMFC0();
-	void setDTMFC1(uint16_t freq);
-	uint16_t getDTMFC1();	
-	void setDTMFC2(uint16_t freq);
-	uint16_t getDTMFC2();
-	void setDTMFC3(uint16_t freq);
-	uint16_t getDTMFC3();
-	void setDTMFC4(uint16_t freq);
-	uint16_t getDTMFC4();
-	void setDTMFC5(uint16_t freq);
-	uint16_t getDTMFC5();
-	void setDTMFC6(uint16_t freq);
-	uint16_t getDTMFC6();
-	void setDTMFC7(uint16_t freq);
-	uint16_t getDTMFC7();
-	
-	// TX FM deviation
-	void setFMVoiceCssDeviation(uint16_t deviation);
-	uint16_t getFMVoiceCssDeviation();
-	void setFMCssDeviation(uint16_t deviation);
-	uint16_t getFMCssDeviation();
-	
-	// RX voice range
-	void setVolume1(uint16_t volume);
-	uint16_t getVolume1();
-	void setVolume2(uint16_t volume);
-	uint16_t getVolume2();
-	
-	// GPIO
-	void setGpioMode(uint16_t gpio, uint16_t mode);
-	void setGpioHiZ(uint16_t gpio);
-	void setGpioFcn(uint16_t gpio);
-	void setGpioLow(uint16_t gpio);
-	void setGpioHi(uint16_t gpio);
-	uint16_t getGpioMode(uint16_t gpio);
-	
-	// Int
-	void enableInterrupt(uint16_t interrupt);
-	void disableInterrupt(uint16_t interrupt);
-	bool getInterruptEnabled(uint16_t interrupt);
-	
-	// ST mode
-	void setStMode(uint16_t mode);
-	uint16_t getStMode();
-	void setStFullAuto();
-	void setStRxAutoTxManu();
-	void setStFullManu();
-	
-	// Pre-emphasis, De-emphasis filter
-	void bypassPreDeEmph();
-	void usePreDeEmph();
-	bool getPreDeEmphEnabled();
-	
-	// Read Only Status Registers
-	int16_t readRSSI();
-	uint16_t readVSSI();
-	uint16_t readDTMFIndex(); // may want to split this into two (index1 and index2)
-	uint16_t readDTMFCode();
+		// channel mode
+		// 11 - 25kHz channel
+		// 00 - 12.5kHz channel
+		// 10,01 - reserved
+		void setChanMode(uint16_t mode);
+		uint16_t getChanMode();
+		
+		void setModeTransmit(); // turn off rx, turn on tx
+		void setModeReceive(); // turn on rx, turn off tx
+		void setModeOff(); // turn off rx, turn off tx, set pwr_dwn bit
+		
+		// set tx source
+		// 00 - Mic source
+		// 01 - sine source from tone2
+		// 10 - tx code from GPIO1 code_in (gpio1<1:0> must be set to 01)
+		// 11 - no tx source
+		void setTxSource(uint16_t tx_source);
+		void setTxSourceMic();
+		void setTxSourceTone1();
+		void setTxSourceTone2();
+		void setTxSourceTones();
+		void setTxSourceNone();
+		uint16_t getTxSource();
+		
+		// PA bias voltage is unused (maybe remove this)
+		// set PA_bias voltage
+		//    000000: 1.01V
+		//    000001:1.05V
+		//    000010:1.09V
+		//    000100: 1.18V
+		//    001000: 1.34V
+		//    010000: 1.68V
+		//    100000: 2.45V
+		//    1111111:3.13V
+		void setPABiasVoltage(uint16_t voltage);
+		uint16_t getPABiasVoltage();
+		
+		// Subaudio settings
+		
+		//   Ctcss/cdcss mode sel
+		//      x00=disable,
+		//      001=inner ctcss en,
+		//      010= inner cdcss en
+		//      101= outer ctcss en,
+		//      110=outer cdcss en
+		//      others =disable
+		void setCtcssCdcssMode(uint16_t mode);
+		uint16_t getCtcssCdcssMode();
+		void setInnerCtcssMode();
+		void setInnerCdcssMode();
+		void setOuterCtcssMode();
+		void setOuterCdcssMode();
+		void disableCtcssCdcss();
+		
+		//   Ctcss_sel
+		//      1 = ctcss_cmp/cdcss_cmp out via gpio
+		//      0 = ctcss/cdcss sdo out vio gpio
+		void setCtcssSel(bool cmp_nsdo);
+		bool getCtcssSel();
+		
+		//   Cdcss_sel
+		//      1 = long (24 bit) code
+		//      0 = short(23 bit) code
+		void setCdcssSel(bool long_nshort);
+		bool getCdcssSel();
+		// Cdcss neg_det_en
+		void enableCdcssNegDet();
+		void disableCdcssNegDet();
+		bool getCdcssNegDetEnabled();
+		
+		// Cdcss pos_det_en
+		void enableCdcssPosDet();
+		void disableCdcssPosDet();
+		bool getCdcssPosDetEnabled();
+
+		// css_det_en
+		void enableCssDet();
+		void disableCssDet();
+		bool getCssDetEnabled();
+		
+		// ctcss freq
+		void setCtcss(float freq);
+		void setCtcssFreq(uint16_t freq);
+		uint16_t getCtcssFreq();
+		void setCtcssFreqToStandard(); // freq must be 134.4Hz for standard cdcss mode
+		
+		// cdcss codes
+		void setCdcssCode(uint16_t code);
+		uint16_t getCdcssCode();
+				
+		// SQ
+		void setSQOn();
+		void setSQOff();
+		bool getSQState();
+		
+		// SQ threshold
+		void setSQHiThresh(uint16_t sq_hi_threshold); // Sq detect high th, rssi_cmp will be 1 when rssi>th_h_sq, unit 1/8dB
+		uint16_t getSQHiThresh();
+		void setSQLoThresh(uint16_t sq_lo_threshold); // Sq detect low th, rssi_cmp will be 0 when rssi<th_l_sq && time delay meet, unit 1/8 dB
+		uint16_t getSQLoThresh();
+		
+		// SQ out select
+		void setSQOutSel();
+		void clearSQOutSel();
+		bool getSQOutSel();
+		
+		// VOX
+		void setVoxOn();
+		void setVoxOff();
+		bool getVoxOn();
+		
+		// Vox Threshold
+		void setVoxOpenThresh(uint16_t vox_open_thresh); // When vssi > th_h_vox, then vox will be 1(unit mV )
+		uint16_t getVoxOpenThresh();
+		void setVoxShutThresh(uint16_t vox_shut_thresh); // When vssi < th_l_vox && time delay meet, then vox will be 0 (unit mV )
+		uint16_t getVoxShutThresh();
+		
+		// Tail Noise
+		void enableTailNoiseElim();
+		void disableTailNoiseElim();
+		bool getTailNoiseElimEnabled();
+		
+		// tail noise shift select
+		//   Select ctcss phase shift when use tail eliminating function when TX
+		//     00 = 120 degree shift
+		//     01 = 180 degree shift
+		//     10 = 240 degree shift
+		//     11 = reserved
+		void setShiftSelect(uint16_t shift_sel);
+		uint16_t getShiftSelect();
+		
+		// DTMF
+		void setDTMFC0(uint16_t freq);
+		uint16_t getDTMFC0();
+		void setDTMFC1(uint16_t freq);
+		uint16_t getDTMFC1();	
+		void setDTMFC2(uint16_t freq);
+		uint16_t getDTMFC2();
+		void setDTMFC3(uint16_t freq);
+		uint16_t getDTMFC3();
+		void setDTMFC4(uint16_t freq);
+		uint16_t getDTMFC4();
+		void setDTMFC5(uint16_t freq);
+		uint16_t getDTMFC5();
+		void setDTMFC6(uint16_t freq);
+		uint16_t getDTMFC6();
+		void setDTMFC7(uint16_t freq);
+		uint16_t getDTMFC7();
+		
+		// TX FM deviation
+		void setFMVoiceCssDeviation(uint16_t deviation);
+		uint16_t getFMVoiceCssDeviation();
+		void setFMCssDeviation(uint16_t deviation);
+		uint16_t getFMCssDeviation();
+		
+		// RX voice range
+		void setVolume1(uint16_t volume);
+		uint16_t getVolume1();
+		void setVolume2(uint16_t volume);
+		uint16_t getVolume2();
+		
+		// GPIO
+		void setGpioMode(uint16_t gpio, uint16_t mode);
+		void setGpioHiZ(uint16_t gpio);
+		void setGpioFcn(uint16_t gpio);
+		void setGpioLow(uint16_t gpio);
+		void setGpioHi(uint16_t gpio);
+		uint16_t getGpioMode(uint16_t gpio);
+		uint16_t getGpios();
+		
+		// Int
+		void enableInterrupt(uint16_t interrupt);
+		void disableInterrupt(uint16_t interrupt);
+		bool getInterruptEnabled(uint16_t interrupt);
+		
+		// ST mode
+		void setStMode(uint16_t mode);
+		uint16_t getStMode();
+		void setStFullAuto();
+		void setStRxAutoTxManu();
+		void setStFullManu();
+		
+		// Pre-emphasis, De-emphasis filter
+		void bypassPreDeEmph();
+		void usePreDeEmph();
+		bool getPreDeEmphEnabled();
+		
+		// Read Only Status Registers
+		int16_t readRSSI();
+		uint16_t readVSSI();
+		uint16_t readDTMFIndex(); // may want to split this into two (index1 and index2)
+		uint16_t readDTMFCode();
 
         // set output power of radio
         void setRfPower(uint8_t pwr);
@@ -511,11 +480,6 @@ class HamShield {
         bool setMURSChannel(uint8_t channel);
         bool setWXChannel(uint8_t channel);
         uint8_t scanWXChannel();
- 
-
-        // restrictions control
-        void dangerMode();
-        void safeMode();
   
         // utilities
         uint32_t scanMode(uint32_t start,uint32_t stop, uint8_t speed, uint16_t step, uint16_t threshold);
@@ -525,34 +489,68 @@ class HamShield {
         void buttonMode(uint8_t mode);
         static void isr_ptt();
         static void isr_reset();
-	void morseOut(char buffer[HAMSHIELD_MORSE_BUFFER_SIZE]);
-	char morseLookup(char letter);
+		void morseOut(char buffer[HAMSHIELD_MORSE_BUFFER_SIZE]);
+		uint8_t morseLookup(char letter);
         bool waitForChannel(long timeout, long breakwindow, int setRSSI);
         void SSTVVISCode(int code);
         void SSTVTestPattern(int code);
         void toneWait(uint16_t freq, long timer);
         void toneWaitU(uint16_t freq, long timer);
         bool parityCalc(int code);
-       // void AFSKOut(char buffer[80]); 
-
+		// void AFSKOut(char buffer[80]); 
 
+		// AFSK routines
+		bool AFSKStart();
+		bool AFSKEnabled() { return afsk.enabled(); }
+		bool AFSKStop();
+		bool AFSKOut(const char *);
+       
+		class AFSK afsk;
+       
     private:
         uint8_t devAddr;
         uint16_t radio_i2c_buf[4];
-        int pwr_control_pin;
+		bool tx_active;
+		bool rx_active;
         uint32_t radio_frequency;
         uint32_t FRS[];
         uint32_t GMRS[];
         uint32_t MURS[];
         uint32_t WX[];
-        static HamShield *sHamShield; // HamShield singleton, used for ISRs mostly
-         
-//          int8_t A1846S::readWord(uint8_t devAddr, uint8_t regAddr, uint16_t *data, uint16_t timeout);
-//          int8_t A1846S::readBits(uint8_t devAddr, uint8_t regAddr, uint8_t bitStart, uint8_t length, uint16_t *data, uint16_t timeout);
-//          int8_t A1846S::readBit(uint8_t devAddr, uint8_t regAddr, uint8_t bitNum, uint16_t *data, uint16_t timeout);
-//          int8_t A1846S::writeWord(uint8_t devAddr, uint8_t regAddr, uint16_t *data, uint16_t timeout);
-//          bool A1846S::writeBits(uint8_t devAddr, uint8_t regAddr, uint8_t bitStart, uint8_t length, uint16_t data);
-//          bool A1846S::writeBit(uint8_t devAddr, uint8_t regAddr, uint8_t bitNum, uint16_t data);
+		
+		// private utility functions
+		// these functions should not be called in the Arduino sketch
+		// just use the above public functions to do everything
+		
+		void setFrequency(uint32_t freq_khz);
+		void setTxBand2m();
+		void setTxBand1_2m();
+		void setTxBand70cm();
+		
+		// xtal frequency (kHz)
+		// 12-14MHz crystal: this reg is set to crystal freq_khz
+		// 24-28MHz crystal: this reg is set to crystal freq_khz / 2
+		void setXtalFreq(uint16_t freq_kHz);
+		uint16_t getXtalFreq();
+			
+		// adclk frequency (kHz)
+		// 12-14MHz crystal: this reg is set to crystal freq_khz / 2
+		// 24-28MHz crystal: this reg is set to crystal freq_khz / 4
+		void setAdcClkFreq(uint16_t freq_kHz);
+		uint16_t getAdcClkFreq();
+
+		// clk mode
+		// 12-14MHz: set to 1
+		// 24-28MHz: set to 0
+		void setClkMode(bool LFClk);
+		bool getClkMode();
+		
+		// choose tx or rx
+		void setTX(bool on_noff);
+		bool getTX();
+		
+		void setRX(bool on_noff);
+		bool getRX();
 };
 
 #endif /* _HAMSHIELD_H_ */

I2Cdev.cpp

@@ -1,6 +1,6 @@
 // I2Cdev library collection - Main I2C device class
 // Abstracts bit and byte I2C R/W functions into a convenient class
-// 6/9/2012 by Jeff Rowberg <jeff@rowberg.net>
+// 2013-06-05 by Jeff Rowberg <jeff@rowberg.net>
 //
 // Changelog:
 //      2013-05-06 - add Francesco Ferrara's Fastwire v0.24 implementation with small modifications
@@ -43,28 +43,28 @@ THE SOFTWARE.
 ===============================================
 */
 
-#include "I2Cdev_rda.h"
+#include "I2Cdev.h"
 
 #if I2CDEV_IMPLEMENTATION == I2CDEV_ARDUINO_WIRE
 
     #ifdef I2CDEV_IMPLEMENTATION_WARNINGS
         #if ARDUINO < 100
             #warning Using outdated Arduino IDE with Wire library is functionally limiting.
-            #warning Arduino IDE v1.0.1+ with I2Cdev Fastwire implementation is recommended.
+            #warning Arduino IDE v1.6.5+ with I2Cdev Fastwire implementation is recommended.
             #warning This I2Cdev implementation does not support:
             #warning - Repeated starts conditions
             #warning - Timeout detection (some Wire requests block forever)
         #elif ARDUINO == 100
             #warning Using outdated Arduino IDE with Wire library is functionally limiting.
-            #warning Arduino IDE v1.0.1+ with I2Cdev Fastwire implementation is recommended.
+            #warning Arduino IDE v1.6.5+ with I2Cdev Fastwire implementation is recommended.
             #warning This I2Cdev implementation does not support:
             #warning - Repeated starts conditions
             #warning - Timeout detection (some Wire requests block forever)
         #elif ARDUINO > 100
-            #warning Using current Arduino IDE with Wire library is functionally limiting.
-            #warning Arduino IDE v1.0.1+ with I2CDEV_BUILTIN_FASTWIRE implementation is recommended.
+            /*#warning Using current Arduino IDE with Wire library is functionally limiting.
+            #warning Arduino IDE v1.6.5+ with I2CDEV_BUILTIN_FASTWIRE implementation is recommended.
             #warning This I2Cdev implementation does not support:
-            #warning - Timeout detection (some Wire requests block forever)
+            #warning - Timeout detection (some Wire requests block forever)*/
         #endif
     #endif
 
@@ -405,8 +405,7 @@ int8_t I2Cdev::readWords(uint8_t devAddr, uint8_t regAddr, uint8_t length, uint1
                 Wire.endTransmission();
             }
         #elif (ARDUINO > 100)
-			//Serial.println("wires");
-			// Arduino v1.0.1+, Wire library
+            // Arduino v1.0.1+, Wire library
             // Adds official support for repeated start condition, yay!
 
             // I2C/TWI subsystem uses internal buffer that breaks with large data requests
@@ -415,8 +414,8 @@ int8_t I2Cdev::readWords(uint8_t devAddr, uint8_t regAddr, uint8_t length, uint1
             for (uint8_t k = 0; k < length * 2; k += min(length * 2, BUFFER_LENGTH)) {
                 Wire.beginTransmission(devAddr);
                 Wire.write(regAddr);
-                Wire.endTransmission(false);
-//                Wire.beginTransmission(devAddr);
+                Wire.endTransmission();
+                Wire.beginTransmission(devAddr);
                 Wire.requestFrom(devAddr, (uint8_t)(length * 2)); // length=words, this wants bytes
         
                 bool msb = true; // starts with MSB, then LSB

I2Cdev.h

@@ -1,8 +1,9 @@
 // I2Cdev library collection - Main I2C device class header file
 // Abstracts bit and byte I2C R/W functions into a convenient class
-// 6/9/2012 by Jeff Rowberg <jeff@rowberg.net>
+// 2013-06-05 by Jeff Rowberg <jeff@rowberg.net>
 //
 // Changelog:
+//      2015-10-30 - simondlevy : support i2c_t3 for Teensy3.1
 //      2013-05-06 - add Francesco Ferrara's Fastwire v0.24 implementation with small modifications
 //      2013-05-05 - fix issue with writing bit values to words (Sasquatch/Farzanegan)
 //      2012-06-09 - fix major issue with reading > 32 bytes at a time with Arduino Wire
@@ -43,14 +44,16 @@ THE SOFTWARE.
 ===============================================
 */
 
-#ifndef _I2CDEV_RDA_H_
-#define _I2CDEV_RDA_H_
+#ifndef _I2CDEV_H_
+#define _I2CDEV_H_
 
 // -----------------------------------------------------------------------------
 // I2C interface implementation setting
 // -----------------------------------------------------------------------------
+#ifndef I2CDEV_IMPLEMENTATION
 #define I2CDEV_IMPLEMENTATION       I2CDEV_ARDUINO_WIRE
 //#define I2CDEV_IMPLEMENTATION       I2CDEV_BUILTIN_FASTWIRE
+#endif // I2CDEV_IMPLEMENTATION
 
 // comment this out if you are using a non-optimal IDE/implementation setting
 // but want the compiler to shut up about it
@@ -76,7 +79,10 @@ THE SOFTWARE.
     #else
         #include "Arduino.h"
     #endif
-    #if I2CDEV_IMPLEMENTATION == I2CDEV_ARDUINO_WIRE
+    #if defined(CORE_TEENSY) && defined(__MK20DX256__)
+        #include <i2c_t3.h>
+        #define BUFFER_LENGTH 32
+    #elif I2CDEV_IMPLEMENTATION == I2CDEV_ARDUINO_WIRE
         #include <Wire.h>
     #endif
     #if I2CDEV_IMPLEMENTATION == I2CDEV_I2CMASTER_LIBRARY
@@ -84,13 +90,19 @@ THE SOFTWARE.
     #endif
 #endif
 
+#ifdef SPARK
+    #include <spark_wiring_i2c.h>
+    #define ARDUINO 101
+#endif
+
+
 // 1000ms default read timeout (modify with "I2Cdev::readTimeout = [ms];")
 #define I2CDEV_DEFAULT_READ_TIMEOUT     1000
 
 class I2Cdev {
     public:
         I2Cdev();
-        
+
         static int8_t readBit(uint8_t devAddr, uint8_t regAddr, uint8_t bitNum, uint8_t *data, uint16_t timeout=I2Cdev::readTimeout);
         static int8_t readBitW(uint8_t devAddr, uint8_t regAddr, uint8_t bitNum, uint16_t *data, uint16_t timeout=I2Cdev::readTimeout);
         static int8_t readBits(uint8_t devAddr, uint8_t regAddr, uint8_t bitStart, uint8_t length, uint8_t *data, uint16_t timeout=I2Cdev::readTimeout);
@@ -119,7 +131,7 @@ class I2Cdev {
     // Copyright(C) 2012
     // Francesco Ferrara
     //////////////////////
-    
+
     /* Master */
     #define TW_START                0x08
     #define TW_REP_START            0x10
@@ -162,24 +174,24 @@ class I2Cdev {
     // Originally offered to the i2cdevlib project at http://arduino.cc/forum/index.php/topic,68210.30.html
 
     #define NBWIRE_BUFFER_LENGTH 32
-    
+
     class TwoWire {
         private:
             static uint8_t rxBuffer[];
             static uint8_t rxBufferIndex;
             static uint8_t rxBufferLength;
-        
+
             static uint8_t txAddress;
             static uint8_t txBuffer[];
             static uint8_t txBufferIndex;
             static uint8_t txBufferLength;
-        
+
             // static uint8_t transmitting;
             static void (*user_onRequest)(void);
             static void (*user_onReceive)(int);
             static void onRequestService(void);
             static void onReceiveService(uint8_t*, int);
-    
+
         public:
             TwoWire();
             void begin();
@@ -201,25 +213,25 @@ class I2Cdev {
             void onReceive(void (*)(int));
             void onRequest(void (*)(void));
     };
-    
+
     #define TWI_READY   0
     #define TWI_MRX     1
     #define TWI_MTX     2
     #define TWI_SRX     3
     #define TWI_STX     4
-    
+
     #define TW_WRITE    0
     #define TW_READ     1
-    
+
     #define TW_MT_SLA_NACK      0x20
     #define TW_MT_DATA_NACK     0x30
-    
+
     #define CPU_FREQ            16000000L
     #define TWI_FREQ            100000L
     #define TWI_BUFFER_LENGTH   32
-    
+
     /* TWI Status is in TWSR, in the top 5 bits: TWS7 - TWS3 */
-    
+
     #define TW_STATUS_MASK              (_BV(TWS7)|_BV(TWS6)|_BV(TWS5)|_BV(TWS4)|_BV(TWS3))
     #define TW_STATUS                   (TWSR & TW_STATUS_MASK)
     #define TW_START                    0x08
@@ -250,20 +262,20 @@ class I2Cdev {
     #define TW_SR_STOP                  0xA0
     #define TW_NO_INFO                  0xF8
     #define TW_BUS_ERROR                0x00
-    
+
     //#define _MMIO_BYTE(mem_addr) (*(volatile uint8_t *)(mem_addr))
     //#define _SFR_BYTE(sfr) _MMIO_BYTE(_SFR_ADDR(sfr))
-    
+
     #ifndef sbi // set bit
         #define sbi(sfr, bit) (_SFR_BYTE(sfr) |= _BV(bit))
     #endif // sbi
-    
+
     #ifndef cbi // clear bit
         #define cbi(sfr, bit) (_SFR_BYTE(sfr) &= ~_BV(bit))
     #endif // cbi
-    
+
     extern TwoWire Wire;
 
 #endif // I2CDEV_IMPLEMENTATION == I2CDEV_BUILTIN_NBWIRE
 
-#endif /* _I2CDEV_RDA_H_ */
+#endif /* _I2CDEV_H_ */

KISS.cpp

@@ -0,0 +1,88 @@
+#include <HamShield.h>
+#include "AFSK.h"
+#include "KISS.h"
+
+//AFSK::Packet kissPacket;
+bool inFrame = false;
+uint8_t kissBuffer[PACKET_MAX_LEN];
+uint16_t kissLen = 0;
+
+// Inside the KISS loop, we basically wait for data to come in from the
+// KISS equipment, and look if we have anything to relay along
+void KISS::loop() {
+  static bool currentlySending = false;
+  if(radio->afsk.decoder.read() || radio->afsk.rxPacketCount()) {
+     // A true return means something was put onto the packet FIFO
+     // If we actually have data packets in the buffer, process them all now
+     while(radio->afsk.rxPacketCount()) {
+       AFSK::Packet *packet = radio->afsk.getRXPacket();
+       if(packet) {
+         writePacket(packet);
+         AFSK::PacketBuffer::freePacket(packet);
+       }
+     }
+   }
+   // Check if we have incoming data to turn into a packet
+   while(io->available()) {
+     uint8_t c = (uint8_t)io->read();
+     if(c == KISS_FEND) {
+       if(inFrame && kissLen > 0) {
+         int i;
+         AFSK::Packet *packet = AFSK::PacketBuffer::makePacket(PACKET_MAX_LEN);
+         packet->start();
+         for(i = 0; i < kissLen; i++) {
+           packet->appendFCS(kissBuffer[i]);
+         }
+         packet->finish();
+         radio->afsk.encoder.putPacket(packet);
+       }
+       kissLen = 0;
+       inFrame = false;
+     }
+     // We're inside the boundaries of a FEND
+     if(inFrame) {
+       // Unescape the incoming data
+       if(c == KISS_FESC) {
+         c = io->read();
+         if(c == KISS_TFESC) {
+           c = KISS_FESC;
+         } else {
+           c = KISS_FEND;
+         }
+       }
+       kissBuffer[kissLen++] = c;
+     }
+     if(kissLen == 0 && c != KISS_FEND) {
+       if((c & 0xf) == 0) // First byte<3:0> should be a 0, otherwise we're having options
+         inFrame = true;
+     }
+   }
+   if(radio->afsk.txReady()) {
+     radio->setModeTransmit();
+     currentlySending = true;
+     if(!radio->afsk.txStart()) { // Unable to start for some reason
+       radio->setModeReceive();
+       currentlySending = false;
+     }
+   }
+   if(currentlySending && radio->afsk.encoder.isDone()) {
+    radio->setModeReceive();
+    currentlySending = false;
+  }
+}
+
+void KISS::writePacket(AFSK::Packet *p) {
+  int i;
+  io->write(KISS_FEND);
+  io->write((uint8_t)0); // Host to TNC port identifier
+  for(i = 0; i < p->len-2; i++) {
+    char c = p->getByte(i);
+    if(c == KISS_FEND || c == KISS_FESC) {
+      io->write(KISS_FESC);
+      io->write((c==KISS_FEND?KISS_TFEND:KISS_TFESC));
+    } else {
+      io->write(c);
+    }
+  }
+  io->write(KISS_FEND);
+}

KISS.h

@@ -0,0 +1,35 @@
+#ifndef _KISS_H_
+#define _KISS_H_
+
+#include <HamShield.h>
+#include "AFSK.h"
+
+#define KISS_FEND 0xC0
+#define KISS_FESC 0xDB
+#define KISS_TFEND 0xDC
+#define KISS_TFESC 0xDD
+
+class KISS {
+public:
+  KISS(Stream *_io, HamShield *h, DDS *d) : io(_io), radio(h), dds(d) {}
+  bool read();
+  void writePacket(AFSK::Packet *);
+  void loop();
+  inline void isr() {
+    static uint8_t tcnt = 0;
+    TIFR1 = _BV(ICF1); // Clear the timer flag
+    dds->clockTick();
+    if(++tcnt == (DDS_REFCLK_DEFAULT/9600)) {
+      //PORTD |= _BV(2); // Diagnostic pin (D2)
+      radio->afsk.timer();
+      tcnt = 0;
+    }
+    //PORTD &= ~(_BV(2));
+  }
+private:
+  Stream *io;
+  HamShield *radio;
+  DDS *dds;
+};
+
+#endif /* _KISS_H_ */

LICENSE

@@ -0,0 +1,661 @@
+ GNU AFFERO GENERAL PUBLIC LICENSE
+                       Version 3, 19 November 2007
+
+ Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/>
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+                            Preamble
+
+  The GNU Affero General Public License is a free, copyleft license for
+software and other kinds of works, specifically designed to ensure
+cooperation with the community in the case of network server software.
+
+  The licenses for most software and other practical works are designed
+to take away your freedom to share and change the works.  By contrast,
+our General Public Licenses are intended to guarantee your freedom to
+share and change all versions of a program--to make sure it remains free
+software for all its users.
+
+  When we speak of free software, we are referring to freedom, not
+price.  Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+them if you wish), that you receive source code or can get it if you
+want it, that you can change the software or use pieces of it in new
+free programs, and that you know you can do these things.
+
+  Developers that use our General Public Licenses protect your rights
+with two steps: (1) assert copyright on the software, and (2) offer
+you this License which gives you legal permission to copy, distribute
+and/or modify the software.
+
+  A secondary benefit of defending all users' freedom is that
+improvements made in alternate versions of the program, if they
+receive widespread use, become available for other developers to
+incorporate.  Many developers of free software are heartened and
+encouraged by the resulting cooperation.  However, in the case of
+software used on network servers, this result may fail to come about.
+The GNU General Public License permits making a modified version and
+letting the public access it on a server without ever releasing its
+source code to the public.
+
+  The GNU Affero General Public License is designed specifically to
+ensure that, in such cases, the modified source code becomes available
+to the community.  It requires the operator of a network server to
+provide the source code of the modified version running there to the
+users of that server.  Therefore, public use of a modified version, on
+a publicly accessible server, gives the public access to the source
+code of the modified version.
+
+  An older license, called the Affero General Public License and
+published by Affero, was designed to accomplish similar goals.  This is
+a different license, not a version of the Affero GPL, but Affero has
+released a new version of the Affero GPL which permits relicensing under
+this license.
+
+  The precise terms and conditions for copying, distribution and
+modification follow.
+
+                       TERMS AND CONDITIONS
+
+  0. Definitions.
+
+  "This License" refers to version 3 of the GNU Affero General Public License.
+
+  "Copyright" also means copyright-like laws that apply to other kinds of
+works, such as semiconductor masks.
+
+  "The Program" refers to any copyrightable work licensed under this
+License.  Each licensee is addressed as "you".  "Licensees" and
+"recipients" may be individuals or organizations.
+
+  To "modify" a work means to copy from or adapt all or part of the work
+in a fashion requiring copyright permission, other than the making of an
+exact copy.  The resulting work is called a "modified version" of the
+earlier work or a work "based on" the earlier work.
+
+  A "covered work" means either the unmodified Program or a work based
+on the Program.
+
+  To "propagate" a work means to do anything with it that, without
+permission, would make you directly or secondarily liable for
+infringement under applicable copyright law, except executing it on a
+computer or modifying a private copy.  Propagation includes copying,
+distribution (with or without modification), making available to the
+public, and in some countries other activities as well.
+
+  To "convey" a work means any kind of propagation that enables other
+parties to make or receive copies.  Mere interaction with a user through
+a computer network, with no transfer of a copy, is not conveying.
+
+  An interactive user interface displays "Appropriate Legal Notices"
+to the extent that it includes a convenient and prominently visible
+feature that (1) displays an appropriate copyright notice, and (2)
+tells the user that there is no warranty for the work (except to the
+extent that warranties are provided), that licensees may convey the
+work under this License, and how to view a copy of this License.  If
+the interface presents a list of user commands or options, such as a
+menu, a prominent item in the list meets this criterion.
+
+  1. Source Code.
+
+  The "source code" for a work means the preferred form of the work
+for making modifications to it.  "Object code" means any non-source
+form of a work.
+
+  A "Standard Interface" means an interface that either is an official
+standard defined by a recognized standards body, or, in the case of
+interfaces specified for a particular programming language, one that
+is widely used among developers working in that language.
+
+  The "System Libraries" of an executable work include anything, other
+than the work as a whole, that (a) is included in the normal form of
+packaging a Major Component, but which is not part of that Major
+Component, and (b) serves only to enable use of the work with that
+Major Component, or to implement a Standard Interface for which an
+implementation is available to the public in source code form.  A
+"Major Component", in this context, means a major essential component
+(kernel, window system, and so on) of the specific operating system
+(if any) on which the executable work runs, or a compiler used to
+produce the work, or an object code interpreter used to run it.
+
+  The "Corresponding Source" for a work in object code form means all
+the source code needed to generate, install, and (for an executable
+work) run the object code and to modify the work, including scripts to
+control those activities.  However, it does not include the work's
+System Libraries, or general-purpose tools or generally available free
+programs which are used unmodified in performing those activities but
+which are not part of the work.  For example, Corresponding Source
+includes interface definition files associated with source files for
+the work, and the source code for shared libraries and dynamically
+linked subprograms that the work is specifically designed to require,
+such as by intimate data communication or control flow between those
+subprograms and other parts of the work.
+
+  The Corresponding Source need not include anything that users
+can regenerate automatically from other parts of the Corresponding
+Source.
+
+  The Corresponding Source for a work in source code form is that
+same work.
+
+  2. Basic Permissions.
+
+  All rights granted under this License are granted for the term of
+copyright on the Program, and are irrevocable provided the stated
+conditions are met.  This License explicitly affirms your unlimited
+permission to run the unmodified Program.  The output from running a
+covered work is covered by this License only if the output, given its
+content, constitutes a covered work.  This License acknowledges your
+rights of fair use or other equivalent, as provided by copyright law.
+
+  You may make, run and propagate covered works that you do not
+convey, without conditions so long as your license otherwise remains
+in force.  You may convey covered works to others for the sole purpose
+of having them make modifications exclusively for you, or provide you
+with facilities for running those works, provided that you comply with
+the terms of this License in conveying all material for which you do
+not control copyright.  Those thus making or running the covered works
+for you must do so exclusively on your behalf, under your direction
+and control, on terms that prohibit them from making any copies of
+your copyrighted material outside their relationship with you.
+
+  Conveying under any other circumstances is permitted solely under
+the conditions stated below.  Sublicensing is not allowed; section 10
+makes it unnecessary.
+
+  3. Protecting Users' Legal Rights From Anti-Circumvention Law.
+
+  No covered work shall be deemed part of an effective technological
+measure under any applicable law fulfilling obligations under article
+11 of the WIPO copyright treaty adopted on 20 December 1996, or
+similar laws prohibiting or restricting circumvention of such
+measures.
+
+  When you convey a covered work, you waive any legal power to forbid
+circumvention of technological measures to the extent such circumvention
+is effected by exercising rights under this License with respect to
+the covered work, and you disclaim any intention to limit operation or
+modification of the work as a means of enforcing, against the work's
+users, your or third parties' legal rights to forbid circumvention of
+technological measures.
+
+  4. Conveying Verbatim Copies.
+
+  You may convey verbatim copies of the Program's source code as you
+receive it, in any medium, provided that you conspicuously and
+appropriately publish on each copy an appropriate copyright notice;
+keep intact all notices stating that this License and any
+non-permissive terms added in accord with section 7 apply to the code;
+keep intact all notices of the absence of any warranty; and give all
+recipients a copy of this License along with the Program.
+
+  You may charge any price or no price for each copy that you convey,
+and you may offer support or warranty protection for a fee.
+
+  5. Conveying Modified Source Versions.
+
+  You may convey a work based on the Program, or the modifications to
+produce it from the Program, in the form of source code under the
+terms of section 4, provided that you also meet all of these conditions:
+
+    a) The work must carry prominent notices stating that you modified
+    it, and giving a relevant date.
+
+    b) The work must carry prominent notices stating that it is
+    released under this License and any conditions added under section
+    7.  This requirement modifies the requirement in section 4 to
+    "keep intact all notices".
+
+    c) You must license the entire work, as a whole, under this
+    License to anyone who comes into possession of a copy.  This
+    License will therefore apply, along with any applicable section 7
+    additional terms, to the whole of the work, and all its parts,
+    regardless of how they are packaged.  This License gives no
+    permission to license the work in any other way, but it does not
+    invalidate such permission if you have separately received it.
+
+    d) If the work has interactive user interfaces, each must display
+    Appropriate Legal Notices; however, if the Program has interactive
+    interfaces that do not display Appropriate Legal Notices, your
+    work need not make them do so.
+
+  A compilation of a covered work with other separate and independent
+works, which are not by their nature extensions of the covered work,
+and which are not combined with it such as to form a larger program,
+in or on a volume of a storage or distribution medium, is called an
+"aggregate" if the compilation and its resulting copyright are not
+used to limit the access or legal rights of the compilation's users
+beyond what the individual works permit.  Inclusion of a covered work
+in an aggregate does not cause this License to apply to the other
+parts of the aggregate.
+
+  6. Conveying Non-Source Forms.
+
+  You may convey a covered work in object code form under the terms
+of sections 4 and 5, provided that you also convey the
+machine-readable Corresponding Source under the terms of this License,
+in one of these ways:
+
+    a) Convey the object code in, or embodied in, a physical product
+    (including a physical distribution medium), accompanied by the
+    Corresponding Source fixed on a durable physical medium
+    customarily used for software interchange.
+
+    b) Convey the object code in, or embodied in, a physical product
+    (including a physical distribution medium), accompanied by a
+    written offer, valid for at least three years and valid for as
+    long as you offer spare parts or customer support for that product
+    model, to give anyone who possesses the object code either (1) a
+    copy of the Corresponding Source for all the software in the
+    product that is covered by this License, on a durable physical
+    medium customarily used for software interchange, for a price no
+    more than your reasonable cost of physically performing this
+    conveying of source, or (2) access to copy the
+    Corresponding Source from a network server at no charge.
+
+    c) Convey individual copies of the object code with a copy of the
+    written offer to provide the Corresponding Source.  This
+    alternative is allowed only occasionally and noncommercially, and
+    only if you received the object code with such an offer, in accord
+    with subsection 6b.
+
+    d) Convey the object code by offering access from a designated
+    place (gratis or for a charge), and offer equivalent access to the
+    Corresponding Source in the same way through the same place at no
+    further charge.  You need not require recipients to copy the
+    Corresponding Source along with the object code.  If the place to
+    copy the object code is a network server, the Corresponding Source
+    may be on a different server (operated by you or a third party)
+    that supports equivalent copying facilities, provided you maintain
+    clear directions next to the object code saying where to find the
+    Corresponding Source.  Regardless of what server hosts the
+    Corresponding Source, you remain obligated to ensure that it is
+    available for as long as needed to satisfy these requirements.
+
+    e) Convey the object code using peer-to-peer transmission, provided
+    you inform other peers where the object code and Corresponding
+    Source of the work are being offered to the general public at no
+    charge under subsection 6d.
+
+  A separable portion of the object code, whose source code is excluded
+from the Corresponding Source as a System Library, need not be
+included in conveying the object code work.
+
+  A "User Product" is either (1) a "consumer product", which means any
+tangible personal property which is normally used for personal, family,
+or household purposes, or (2) anything designed or sold for incorporation
+into a dwelling.  In determining whether a product is a consumer product,
+doubtful cases shall be resolved in favor of coverage.  For a particular
+product received by a particular user, "normally used" refers to a
+typical or common use of that class of product, regardless of the status
+of the particular user or of the way in which the particular user
+actually uses, or expects or is expected to use, the product.  A product
+is a consumer product regardless of whether the product has substantial
+commercial, industrial or non-consumer uses, unless such uses represent
+the only significant mode of use of the product.
+
+  "Installation Information" for a User Product means any methods,
+procedures, authorization keys, or other information required to install
+and execute modified versions of a covered work in that User Product from
+a modified version of its Corresponding Source.  The information must
+suffice to ensure that the continued functioning of the modified object
+code is in no case prevented or interfered with solely because
+modification has been made.
+
+  If you convey an object code work under this section in, or with, or
+specifically for use in, a User Product, and the conveying occurs as
+part of a transaction in which the right of possession and use of the
+User Product is transferred to the recipient in perpetuity or for a
+fixed term (regardless of how the transaction is characterized), the
+Corresponding Source conveyed under this section must be accompanied
+by the Installation Information.  But this requirement does not apply
+if neither you nor any third party retains the ability to install
+modified object code on the User Product (for example, the work has
+been installed in ROM).
+
+  The requirement to provide Installation Information does not include a
+requirement to continue to provide support service, warranty, or updates
+for a work that has been modified or installed by the recipient, or for
+the User Product in which it has been modified or installed.  Access to a
+network may be denied when the modification itself materially and
+adversely affects the operation of the network or violates the rules and
+protocols for communication across the network.
+
+  Corresponding Source conveyed, and Installation Information provided,
+in accord with this section must be in a format that is publicly
+documented (and with an implementation available to the public in
+source code form), and must require no special password or key for
+unpacking, reading or copying.
+
+  7. Additional Terms.
+
+  "Additional permissions" are terms that supplement the terms of this
+License by making exceptions from one or more of its conditions.
+Additional permissions that are applicable to the entire Program shall
+be treated as though they were included in this License, to the extent
+that they are valid under applicable law.  If additional permissions
+apply only to part of the Program, that part may be used separately
+under those permissions, but the entire Program remains governed by
+this License without regard to the additional permissions.
+
+  When you convey a copy of a covered work, you may at your option
+remove any additional permissions from that copy, or from any part of
+it.  (Additional permissions may be written to require their own
+removal in certain cases when you modify the work.)  You may place
+additional permissions on material, added by you to a covered work,
+for which you have or can give appropriate copyright permission.
+
+  Notwithstanding any other provision of this License, for material you
+add to a covered work, you may (if authorized by the copyright holders of
+that material) supplement the terms of this License with terms:
+
+    a) Disclaiming warranty or limiting liability differently from the
+    terms of sections 15 and 16 of this License; or
+
+    b) Requiring preservation of specified reasonable legal notices or
+    author attributions in that material or in the Appropriate Legal
+    Notices displayed by works containing it; or
+
+    c) Prohibiting misrepresentation of the origin of that material, or
+    requiring that modified versions of such material be marked in
+    reasonable ways as different from the original version; or
+
+    d) Limiting the use for publicity purposes of names of licensors or
+    authors of the material; or
+
+    e) Declining to grant rights under trademark law for use of some
+    trade names, trademarks, or service marks; or
+
+    f) Requiring indemnification of licensors and authors of that
+    material by anyone who conveys the material (or modified versions of
+    it) with contractual assumptions of liability to the recipient, for
+    any liability that these contractual assumptions directly impose on
+    those licensors and authors.
+
+  All other non-permissive additional terms are considered "further
+restrictions" within the meaning of section 10.  If the Program as you
+received it, or any part of it, contains a notice stating that it is
+governed by this License along with a term that is a further
+restriction, you may remove that term.  If a license document contains
+a further restriction but permits relicensing or conveying under this
+License, you may add to a covered work material governed by the terms
+of that license document, provided that the further restriction does
+not survive such relicensing or conveying.
+
+  If you add terms to a covered work in accord with this section, you
+must place, in the relevant source files, a statement of the
+additional terms that apply to those files, or a notice indicating
+where to find the applicable terms.
+
+  Additional terms, permissive or non-permissive, may be stated in the
+form of a separately written license, or stated as exceptions;
+the above requirements apply either way.
+
+  8. Termination.
+
+  You may not propagate or modify a covered work except as expressly
+provided under this License.  Any attempt otherwise to propagate or
+modify it is void, and will automatically terminate your rights under
+this License (including any patent licenses granted under the third
+paragraph of section 11).
+
+  However, if you cease all violation of this License, then your
+license from a particular copyright holder is reinstated (a)
+provisionally, unless and until the copyright holder explicitly and
+finally terminates your license, and (b) permanently, if the copyright
+holder fails to notify you of the violation by some reasonable means
+prior to 60 days after the cessation.
+
+  Moreover, your license from a particular copyright holder is
+reinstated permanently if the copyright holder notifies you of the
+violation by some reasonable means, this is the first time you have
+received notice of violation of this License (for any work) from that
+copyright holder, and you cure the violation prior to 30 days after
+your receipt of the notice.
+
+  Termination of your rights under this section does not terminate the
+licenses of parties who have received copies or rights from you under
+this License.  If your rights have been terminated and not permanently
+reinstated, you do not qualify to receive new licenses for the same
+material under section 10.
+
+  9. Acceptance Not Required for Having Copies.
+
+  You are not required to accept this License in order to receive or
+run a copy of the Program.  Ancillary propagation of a covered work
+occurring solely as a consequence of using peer-to-peer transmission
+to receive a copy likewise does not require acceptance.  However,
+nothing other than this License grants you permission to propagate or
+modify any covered work.  These actions infringe copyright if you do
+not accept this License.  Therefore, by modifying or propagating a
+covered work, you indicate your acceptance of this License to do so.
+
+  10. Automatic Licensing of Downstream Recipients.
+
+  Each time you convey a covered work, the recipient automatically
+receives a license from the original licensors, to run, modify and
+propagate that work, subject to this License.  You are not responsible
+for enforcing compliance by third parties with this License.
+
+  An "entity transaction" is a transaction transferring control of an
+organization, or substantially all assets of one, or subdividing an
+organization, or merging organizations.  If propagation of a covered
+work results from an entity transaction, each party to that
+transaction who receives a copy of the work also receives whatever
+licenses to the work the party's predecessor in interest had or could
+give under the previous paragraph, plus a right to possession of the
+Corresponding Source of the work from the predecessor in interest, if
+the predecessor has it or can get it with reasonable efforts.
+
+  You may not impose any further restrictions on the exercise of the
+rights granted or affirmed under this License.  For example, you may
+not impose a license fee, royalty, or other charge for exercise of
+rights granted under this License, and you may not initiate litigation
+(including a cross-claim or counterclaim in a lawsuit) alleging that
+any patent claim is infringed by making, using, selling, offering for
+sale, or importing the Program or any portion of it.
+
+  11. Patents.
+
+  A "contributor" is a copyright holder who authorizes use under this
+License of the Program or a work on which the Program is based.  The
+work thus licensed is called the contributor's "contributor version".
+
+  A contributor's "essential patent claims" are all patent claims
+owned or controlled by the contributor, whether already acquired or
+hereafter acquired, that would be infringed by some manner, permitted
+by this License, of making, using, or selling its contributor version,
+but do not include claims that would be infringed only as a
+consequence of further modification of the contributor version.  For
+purposes of this definition, "control" includes the right to grant
+patent sublicenses in a manner consistent with the requirements of
+this License.
+
+  Each contributor grants you a non-exclusive, worldwide, royalty-free
+patent license under the contributor's essential patent claims, to
+make, use, sell, offer for sale, import and otherwise run, modify and
+propagate the contents of its contributor version.
+
+  In the following three paragraphs, a "patent license" is any express
+agreement or commitment, however denominated, not to enforce a patent
+(such as an express permission to practice a patent or covenant not to
+sue for patent infringement).  To "grant" such a patent license to a
+party means to make such an agreement or commitment not to enforce a
+patent against the party.
+
+  If you convey a covered work, knowingly relying on a patent license,
+and the Corresponding Source of the work is not available for anyone
+to copy, free of charge and under the terms of this License, through a
+publicly available network server or other readily accessible means,
+then you must either (1) cause the Corresponding Source to be so
+available, or (2) arrange to deprive yourself of the benefit of the
+patent license for this particular work, or (3) arrange, in a manner
+consistent with the requirements of this License, to extend the patent
+license to downstream recipients.  "Knowingly relying" means you have
+actual knowledge that, but for the patent license, your conveying the
+covered work in a country, or your recipient's use of the covered work
+in a country, would infringe one or more identifiable patents in that
+country that you have reason to believe are valid.
+
+  If, pursuant to or in connection with a single transaction or
+arrangement, you convey, or propagate by procuring conveyance of, a
+covered work, and grant a patent license to some of the parties
+receiving the covered work authorizing them to use, propagate, modify
+or convey a specific copy of the covered work, then the patent license
+you grant is automatically extended to all recipients of the covered
+work and works based on it.
+
+  A patent license is "discriminatory" if it does not include within
+the scope of its coverage, prohibits the exercise of, or is
+conditioned on the non-exercise of one or more of the rights that are
+specifically granted under this License.  You may not convey a covered
+work if you are a party to an arrangement with a third party that is
+in the business of distributing software, under which you make payment
+to the third party based on the extent of your activity of conveying
+the work, and under which the third party grants, to any of the
+parties who would receive the covered work from you, a discriminatory
+patent license (a) in connection with copies of the covered work
+conveyed by you (or copies made from those copies), or (b) primarily
+for and in connection with specific products or compilations that
+contain the covered work, unless you entered into that arrangement,
+or that patent license was granted, prior to 28 March 2007.
+
+  Nothing in this License shall be construed as excluding or limiting
+any implied license or other defenses to infringement that may
+otherwise be available to you under applicable patent law.
+
+  12. No Surrender of Others' Freedom.
+
+  If conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License.  If you cannot convey a
+covered work so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you may
+not convey it at all.  For example, if you agree to terms that obligate you
+to collect a royalty for further conveying from those to whom you convey
+the Program, the only way you could satisfy both those terms and this
+License would be to refrain entirely from conveying the Program.
+
+  13. Remote Network Interaction; Use with the GNU General Public License.
+
+  Notwithstanding any other provision of this License, if you modify the
+Program, your modified version must prominently offer all users
+interacting with it remotely through a computer network (if your version
+supports such interaction) an opportunity to receive the Corresponding
+Source of your version by providing access to the Corresponding Source
+from a network server at no charge, through some standard or customary
+means of facilitating copying of software.  This Corresponding Source
+shall include the Corresponding Source for any work covered by version 3
+of the GNU General Public License that is incorporated pursuant to the
+following paragraph.
+
+  Notwithstanding any other provision of this License, you have
+permission to link or combine any covered work with a work licensed
+under version 3 of the GNU General Public License into a single
+combined work, and to convey the resulting work.  The terms of this
+License will continue to apply to the part which is the covered work,
+but the work with which it is combined will remain governed by version
+3 of the GNU General Public License.
+
+  14. Revised Versions of this License.
+
+  The Free Software Foundation may publish revised and/or new versions of
+the GNU Affero General Public License from time to time.  Such new versions
+will be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+  Each version is given a distinguishing version number.  If the
+Program specifies that a certain numbered version of the GNU Affero General
+Public License "or any later version" applies to it, you have the
+option of following the terms and conditions either of that numbered
+version or of any later version published by the Free Software
+Foundation.  If the Program does not specify a version number of the
+GNU Affero General Public License, you may choose any version ever published
+by the Free Software Foundation.
+
+  If the Program specifies that a proxy can decide which future
+versions of the GNU Affero General Public License can be used, that proxy's
+public statement of acceptance of a version permanently authorizes you
+to choose that version for the Program.
+
+  Later license versions may give you additional or different
+permissions.  However, no additional obligations are imposed on any
+author or copyright holder as a result of your choosing to follow a
+later version.
+
+  15. Disclaimer of Warranty.
+
+  THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY
+APPLICABLE LAW.  EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
+HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY
+OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
+THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+PURPOSE.  THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM
+IS WITH YOU.  SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF
+ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
+
+  16. Limitation of Liability.
+
+  IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS
+THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY
+GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE
+USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF
+DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
+PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),
+EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF
+SUCH DAMAGES.
+
+  17. Interpretation of Sections 15 and 16.
+
+  If the disclaimer of warranty and limitation of liability provided
+above cannot be given local legal effect according to their terms,
+reviewing courts shall apply local law that most closely approximates
+an absolute waiver of all civil liability in connection with the
+Program, unless a warranty or assumption of liability accompanies a
+copy of the Program in return for a fee.
+
+                     END OF TERMS AND CONDITIONS
+
+            How to Apply These Terms to Your New Programs
+
+  If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+  To do so, attach the following notices to the program.  It is safest
+to attach them to the start of each source file to most effectively
+state the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+    <one line to give the program's name and a brief idea of what it does.>
+    Copyright (C) <year>  <name of author>
+
+    This program is free software: you can redistribute it and/or modify
+    it under the terms of the GNU Affero General Public License as published by
+    the Free Software Foundation, either version 3 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU Affero General Public License for more details.
+
+    You should have received a copy of the GNU Affero General Public License
+    along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+Also add information on how to contact you by electronic and paper mail.
+
+  If your software can interact with users remotely through a computer
+network, you should also make sure that it provides a way for users to
+get its source.  For example, if your program is a web application, its
+interface could display a "Source" link that leads users to an archive
+of the code.  There are many ways you could offer source, and different
+solutions will be better for different programs; see section 13 for the
+specific requirements.
+
+  You should also get your employer (if you work as a programmer) or school,
+if any, to sign a "copyright disclaimer" for the program, if necessary.
+For more information on this, and how to apply and follow the GNU AGPL, see
+<http://www.gnu.org/licenses/>.

README.md

@@ -1,4 +1,11 @@
 # HamShield
+
+Use the HS04 branch for old (pre -09) versions of the hardware.
+
 HamShield Arduino Library and Example Sketches
 
 This repository is meant to be checked out into your Arduino application's libraries folder. After reloading the application, the library and example sketches should be available for use.
+
+For overview, help, tricks, tips, and more, check out the wiki: 
+
+https://github.com/EnhancedRadioDevices/HamShield/wiki

SimpleFIFO.h

@@ -0,0 +1,89 @@
+#ifndef SimpleFIFO_h
+#define SimpleFIFO_h
+/*
+||
+|| @file 		SimpleFIFO.h
+|| @version 	1.2
+|| @author 	Alexander Brevig
+|| @contact 	alexanderbrevig@gmail.com
+||
+|| @description
+|| | A simple FIFO class, mostly for primitive types but can be used with classes if assignment to int is allowed
+|| | This FIFO is not dynamic, so be sure to choose an appropriate size for it
+|| #
+||
+|| @license
+|| | Copyright (c) 2010 Alexander Brevig
+|| | This library is free software; you can redistribute it and/or
+|| | modify it under the terms of the GNU Lesser General Public
+|| | License as published by the Free Software Foundation; version
+|| | 2.1 of the License.
+|| |
+|| | This library is distributed in the hope that it will be useful,
+|| | but WITHOUT ANY WARRANTY; without even the implied warranty of
+|| | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+|| | Lesser General Public License for more details.
+|| |
+|| | You should have received a copy of the GNU Lesser General Public
+|| | License along with this library; if not, write to the Free Software
+|| | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+|| #
+||
+*/
+template<typename T, int rawSize>
+class SimpleFIFO {
+public:
+	const int size;				//speculative feature, in case it's needed
+
+	SimpleFIFO();
+
+	T dequeue();				//get next element
+	bool enqueue( T element );	//add an element
+	T peek() const;				//get the next element without releasing it from the FIFO
+	void flush();				//[1.1] reset to default state 
+
+	//how many elements are currently in the FIFO?
+	unsigned char count() { return numberOfElements; }
+
+private:
+#ifndef SimpleFIFO_NONVOLATILE
+	volatile unsigned char numberOfElements;
+	volatile unsigned char nextIn;
+	volatile unsigned char nextOut;
+	volatile T raw[rawSize];
+#else
+	unsigned char numberOfElements;
+	unsigned char nextIn;
+	unsigned char nextOut;
+	T raw[rawSize];
+#endif
+};
+
+template<typename T, int rawSize>
+SimpleFIFO<T,rawSize>::SimpleFIFO() : size(rawSize) {
+	flush();
+}
+template<typename T, int rawSize>
+bool SimpleFIFO<T,rawSize>::enqueue( T element ) {
+	if ( count() >= rawSize ) { return false; }
+	numberOfElements++;
+	nextIn %= size;
+	raw[nextIn] = element;
+	nextIn++; //advance to next index
+	return true;
+}
+template<typename T, int rawSize>
+T SimpleFIFO<T,rawSize>::dequeue() {
+	numberOfElements--;
+	nextOut %= size;
+	return raw[ nextOut++];
+}
+template<typename T, int rawSize>
+T SimpleFIFO<T,rawSize>::peek() const {
+	return raw[ nextOut % size];
+}
+template<typename T, int rawSize>
+void SimpleFIFO<T,rawSize>::flush() {
+	nextIn = nextOut = numberOfElements = 0;
+}
+#endif

examples/AFSK-PacketTester/AFSK-PacketTester.ino

@@ -0,0 +1,136 @@
+/* Serial glue to send messages over APRS 
+ *  
+ *  To do: add message receive code
+ *  
+ */
+
+
+#define DDS_REFCLK_DEFAULT 9600
+
+#include <HamShield.h>
+#include <Wire.h>
+#include <avr/wdt.h> 
+
+//TODO: move these into library
+#define PWM_PIN 3
+#define RESET_PIN A3
+#define SWITCH_PIN 2
+
+
+HamShield radio;
+DDS dds;
+String messagebuff = "";
+String origin_call = "";
+String destination_call = "";
+String textmessage = "";
+int msgptr = 0;
+
+void setup() {
+  // NOTE: if not using PWM out, it should be held low to avoid tx noise
+  pinMode(PWM_PIN, OUTPUT);
+  digitalWrite(PWM_PIN, LOW);
+  
+  // prep the switch
+  pinMode(SWITCH_PIN, INPUT_PULLUP);
+  
+  // set up the reset control pin
+  pinMode(RESET_PIN, OUTPUT);
+  // turn on pwr to the radio
+  digitalWrite(RESET_PIN, HIGH);
+  
+  Serial.begin(115200);
+  Wire.begin();
+
+  
+  radio.initialize();
+  radio.frequency(144390);
+  radio.setRfPower(0);
+  dds.start();
+  radio.afsk.start(&dds);
+  delay(100);
+  Serial.println("HELLO");
+}
+
+String temp[1] = "";
+
+
+void loop() {
+  messagebuff = "KC7IBT,KC7IBT,:HAMSHIELD TEST";
+  prepMessage();
+  delay(10000);
+}
+    
+
+void prepMessage() { 
+   radio.setModeTransmit();
+   delay(500);
+   origin_call = messagebuff.substring(0,messagebuff.indexOf(','));                                          // get originating callsign
+   destination_call = messagebuff.substring(messagebuff.indexOf(',')+1,messagebuff.indexOf(',',messagebuff.indexOf(',')+1)); // get the destination call
+   textmessage = messagebuff.substring(messagebuff.indexOf(":")+1);
+   
+   Serial.print("From: "); Serial.print(origin_call); Serial.print(" To: "); Serial.println(destination_call); Serial.println("Text: "); Serial.println(textmessage);
+
+    AFSK::Packet *packet = AFSK::PacketBuffer::makePacket(22 + 32);
+
+    packet->start();
+    packet->appendCallsign(origin_call.c_str(),0);
+    packet->appendCallsign(destination_call.c_str(),15,true);   
+    packet->appendFCS(0x03);
+    packet->appendFCS(0xf0);
+    packet->print(textmessage);
+    packet->finish();
+ 
+    
+    bool ret = radio.afsk.putTXPacket(packet);
+
+    if(radio.afsk.txReady()) {
+      Serial.println(F("txReady"));
+      radio.setModeTransmit();
+      //delay(100);
+      if(radio.afsk.txStart()) {
+        Serial.println(F("txStart"));
+      } else {
+        radio.setModeReceive();
+      }
+    }
+    // Wait 2 seconds before we send our beacon again.
+    Serial.println("tick");
+    // Wait up to 2.5 seconds to finish sending, and stop transmitter.
+    // TODO: This is hackery.
+    for(int i = 0; i < 500; i++) {
+      if(radio.afsk.encoder.isDone())
+         break;
+      delay(50);
+    }
+    Serial.println("Done sending");
+    delay(3000);
+    radio.setModeReceive();
+} 
+ 
+ 
+ISR(TIMER2_OVF_vect) {
+  TIFR2 = _BV(TOV2);
+  static uint8_t tcnt = 0;
+  if(++tcnt == 8) {
+  digitalWrite(2, HIGH);
+  dds.clockTick();
+  digitalWrite(2, LOW);
+    tcnt = 0;
+  }
+}
+
+ISR(ADC_vect) {
+  static uint8_t tcnt = 0;
+  TIFR1 = _BV(ICF1); // Clear the timer flag
+  PORTD |= _BV(2); // Diagnostic pin (D2)
+  dds.clockTick();
+  if(++tcnt == 1) {
+    if(radio.afsk.encoder.isSending()) {
+      radio.afsk.timer();
+    }
+    tcnt = 0;
+  }
+  PORTD &= ~(_BV(2)); // Pin D2 off again
+}
+
+

examples/AFSK-SerialMessenger/AFSK-SerialMessenger.ino

@@ -0,0 +1,140 @@
+/* Serial glue to send messages over APRS 
+ *  
+ *  To do: add message receive code
+ *  
+ */
+
+
+#define DDS_REFCLK_DEFAULT 9600
+
+#include <HamShield.h>
+#include <Wire.h>
+#include <avr/wdt.h> 
+
+#define PWM_PIN 3
+#define RESET_PIN A3
+#define SWITCH_PIN 2
+
+HamShield radio;
+DDS dds;
+String messagebuff = "";
+String origin_call = "";
+String destination_call = "";
+String textmessage = "";
+int msgptr = 0;
+
+void setup() {
+  // NOTE: if not using PWM out, it should be held low to avoid tx noise
+  pinMode(PWM_PIN, OUTPUT);
+  digitalWrite(PWM_PIN, LOW);
+  
+  // prep the switch
+  pinMode(SWITCH_PIN, INPUT_PULLUP);
+  
+  // set up the reset control pin
+  pinMode(RESET_PIN, OUTPUT);
+  // turn on the radio
+  digitalWrite(RESET_PIN, HIGH);
+  
+  Serial.begin(115200);
+  Wire.begin();
+  radio.initialize();
+  radio.frequency(145570);
+  radio.setRfPower(0);
+  dds.start();
+  radio.afsk.start(&dds);
+  delay(100);
+  Serial.println("HELLO");
+}
+
+String temp[1] = "";
+
+
+void loop() {
+    if(Serial.available()) { 
+      char temp = (char)Serial.read();
+      if(temp == '`') { 
+       prepMessage(); msgptr = 0; Serial.print("!!"); } 
+      else { 
+        messagebuff += temp;
+        msgptr++;
+      }
+    }
+    if(msgptr > 254) { messagebuff = ""; Serial.print("X!"); } 
+}
+    
+
+void prepMessage() { 
+   radio.setModeTransmit();
+   delay(500);
+   origin_call = messagebuff.substring(0,messagebuff.indexOf(','));        // get originating callsign
+   destination_call = messagebuff.substring(messagebuff.indexOf(',')+1,
+              messagebuff.indexOf(',',messagebuff.indexOf(',')+1)); // get the destination call
+   textmessage = messagebuff.substring(messagebuff.indexOf(":"));
+  
+    AFSK::Packet *packet = AFSK::PacketBuffer::makePacket(22 + 32);
+
+    packet->start();
+    packet->appendCallsign(origin_call.c_str(),0);
+    packet->appendCallsign(destination_call.c_str(),15,true);   
+    packet->appendFCS(0x03);
+    packet->appendFCS(0xf0);
+    packet->print(textmessage);
+    packet->finish();
+
+    textmessage = "";
+    
+    bool ret = radio.afsk.putTXPacket(packet);
+
+    if(radio.afsk.txReady()) {
+      Serial.println(F("txReady"));
+      //radio.setModeTransmit();
+      //delay(100);
+      if(radio.afsk.txStart()) {
+        Serial.println(F("txStart"));
+      } else {
+        radio.setModeReceive();
+      }
+    }
+    // Wait 2 seconds before we send our beacon again.
+    Serial.println("tick");
+    // Wait up to 2.5 seconds to finish sending, and stop transmitter.
+    // TODO: This is hackery.
+    for(int i = 0; i < 500; i++) {
+      if(radio.afsk.encoder.isDone())
+         break;
+      delay(50);
+    }
+    Serial.println("Done sending");
+    delay(3000);
+    radio.setModeReceive();
+} 
+ 
+
+// TODO: d2 is now our switch, so don't write to that
+ISR(TIMER2_OVF_vect) {
+  TIFR2 = _BV(TOV2);
+  static uint8_t tcnt = 0;
+  if(++tcnt == 8) {
+  //digitalWrite(2, HIGH);
+  dds.clockTick();
+  //digitalWrite(2, LOW);
+    tcnt = 0;
+  }
+}
+
+ISR(ADC_vect) {
+  static uint8_t tcnt = 0;
+  TIFR1 = _BV(ICF1); // Clear the timer flag
+  //PORTD |= _BV(2); // Diagnostic pin (D2)
+  dds.clockTick();
+  if(++tcnt == 1) {
+    if(radio.afsk.encoder.isSending()) {
+      radio.afsk.timer();
+    }
+    tcnt = 0;
+  }
+  //PORTD &= ~(_BV(2)); // Pin D2 off again
+}
+
+

examples/AFSKSend/AFSKSend.ino

@@ -0,0 +1,106 @@
+#include <HamShield.h>
+#include <Wire.h>
+
+HamShield radio;
+DDS dds;
+
+#define PWM_PIN 3
+#define RESET_PIN A3
+#define SWITCH_PIN 2
+
+#define DON(p) PORTD |= _BV((p))
+#define DOFF(p) PORTD &= ~(_BV((p)))
+
+void setup() {
+  Serial.begin(9600);
+  Wire.begin();
+  pinMode(4, OUTPUT);
+  pinMode(5, OUTPUT);
+  pinMode(6, OUTPUT);
+  pinMode(7, OUTPUT);
+  
+    // NOTE: if not using PWM out, it should be held low to avoid tx noise
+  pinMode(PWM_PIN, OUTPUT);
+  digitalWrite(PWM_PIN, LOW);
+  
+  // prep the switch
+  pinMode(SWITCH_PIN, INPUT_PULLUP);
+  
+  // set up the reset control pin
+  pinMode(RESET_PIN, OUTPUT);
+  // turn on pwr to the radio
+  digitalWrite(RESET_PIN, HIGH);
+  
+  Serial.println(F("Radio test connection"));
+  Serial.println(radio.testConnection(), DEC);
+  Serial.println(F("Initialize"));
+  delay(100);
+  radio.initialize();
+  Serial.println(F("Frequency"));
+  delay(100);
+  radio.frequency(145010);
+  //radio.setRfPower(0);
+  delay(100);
+  dds.start();
+  delay(100);
+  radio.afsk.start(&dds);
+  delay(100);
+  dds.setFrequency(0);
+  dds.on();
+  dds.setAmplitude(255);
+  I2Cdev::writeWord(A1846S_DEV_ADDR_SENLOW, 0x44, 0b0000011111111111);
+  //I2Cdev::writeWord(A1846S_DEV_ADDR_SENLOW, 0x53, 0x0);
+  //I2Cdev::writeWord(A1846S_DEV_ADDR_SENLOW, 0x32, 0xffff);
+}
+
+void loop() {
+  DON(6);
+    AFSK::Packet *packet = AFSK::PacketBuffer::makePacket(22 + 32);
+    packet->start();
+    packet->appendCallsign("VE6SLP",0);
+    packet->appendCallsign("VA6GA",15,true);
+    packet->appendFCS(0x03);
+    packet->appendFCS(0xf0);
+    packet->print(F("Hello "));
+    packet->print(millis());
+    packet->println(F("\r\nThis is a test of the HamShield Kickstarter prototype. de VE6SLP"));
+    packet->finish();
+    
+    bool ret = radio.afsk.putTXPacket(packet);
+
+    if(radio.afsk.txReady()) {
+      Serial.println(F("txReady"));
+      radio.setModeTransmit();
+      if(radio.afsk.txStart()) {
+        Serial.println(F("txStart"));
+      } else {
+        Serial.println(F("Tx Start failure"));
+        radio.setModeReceive();
+      }
+    }
+    // Wait 2 seconds before we send our beacon again.
+    Serial.println("tick");
+    // Wait up to 2.5 seconds to finish sending, and stop transmitter.
+    // TODO: This is hackery.
+    DOFF(6);
+    for(int i = 0; i < 500; i++) {
+      if(radio.afsk.encoder.isDone())
+         break;
+      delay(50);
+      Serial.println("Not done");
+    }
+    Serial.println("Done sending");
+    delay(100);
+    radio.setModeReceive();
+    delay(2000);
+}
+
+ISR(ADC_vect) {
+  TIFR1 = _BV(ICF1); // Clear the timer flag
+  DON(4);
+  dds.clockTick();
+  DON(5);
+  radio.afsk.timer();
+  DOFF(5);
+  DOFF(4);
+}

examples/APRSMessenger/background.js

@@ -0,0 +1,13 @@
+chrome.app.runtime.onLaunched.addListener(function() {
+  chrome.app.window.create("window.html", {
+    "bounds": {
+        "width": 685,
+        "height": 800
+    }
+    });
+});
+
+  $(function() {
+    $( "#tabs" ).tabs();
+  });
+

examples/APRSMessenger/manifest.json

@@ -0,0 +1,10 @@
+{
+  "name": "HamShield",
+  "description": "HamShield",
+  "version": "1.0.0",
+  "app": {
+    "background": {
+        "scripts": ["background.js"]
+    }
+  }
+ }

examples/APRSMessenger/project.ps

@@ -0,0 +1 @@
+chromeApp

examples/APRSMessenger/styles.css

@@ -0,0 +1,48 @@
+body{
+  display: inline-block;  
+}
+
+.btn {
+  background: #adadad;
+  background-image: -webkit-linear-gradient(top, #adadad, #3d3d3d);
+  background-image: -moz-linear-gradient(top, #adadad, #3d3d3d);
+  background-image: -ms-linear-gradient(top, #adadad, #3d3d3d);
+  background-image: -o-linear-gradient(top, #adadad, #3d3d3d);
+  background-image: linear-gradient(to bottom, #adadad, #3d3d3d);
+  -webkit-border-radius: 0;
+  -moz-border-radius: 0;
+  border-radius: 0px;
+  font-family: Arial;
+  color: #ffffff;
+  font-size: 20px;
+  padding: 10px 20px 10px 20px;
+  text-decoration: none;
+  float: left;
+  text-align:center;
+}
+
+.btn:hover {
+  background: #3d3d3d;
+  text-decoration: none;
+}
+
+.lcd {
+  -webkit-border-radius: 0;
+  -moz-border-radius: 0;
+  border-radius: 0px;
+  font-family: Courier New;
+  color: #00ff00;
+  font-size: 50px;
+  background: #000000;
+  padding: 10px 20px 10px 20px;
+  text-decoration: none;
+  width: 500px;
+}
+
+.lcd:hover {
+  text-decoration: none;
+}
+
+.bs1 { width: 50px; }
+.bs2 { width: 100px; }
+.bs3 { width: 200px; }

examples/APRSMessenger/window.html

@@ -0,0 +1,61 @@
+<!DOCTYPE html>
+<html lang="en">
+  <head>
+    <link rel="stylesheet" type="text/css" href="styles.css">
+  <meta charset="utf-8">
+  <title>APRSMessenger</title>
+  <link rel="stylesheet" href="jquery-ui.css">
+  <script src="jquery-1.10.2.js"></script>
+  <script src="jquery-ui.js"></script>
+</head>
+  <body>
+    <div class="lcd" style="width: 768px">
+       144.390 MHz | APRS | <img src="bars-3.png" style="height: 32px; width: 32px;">
+    </div>
+    <div class="lcd" style="width: 768px; font-size: 15px;">
+      2M | BW: 25KHz | TX CTCSS: OFF | RX CTCSS: OFF | Filter: OFF | Presence: Available 
+    </div>
+    <div class="btn" style="width: 75px">
+       Tune
+    </div>
+    <div class="btn">
+       Presence
+    </div>
+    <div class="btn">
+      GPS
+    </div>
+    <div class="btn">
+      SSTV
+    </div>
+    <div class="btn">
+      WX
+    </div>
+    <div class="btn">
+      MSG
+    </div>
+    <div class="btn">
+      SQ-
+    </div>
+    <div class="btn">
+      SQ+
+    </div>
+    <div class="btn">
+      VOL
+    </div>
+    <br/><br/>
+    <div id="tabs">
+     <ul>
+       <li><a href="#tabs-1">Console</a></li>
+       <li><a href="#tabs-2">KG7OGM</a></li>
+       <li><a href="#tabs-3">KC7IBT</a></li>
+     </ul>
+    </div>
+    <div id="tabs-1">
+      Debug messages
+    </div>
+    <div id="tabs-2">
+    </div>
+    <div id="tabs-3">
+    </div>
+  </body>
+</html>

examples/AX25Receive/AX25Receive.ino

@@ -0,0 +1,78 @@
+#include <HamShield.h>
+#include <Wire.h>
+
+#define PWM_PIN 3
+#define RESET_PIN A3
+#define SWITCH_PIN 2
+
+HamShield radio;
+DDS dds;
+
+void setup() {
+  // NOTE: if not using PWM out, it should be held low to avoid tx noise
+  pinMode(PWM_PIN, OUTPUT);
+  digitalWrite(PWM_PIN, LOW);
+  
+  // prep the switch
+  pinMode(SWITCH_PIN, INPUT_PULLUP);
+  
+  // set up the reset control pin
+  pinMode(RESET_PIN, OUTPUT);
+  // turn on radio
+  digitalWrite(RESET_PIN, HIGH);
+  
+  Serial.begin(9600);
+  Wire.begin();
+  Serial.println(F("Radio test connection"));
+  Serial.println(radio.testConnection(), DEC);
+  Serial.println(F("Initialize"));
+  delay(100);
+  radio.initialize();
+  radio.frequency(145010);
+  radio.setSQOff();
+  I2Cdev::writeWord(A1846S_DEV_ADDR_SENLOW, 0x44, 0b11111111);
+  Serial.println(F("Frequency"));
+  delay(100);
+  Serial.print(F("Squelch(H/L): "));
+  Serial.print(radio.getSQHiThresh());
+  Serial.print(F(" / "));
+  Serial.println(radio.getSQLoThresh());
+  radio.setModeReceive();
+  Serial.print(F("RX? "));
+  Serial.println(radio.getRX());
+  Serial.println(F("DDS Start"));
+  delay(100);
+  dds.start();
+  Serial.println(F("AFSK start"));
+  delay(100);
+  radio.afsk.start(&dds);
+  Serial.println(F("Starting..."));
+  delay(100);
+  dds.setAmplitude(255);
+}
+
+uint32_t last = 0;
+void loop() {
+   if(radio.afsk.decoder.read() || radio.afsk.rxPacketCount()) {
+      // A true return means something was put onto the packet FIFO
+      // If we actually have data packets in the buffer, process them all now
+      while(radio.afsk.rxPacketCount()) {
+        AFSK::Packet *packet = radio.afsk.getRXPacket();
+        Serial.print(F("Packet: "));
+        if(packet) {
+          packet->printPacket(&Serial);
+          AFSK::PacketBuffer::freePacket(packet);
+        }
+      }
+    }
+}
+
+//TODO: d2 is the switch input, so remove this
+ISR(ADC_vect) {
+  static uint8_t tcnt = 0;
+  TIFR1 = _BV(ICF1); // Clear the timer flag
+  //PORTD |= _BV(2); // Diagnostic pin (D2)
+  //dds.clockTick();
+  radio.afsk.timer();
+  //PORTD &= ~(_BV(2)); // Pin D2 off again
+}

examples/CrystalCalibration/CrystalCalibration.ino

@@ -0,0 +1,270 @@
+#define DDS_REFCLK_DEFAULT 38400
+#define DDS_REFCLK_OFFSET  0
+#define DDS_DEBUG_SERIAL
+
+#include <HamShield.h>
+#include <Wire.h>
+
+#define PWM_PIN 3
+#define RESET_PIN A3
+#define SWITCH_PIN 2
+
+HamShield radio;
+DDS dds;
+
+void setup() {
+  // NOTE: if not using PWM out, it should be held low to avoid tx noise
+  pinMode(PWM_PIN, OUTPUT);
+  digitalWrite(PWM_PIN, LOW);
+  
+  // prep the switch
+  pinMode(SWITCH_PIN, INPUT_PULLUP);
+  
+  // set up the reset control pin
+  pinMode(RESET_PIN, OUTPUT);
+  // turn on radio
+  digitalWrite(RESET_PIN, HIGH);
+  
+  Serial.begin(9600);
+  Wire.begin();
+  radio.initialize();
+  radio.setRfPower(0);
+  radio.setFrequency(145050);
+  
+  dds.start();
+  dds.setFrequency(1200);
+  dds.on();
+  
+  radio.bypassPreDeEmph();
+}
+
+enum Sets {
+  SET_REF,
+  SET_TONE,
+  SET_AMPLITUDE,
+  SET_ADC_HALF,
+  SET_OFFSET
+} setting = SET_TONE;
+
+char freqBuffer[8];
+char *freqBufferPtr = freqBuffer;
+uint16_t lastFreq = 1200;
+
+volatile uint16_t recordedPulseLength;
+volatile bool recordedPulse = false;
+volatile bool listening = false;
+volatile uint8_t maxADC = 0, minADC = 255, adcHalf = 40;
+
+void loop() {
+  static uint16_t samples = 0;
+  static uint16_t pulse;
+  static uint32_t lastOutput = 0;
+  static float pulseFloat = 0.0;
+  if(recordedPulse) {
+    uint32_t pulseAveraging;
+    uint16_t tmpPulse;
+    cli();
+    recordedPulse = false;
+    tmpPulse = recordedPulseLength;
+    sei();
+    if(samples++ == 0) {
+      pulse = tmpPulse;
+      //pulseFloat = tmpPulse;
+    } else {
+      pulseAveraging = (pulse + tmpPulse) >> 1;
+      pulse = pulseAveraging;
+      pulseFloat = pulseFloat + 0.01*((float)pulse-pulseFloat);
+    }
+    if((lastOutput + 1000) < millis()) {
+      Serial.print(F("Pulse:   "));
+      Serial.println(pulse);
+      Serial.print(F("Last:    "));
+      Serial.println(tmpPulse);
+      Serial.print(F("Samples: "));
+      Serial.println(samples);
+      Serial.print(F("ADC M/M: "));
+      Serial.print(minADC); minADC = 255;
+      Serial.print(F(" / "));
+      Serial.println(maxADC); maxADC = 0;
+      Serial.print(F("Freq:    "));
+      // F = 1/(pulse*(1/ref))
+      // F = ref/pulse
+      Serial.print((float)((float)dds.getReferenceClock()+(float)dds.getReferenceOffset())/(float)pulse);
+      Serial.print(F(" / "));
+      Serial.print((float)((float)dds.getReferenceClock()+(float)dds.getReferenceOffset())/pulseFloat);
+      Serial.print(F(" / "));
+      Serial.println(pulseFloat);
+      Serial.print(F("Freq2:   "));
+      // F = 1/(pulse*(1/ref))
+      // F = ref/pulse
+      Serial.print((float)dds.getReferenceClock()/(float)pulse);
+      Serial.print(F(" / "));
+      Serial.println((float)dds.getReferenceClock()/pulseFloat);
+      samples = 0;
+      lastOutput = millis();
+    }
+  }
+  while(Serial.available()) {
+    char c = Serial.read();
+    Serial.print(c);
+    switch(c) {
+      case 'h':
+        Serial.println(F("Commands:"));
+        Serial.println(F("RefClk: u = +10, U = +100, r XXXX = XXXX"));
+        Serial.println(F("        d = -10, D = -100"));
+        Serial.println(F("Offset: s XXX = Set refclk offset"));
+        Serial.println(F("Radio:  T = transmit, R = receive"));
+        Serial.println(F("Tone:   t XXXX = XXXX Hz"));
+        Serial.println(F("Amp.:   a XXX  = XXX out of 255"));
+        Serial.println(F("DDS:    o = On, O = Off"));
+        Serial.println(F("Input:  l = Determine received frequency, L = stop"));
+        Serial.println(F("ADC:    m XXX = Set ADC midpoint (zero crossing level)"));
+        Serial.println(F("ie. a 31 = 32/255 amplitude, r38400 sets 38400Hz refclk"));
+        Serial.println("> ");
+        break;
+      case 'u':
+        dds.setReferenceClock(dds.getReferenceClock()+10);
+        dds.setFrequency(lastFreq);
+        dds.start();
+        Serial.println(F("RefClk + 10 = "));
+        Serial.println(dds.getReferenceClock());
+        Serial.println("> ");
+        break;
+      case 'U':
+        dds.setReferenceClock(dds.getReferenceClock()+100);
+        dds.setFrequency(lastFreq);
+        dds.start();
+        Serial.println(F("RefClk + 100 = "));
+        Serial.println(dds.getReferenceClock());
+        Serial.println("> ");
+        break;
+      case 'd':
+        dds.setReferenceClock(dds.getReferenceClock()-10);
+        dds.setFrequency(lastFreq);
+        dds.start();
+        Serial.println(F("RefClk - 10 = "));
+        Serial.println(dds.getReferenceClock());
+        Serial.println("> ");
+        break;
+      case 'D':
+        dds.setReferenceClock(dds.getReferenceClock()-100);
+        dds.setFrequency(lastFreq);
+        dds.start();
+        Serial.println(F("RefClk - 100 = "));
+        Serial.println(dds.getReferenceClock());
+        Serial.println("> ");
+        break;
+      case 'l':
+        Serial.println(F("Start frequency listening, DDS off"));
+        dds.off();
+        listening = true;
+        lastOutput = millis();
+        Serial.println("> ");
+        break;
+      case 'L':
+        Serial.println(F("Stop frequency listening, DDS on"));
+        listening = false;
+        samples = 0;
+        dds.on();
+        Serial.println("> ");
+        break;
+      case 'T':
+        Serial.println(F("Radio transmit"));
+        radio.setModeTransmit();
+        Serial.println("> ");
+        break;
+      case 'R':
+        Serial.println(F("Radio receive"));
+        radio.setModeReceive();
+        Serial.println("> ");
+        break;
+      case 'r':
+        setting = SET_REF;
+        break;
+      case 't':
+        setting = SET_TONE;
+        break;
+      case 'a':
+        setting = SET_AMPLITUDE;
+        break;
+      case 'm':
+        setting = SET_ADC_HALF;
+        break;
+      case 's':
+        setting = SET_OFFSET;
+        break;
+      case 'o':
+        dds.on();
+        Serial.println("> ");
+        break;
+      case 'O':
+        dds.off();
+        Serial.println("> ");
+        break;
+      default:
+        if(c == '-' || (c >= '0' && c <= '9')) {
+          *freqBufferPtr = c;
+          freqBufferPtr++;
+        }
+        if((c == '\n' || c == '\r') && freqBufferPtr != freqBuffer) {
+          *freqBufferPtr = '\0';
+          freqBufferPtr = freqBuffer;
+          uint16_t freq = atoi(freqBuffer);
+          if(setting == SET_REF) {
+            dds.setReferenceClock(freq);
+            dds.setFrequency(lastFreq);
+            dds.start();
+            Serial.print(F("New Reference Clock: "));
+            Serial.println(dds.getReferenceClock());
+          } else if(setting == SET_TONE) {
+            dds.setFrequency(freq);
+            lastFreq = freq;
+            Serial.print(F("New Tone: "));
+            Serial.println(freq);
+          } else if(setting == SET_AMPLITUDE) {
+            dds.setAmplitude((uint8_t)(freq&0xFF));
+            Serial.print(F("New Amplitude: "));
+            Serial.println((uint8_t)(freq&0xFF));
+          } else if(setting == SET_ADC_HALF) {
+            adcHalf = freq&0xFF;
+            Serial.print(F("ADC midpoint set to "));
+            Serial.println((uint8_t)(freq&0xFF));
+          } else if(setting == SET_OFFSET) {
+            dds.setReferenceOffset((int16_t)atoi(freqBuffer));
+            dds.setFrequency(lastFreq);
+            Serial.print(F("Refclk offset: "));
+            Serial.println(dds.getReferenceOffset());
+          }
+          Serial.println("> ");
+        }
+        break;
+    }
+  }
+}
+
+ISR(ADC_vect) {
+  static uint16_t pulseLength = 0;
+  static uint8_t lastADC = 127;
+  cli();
+  TIFR1 = _BV(ICF1);
+  //PORTD |= _BV(2);
+  dds.clockTick();
+  sei();
+  if(listening) {
+    pulseLength++;
+    if(ADCH >= adcHalf && lastADC < adcHalf) {
+      // Zero crossing, upward
+      recordedPulseLength = pulseLength;
+      recordedPulse = true;
+      pulseLength = 0;
+    }
+    if(minADC > ADCH) {
+      minADC = ADCH;
+    }
+    if(maxADC < ADCH) {
+      maxADC = ADCH;
+    }
+    lastADC = ADCH;
+  }
+  //PORTD &= ~_BV(2);
+}

examples/DDS/DDS.ino

@@ -0,0 +1,59 @@
+#define DDS_REFCLK_DEFAULT 9600
+#include <HamShield.h>
+#include <Wire.h>
+
+
+#define PWM_PIN 3
+#define RESET_PIN A3
+#define SWITCH_PIN 2
+
+HamShield radio;
+DDS dds;
+
+void setup() {
+  // NOTE: if not using PWM out, it should be held low to avoid tx noise
+  pinMode(PWM_PIN, OUTPUT);
+  digitalWrite(PWM_PIN, LOW);
+  
+  // prep the switch
+  pinMode(SWITCH_PIN, INPUT_PULLUP);
+  
+  // set up the reset control pin
+  pinMode(RESET_PIN, OUTPUT);
+  // turn on radio
+  digitalWrite(RESET_PIN, HIGH);
+  
+  Wire.begin();
+  radio.initialize();
+  radio.setRfPower(0);
+  radio.setFrequency(145060);
+  radio.setModeTransmit();
+  dds.start();
+  dds.playWait(600, 3000);
+  dds.on();
+  //dds.setAmplitude(31);
+}
+
+void loop() {
+  dds.setFrequency(2200);
+  delay(1000);
+  dds.setFrequency(1200);
+  delay(1000);
+}
+
+#ifdef DDS_USE_ONLY_TIMER2
+ISR(TIMER2_OVF_vect) {
+  dds.clockTick();
+}
+#else // Use the ADC timer instead
+ISR(ADC_vect) {
+  static unsigned char tcnt = 0;
+  TIFR1 = _BV(ICF1); // Clear the timer flag
+  if(++tcnt == 4) {
+    //digitalWrite(2, HIGH);
+    tcnt = 0;
+  }
+  dds.clockTick();
+  //digitalWrite(2, LOW);
+}
+#endif

examples/FMBeacon/FMBeacon.ino

@@ -9,11 +9,26 @@ Beacon will check to see if the channel is clear before it will transmit.
 #include <HamShield.h>
 #include <Wire.h>
 
+#define PWM_PIN 3
+#define RESET_PIN A3
+#define SWITCH_PIN 2
+
 // Create a new instance of our HamSheild class, called 'radio'
 HamShield radio;
 
 // Run our start up things here
 void setup() { 
+  // NOTE: if not using PWM out, it should be held low to avoid tx noise
+  pinMode(PWM_PIN, OUTPUT);
+  digitalWrite(PWM_PIN, LOW);
+  
+  // prep the switch
+  pinMode(SWITCH_PIN, INPUT_PULLUP);
+  
+  // set up the reset control pin
+  pinMode(RESET_PIN, OUTPUT);
+  digitalWrite(RESET_PIN, HIGH);
+  
   // Set up the serial port at 9600 Baud
   Serial.begin(9600);
   
@@ -30,16 +45,16 @@ void setup() {
   
   // Tell the HamShield to start up
   radio.initialize();
-  
+  radio.setRfPower(0);
   // Configure the HamShield to transmit and recieve on 446.000MHz
-  radio.frequency(446000);
+  radio.frequency(145570);
   
   Serial.println("Radio Configured.");
 }
 
 void loop() {
   // We'll wait up to 30 seconds for a clear channel, requiring that the channel is clear for 2 seconds before we transmit
-  if (radio.waitForChannel(30000,2000,-50)) {
+  if (radio.waitForChannel(30000,2000,-5)) {
     // If we get here, the channel is clear. Let's print the RSSI to the serial port as well.
     Serial.print("Signal is clear, RSSI: ");
     Serial.println(radio.readRSSI());
@@ -49,14 +64,14 @@ void loop() {
     radio.setModeTransmit();
     
     // Send a message out in morse code
-    radio.morseOut("CALLSIGN LOCATOR ARDUINO HAMSHIELD");
+    radio.morseOut("KC7IBT ARDUINO HAMSHIELD");
     
     // We're done sending the message, set the radio back into recieve mode.
     radio.setModeReceive();
     Serial.println("Done.");
     
     // Wait 30 seconds before we send our beacon again.
-    delay(30000);    
+    delay(1000);    
   } else {
     // If we get here, the channel is busy. Let's also print out the RSSI.
     Serial.print("The channel was busy. Waiting 10 seconds. RSSI: ");

examples/FoxHunt/FoxHunt.ino

@@ -3,6 +3,10 @@
 #include <HAMShield.h>
 #include <Wire.h>
 
+#define PWM_PIN 3
+#define RESET_PIN A3
+#define SWITCH_PIN 2
+
 // transmit for 1 minute, every 10 minutes 
 
 #define TRANSMITLENGTH 1
@@ -11,7 +15,18 @@
 
 HAMShield radio;
 
-void setup() { 
+void setup() {
+  // NOTE: if not using PWM out, it should be held low to avoid tx noise
+  pinMode(PWM_PIN, OUTPUT);
+  digitalWrite(PWM_PIN, LOW);
+  
+  // prep the switch
+  pinMode(SWITCH_PIN, INPUT_PULLUP);
+  
+  // set up the reset control pin
+  pinMode(RESET_PIN, OUTPUT);
+  digitalWrite(RESET_PIN, HIGH);
+  
   Wire.begin();
   radio.initialize();
   radio.setFrequency(145510);

examples/FunctionalTest/FunctionalTest.ino

@@ -0,0 +1,71 @@
+/* HamShield Functional Test */
+
+#include <HamShield.h>
+#include <Wire.h>
+
+#define PWM_PIN 3
+#define RESET_PIN A3
+#define SWITCH_PIN 2
+
+HamShield radio;
+
+void setup() {
+  // NOTE: if not using PWM out, it should be held low to avoid tx noise
+  pinMode(PWM_PIN, OUTPUT);
+  digitalWrite(PWM_PIN, LOW);
+  
+  // prep the switch
+  pinMode(SWITCH_PIN, INPUT_PULLUP);
+  
+  // set up the reset control pin
+  pinMode(RESET_PIN, OUTPUT);
+  digitalWrite(RESET_PIN, HIGH);
+  
+  Wire.begin();
+  Serial.begin(9600);
+  Serial.println("If the sketch freezes at radio status, there is something wrong with power or the shield");
+  Serial.print("Radio status: ");
+  int result = radio.testConnection();
+  Serial.println(result,DEC);
+  Serial.println("Setting radio to its defaults..");
+  radio.initialize();
+}
+
+void loop() {
+  radio.setModeReceive();
+  radio.setSQLoThresh(0);
+  radio.setSQOn();
+  radio.setVolume1(0xF);
+  radio.setVolume2(0xF);
+  delay(1000);
+  Serial.println("Changing frequency to 446.000 and waiting 10 seconds. You should hear static fading in.");
+    radio.frequency(446000);
+  for(int x = 0; x < 16; x++) { radio.setVolume1(x); delay(500); Serial.print(x); Serial.print(".."); } 
+  for(int x = 0; x < 16; x++) { radio.setVolume2(x); delay(500); Serial.print(x); Serial.print(".."); }   
+      radio.setVolume1(0xF);
+    radio.setVolume2(0xF);
+
+  delay(10000);
+  Serial.println("Changing frequency to 450.000 and waiting 10 seconds. You should hear static.");
+  radio.frequency(446000);
+  delay(10000);
+  Serial.println("Changing frequency to 220.000 and waiting 10 seconds. you should hear static.");
+  radio.frequency(220000);
+  delay(10000);
+  Serial.println("Changing frequency to 144.520 and waiting 10 seconds. you should hear static.");
+  radio.frequency(144520);
+  delay(10000);
+  Serial.println("Now lets scan for a weather radio station and listen for a while....");
+  radio.setWXChannel(radio.scanWXChannel());
+  Serial.println("If you hear weather radio, it means the scanWXChannel() and setWXChannel() and VHF works.");
+  Serial.println("We will sit here for 30 seconds because weather is important.");
+  delay(30000);
+  Serial.println("We will now tune to 446.000 and send morse code");
+  radio.frequency(446000);
+  radio.setModeTransmit();
+  radio.morseOut("HELLO PERSON");
+  radio.setModeReceive();
+  Serial.println("Now we are receiving on the call frequency. Starting over again.");
+ 
+}
+

examples/Gauges/Gauges.ino

@@ -10,6 +10,10 @@ Simple gauges for the radio receiver.
 #include <HAMShield.h>
 #include <Wire.h>
 
+#define PWM_PIN 3
+#define RESET_PIN A3
+#define SWITCH_PIN 2
+
 HAMShield radio;
 
 void clr() { 
@@ -19,7 +23,18 @@ void clr() {
   Serial.print("[H");     // cursor to home command 
 }
 
-void setup() { 
+void setup() {
+  // NOTE: if not using PWM out, it should be held low to avoid tx noise
+  pinMode(PWM_PIN, OUTPUT);
+  digitalWrite(PWM_PIN, LOW);
+  
+  // prep the switch
+  pinMode(SWITCH_PIN, INPUT_PULLUP);
+  
+  // set up the reset control pin
+  pinMode(RESET_PIN, OUTPUT);
+  digitalWrite(RESET_PIN, HIGH);
+  
   analogReference(DEFAULT);
   Serial.begin(115200);
   Wire.begin();

examples/HAMBot/HAMBot.ino

@@ -5,13 +5,28 @@
 #include <Wire.h>
 #include <SPI.h>
 
+#define PWM_PIN 3
+#define RESET_PIN A3
+#define SWITCH_PIN 2
+
 HAMShield radio;
 
-void setup() { 
+void setup() {
+  // NOTE: if not using PWM out, it should be held low to avoid tx noise
+  pinMode(PWM_PIN, OUTPUT);
+  digitalWrite(PWM_PIN, LOW);
+  
+  // prep the switch
+  pinMode(SWITCH_PIN, INPUT_PULLUP);
+  
+  // set up the reset control pin
+  pinMode(RESET_PIN, OUTPUT);
+  digitalWrite(RESET_PIN, HIGH);
+  
   Robot.begin();
   Wire.begin();
   radio.initialize();
-  radio.setFrequency(145510);
+  radio.frequency(145510);
 }
 
 void loop() {

examples/HandyTalkie/HandyTalkie.ino

@@ -0,0 +1,139 @@
+// Hamshield 
+
+// Arduino Wire library is required if I2Cdev I2CDEV_ARDUINO_WIRE implementation
+// is used in I2Cdev.h
+#include "Wire.h"
+
+#include <HamShield.h>
+
+// create object for radio
+HamShield radio;
+
+#define LED_PIN 13
+#define RSSI_REPORT_RATE_MS 5000
+
+//TODO: move these into library
+#define PWM_PIN 3
+#define RESET_PIN A3
+#define SWITCH_PIN 2
+
+bool blinkState = false;
+bool currently_tx;
+
+uint32_t freq;
+
+unsigned long rssi_timeout;
+
+void setup() {
+  // NOTE: if not using PWM out, it should be held low to avoid tx noise
+  pinMode(PWM_PIN, OUTPUT);
+  digitalWrite(PWM_PIN, LOW);
+  
+  // prep the switch
+  pinMode(SWITCH_PIN, INPUT_PULLUP);
+  
+  // set up the reset control pin
+  pinMode(RESET_PIN, OUTPUT);
+  digitalWrite(RESET_PIN, LOW);
+  
+  
+  // initialize serial communication
+  Serial.begin(9600);
+  Serial.println("press the switch to begin...");
+  
+  while (digitalRead(SWITCH_PIN));
+  
+  // let the AU ot of reset
+  digitalWrite(RESET_PIN, HIGH);
+  
+  Serial.println("beginning radio setup");
+  
+  // join I2C bus (I2Cdev library doesn't do this automatically)
+   Wire.begin();
+
+  // verify connection
+  Serial.println("Testing device connections...");
+  Serial.println(radio.testConnection() ? "RDA radio connection successful" : "RDA radio connection failed");
+
+  // initialize device
+  Serial.println("Initializing I2C devices...");
+  radio.initialize(); // initializes automatically for UHF 12.5kHz channel
+
+  Serial.println("setting default Radio configuration");
+  radio.dangerMode();
+
+  // set frequency
+  Serial.println("changing frequency");
+  
+  radio.setSQOff();
+  freq = 446000;
+  radio.frequency(freq);
+  
+  // set to receive
+  
+  radio.setModeReceive();
+  currently_tx = false;
+  Serial.print("config register is: ");
+  Serial.println(radio.readCtlReg());
+  Serial.println(radio.readRSSI());
+  
+/*
+  // set to transmit
+  radio.setModeTransmit();
+  // maybe set PA bias voltage
+  Serial.println("configured for transmit");
+  radio.setTxSourceMic();
+  
+  
+  */  
+  radio.setRfPower(0);
+    
+  // configure Arduino LED for
+  pinMode(LED_PIN, OUTPUT);
+  rssi_timeout = 0;
+
+}
+
+void loop() {  
+  if (!digitalRead(SWITCH_PIN))
+  {
+    if (!currently_tx) 
+    {
+      currently_tx = true;
+      
+      // set to transmit
+      radio.setModeTransmit();
+      Serial.println("Tx");
+      //radio.setTxSourceMic();
+      //radio.setRfPower(1);
+    }
+  } else if (currently_tx) {
+    radio.setModeReceive();
+    currently_tx = false;
+    Serial.println("Rx");
+  }
+  
+  
+  if (Serial.available()) {
+    if (Serial.peek() == 'r') {
+      Serial.read();
+      digitalWrite(RESET_PIN, LOW);
+      delay(1000);
+      digitalWrite(RESET_PIN, HIGH);
+      radio.initialize(); // initializes automatically for UHF 12.5kHz channel
+    } else {
+      Serial.setTimeout(40);
+      freq = Serial.parseInt();
+      Serial.flush();
+      radio.frequency(freq);
+      Serial.print("set frequency: ");
+      Serial.println(freq);
+    }
+  }
+  
+  if (!currently_tx && (millis() - rssi_timeout) > RSSI_REPORT_RATE_MS)
+  {
+    Serial.println(radio.readRSSI());
+    rssi_timeout = millis();
+  }
+}

examples/Identifier/Identifier.ino

@@ -6,11 +6,16 @@ Arduino audio overlay example
 
 */
 
+
 #include <HAMShield.h>
 #include <Wire.h>
 
 #define DOT 100
 
+#define PWM_PIN 3
+#define RESET_PIN A3
+#define SWITCH_PIN 2
+
 HAMShield radio;
 
 const char *bascii = "ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.,?'!/()&:;=+-_\"$@",
@@ -21,7 +26,18 @@ const char *callsign = {"1ZZ9ZZ/B"} ;
   
 char morsebuffer[8];  
   
-void setup() { 
+void setup() {
+// NOTE: if not using PWM out, it should be held low to avoid tx noise
+  pinMode(PWM_PIN, OUTPUT);
+  digitalWrite(PWM_PIN, LOW);
+  
+  // prep the switch
+  pinMode(SWITCH_PIN, INPUT_PULLUP);
+  
+  // set up the reset control pin
+  pinMode(RESET_PIN, OUTPUT);
+  digitalWrite(RESET_PIN, HIGH);
+  
   Serial.begin(9600);
   Serial.println("starting up..");
   Wire.begin();
@@ -29,7 +45,7 @@ void setup() {
   int result = radio.testConnection();
   Serial.println(result,DEC);
   radio.initialize();
-  radio.setFrequency(446000);
+  radio.frequency(446000);
   radio.setVolume1(0xF);
   radio.setVolume2(0xF);
   radio.setModeReceive();

examples/JustTransmit/JustTransmit.ino

@@ -0,0 +1,43 @@
+/* Just Transmit */
+
+#include <HamShield.h>
+#include <Wire.h>
+
+#define PWM_PIN 3
+#define RESET_PIN A3
+#define SWITCH_PIN 2
+
+HamShield radio;
+
+void setup() {
+  // NOTE: if not using PWM out, it should be held low to avoid tx noise
+  pinMode(PWM_PIN, OUTPUT);
+  digitalWrite(PWM_PIN, LOW);
+  
+  // prep the switch
+  pinMode(SWITCH_PIN, INPUT_PULLUP);
+  
+  // set up the reset control pin
+  pinMode(RESET_PIN, OUTPUT);
+  digitalWrite(RESET_PIN, HIGH);
+  
+  Wire.begin();
+  Serial.begin(9600);
+  Serial.println("If the sketch freezes at radio status, there is something wrong with power or the shield");
+  Serial.print("Radio status: ");
+  int result = radio.testConnection();
+  Serial.println(result,DEC);
+  Serial.println("Setting radio to its defaults..");
+  radio.initialize();
+  radio.setRfPower(0);
+  radio.setChanMode(3);
+}
+
+void loop() {
+  radio.bypassPreDeEmph();
+  radio.frequency(144000);
+  // radio.setTxSourceNone();
+  radio.setModeTransmit();
+  for(;;) { }
+}
+

examples/KISS/KISS.ino

@@ -0,0 +1,49 @@
+#include <HamShield.h>
+#include <Wire.h>
+#include <KISS.h>
+
+HamShield radio;
+DDS dds;
+KISS kiss(&Serial, &radio, &dds);
+
+//TODO: move these into library
+#define PWM_PIN 3
+#define RESET_PIN A3
+#define SWITCH_PIN 2
+
+void setup() {
+  // NOTE: if not using PWM out, it should be held low to avoid tx noise
+  pinMode(PWM_PIN, OUTPUT);
+  digitalWrite(PWM_PIN, LOW);
+  
+  // prep the switch
+  pinMode(SWITCH_PIN, INPUT_PULLUP);
+  
+  // set up the reset control pin
+  pinMode(RESET_PIN, OUTPUT);
+  digitalWrite(RESET_PIN, LOW);
+  
+  Serial.begin(9600);
+  
+  while (digitalRead(SWITCH_PIN));
+  
+  // let the AU ot of reset
+  digitalWrite(RESET_PIN, HIGH);
+  
+  Wire.begin();
+  radio.initialize();
+  radio.setSQOff();
+  radio.setFrequency(144390);
+  //I2Cdev::writeWord(A1846S_DEV_ADDR_SENLOW, 0x44, 0x05FF);
+
+  dds.start();
+  radio.afsk.start(&dds);
+}
+
+void loop() {
+  kiss.loop();
+}
+
+ISR(ADC_vect) {
+  kiss.isr();
+}

examples/PSK31Transmit/PSK31Transmit.ino

@@ -0,0 +1,105 @@
+#include <HamShield.h>
+#include "varicode.h"
+
+#define PWM_PIN 3
+#define RESET_PIN A3
+#define SWITCH_PIN 2
+
+DDS dds;
+
+void setup() {
+  // NOTE: if not using PWM out, it should be held low to avoid tx noise
+  pinMode(PWM_PIN, OUTPUT);
+  digitalWrite(PWM_PIN, LOW);
+  
+  // prep the switch
+  pinMode(SWITCH_PIN, INPUT_PULLUP);
+  
+  // set up the reset control pin
+  pinMode(RESET_PIN, OUTPUT);
+  digitalWrite(RESET_PIN, HIGH);
+  
+  Serial.begin(9600);
+  // put your setup code here, to run once:
+  dds.setReferenceClock(32000);
+  dds.start();
+  dds.setFrequency(1000);
+  dds.on();
+}
+
+volatile bool sent = true;
+volatile uint16_t bitsToSend = 0;
+volatile uint8_t zeroCount = 0;
+
+void sendChar(uint8_t c) {
+  uint16_t bits = varicode[c];
+  while((bits&0x8000)==0) {
+    bits<<=1;
+  }
+  while(!sent) {} //delay(32);
+  cli();
+  sent = false;
+  bitsToSend = bits;
+  sei();
+  while(!sent) {} //delay(32);
+  //PORTD &= ~_BV(2); // Diagnostic pin (D2)
+}
+
+char *string = "Why hello there, friend. Nice to meet you. Welcome to PSK31. 73, VE6SLP sk\r\n";
+void loop() {
+  int i;
+  // put your main code here, to run repeatedly:
+  //for(i = 0; i<5; i++)
+  //  sendChar(0);
+  //  return;
+  for(i = 0; i < strlen(string); i++) {
+    sendChar(string[i]);
+    //Serial.println(string[i]);
+  }
+}
+
+const uint8_t amplitudeShape[41] = {
+  255, 241, 228, 215, 203, 191, 181, 171, 161, 152, 143, 135, 128, 121, 114, 107, 101, 96, 90, 85, 80, 76, 72, 68, 64, 60, 57, 54, 51, 48, 45, 42, 40, 38, 36, 34, 32, 30, 28, 27, 25
+};
+
+// This will trigger at 8kHz
+ISR(ADC_vect) {
+  static uint8_t outer = 0;
+  static uint8_t tcnt = 0;
+  TIFR1 |= _BV(ICF1);
+  // Wave shaping
+  // TODO: Improve how this would perform.
+  //else if(tcnt > (255-64))
+  //  dds.setAmplitude((255 - tcnt));
+  //else dds.setAmplitude(255);
+  if(tcnt < 81)
+    dds.setAmplitude(amplitudeShape[(81-tcnt)/2]);
+  if(tcnt > (255-81))
+    dds.setAmplitude(amplitudeShape[(tcnt-174)/2]);
+  dds.clockTick();
+  //PORTD &= ~_BV(2);
+  if(outer++ == 3) {
+    outer = 0;
+  } else {
+    return;
+  }
+  if(tcnt++ == 0) { // Next bit
+    //PORTD ^= _BV(2); // Diagnostic pin (D2)
+    if(!sent) {
+      if((bitsToSend & 0x8000) == 0) {
+        zeroCount++;
+        dds.changePhaseDeg(+180);
+      } else {
+        zeroCount = 0;
+      }
+      bitsToSend<<=1;
+      if(zeroCount == 2) {
+        sent = true;
+      }
+    } else {
+      // Idle on zeroes
+      dds.changePhaseDeg(+180);
+    }
+  }
+  //PORTD &= ~_BV(2);
+}

examples/PSK31Transmit/varicode.h

@@ -0,0 +1,130 @@
+const uint16_t varicode[] = {
+0xAAC0, // ASCII =   0  1010101011
+0xB6C0, // ASCII =   1  1011011011
+0xBB40, // ASCII =   2  1011101101
+0xDDC0, // ASCII =   3  1101110111
+0xBAC0, // ASCII =   4  1011101011
+0xD7C0, // ASCII =   5  1101011111
+0xBBC0, // ASCII =   6  1011101111
+0xBF40, // ASCII =   7  1011111101
+0xBFC0, // ASCII =   8  1011111111
+0xEF00, // ASCII =   9  11101111
+0xE800, // ASCII =  10  11101
+0xDBC0, // ASCII =  11  1101101111
+0xB740, // ASCII =  12  1011011101
+0xF800, // ASCII =  13  11111
+0xDD40, // ASCII =  14  1101110101
+0xEAC0, // ASCII =  15  1110101011
+0xBDC0, // ASCII =  16  1011110111
+0xBD40, // ASCII =  17  1011110101
+0xEB40, // ASCII =  18  1110101101
+0xEBC0, // ASCII =  19  1110101111
+0xD6C0, // ASCII =  20  1101011011
+0xDAC0, // ASCII =  21  1101101011
+0xDB40, // ASCII =  22  1101101101
+0xD5C0, // ASCII =  23  1101010111
+0xDEC0, // ASCII =  24  1101111011
+0xDF40, // ASCII =  25  1101111101
+0xEDC0, // ASCII =  26  1110110111
+0xD540, // ASCII =  27  1101010101
+0xD740, // ASCII =  28  1101011101
+0xEEC0, // ASCII =  29  1110111011
+0xBEC0, // ASCII =  30  1011111011
+0xDFC0, // ASCII =  31  1101111111
+0x8000, // ASCII = ' '  1
+0xFF80, // ASCII = '!'  111111111
+0xAF80, // ASCII = '"'  101011111
+0xFA80, // ASCII = '#'  111110101
+0xED80, // ASCII = '$'  111011011
+0xB540, // ASCII = '%'  1011010101
+0xAEC0, // ASCII = '&'  1010111011
+0xBF80, // ASCII = '''  101111111
+0xFB00, // ASCII = '('  11111011
+0xF700, // ASCII = ')'  11110111
+0xB780, // ASCII = '*'  101101111
+0xEF80, // ASCII = '+'  111011111
+0xEA00, // ASCII = ','  1110101
+0xD400, // ASCII = '-'  110101
+0xAE00, // ASCII = '.'  1010111
+0xD780, // ASCII = '/'  110101111
+0xB700, // ASCII = '0'  10110111
+0xBD00, // ASCII = '1'  10111101
+0xED00, // ASCII = '2'  11101101
+0xFF00, // ASCII = '3'  11111111
+0xBB80, // ASCII = '4'  101110111
+0xAD80, // ASCII = '5'  101011011
+0xB580, // ASCII = '6'  101101011
+0xD680, // ASCII = '7'  110101101
+0xD580, // ASCII = '8'  110101011
+0xDB80, // ASCII = '9'  110110111
+0xF500, // ASCII = ':'  11110101
+0xDE80, // ASCII = ';'  110111101
+0xF680, // ASCII = '<'  111101101
+0xAA00, // ASCII = '='  1010101
+0xEB80, // ASCII = '>'  111010111
+0xABC0, // ASCII = '?'  1010101111
+0xAF40, // ASCII = '@'  1010111101
+0xFA00, // ASCII = 'A'  1111101
+0xEB00, // ASCII = 'B'  11101011
+0xAD00, // ASCII = 'C'  10101101
+0xB500, // ASCII = 'D'  10110101
+0xEE00, // ASCII = 'E'  1110111
+0xDB00, // ASCII = 'F'  11011011
+0xFD00, // ASCII = 'G'  11111101
+0xAA80, // ASCII = 'H'  101010101
+0xFE00, // ASCII = 'I'  1111111
+0xFE80, // ASCII = 'J'  111111101
+0xBE80, // ASCII = 'K'  101111101
+0xD700, // ASCII = 'L'  11010111
+0xBB00, // ASCII = 'M'  10111011
+0xDD00, // ASCII = 'N'  11011101
+0xAB00, // ASCII = 'O'  10101011
+0xD500, // ASCII = 'P'  11010101
+0xEE80, // ASCII = 'Q'  111011101
+0xAF00, // ASCII = 'R'  10101111
+0xDE00, // ASCII = 'S'  1101111
+0xDA00, // ASCII = 'T'  1101101
+0xAB80, // ASCII = 'U'  101010111
+0xDA80, // ASCII = 'V'  110110101
+0xAE80, // ASCII = 'W'  101011101
+0xBA80, // ASCII = 'X'  101110101
+0xBD80, // ASCII = 'Y'  101111011
+0xAB40, // ASCII = 'Z'  1010101101
+0xFB80, // ASCII = '['  1111101110
+0xF780, // ASCII = '\'  111101111
+0xFD80, // ASCII = ']'  111111011
+0xAFC0, // ASCII = '^'  1010111111
+0xB680, // ASCII = '_'  101101101
+0xB7C0, // ASCII = '`'  1011011111
+0xB000, // ASCII = 'a'  1011
+0xBE00, // ASCII = 'b'  1011111
+0xBC00, // ASCII = 'c'  101111
+0xB400, // ASCII = 'd'  101101
+0xC000, // ASCII = 'e'  11
+0xF400, // ASCII = 'f'  111101
+0xB600, // ASCII = 'g'  1011011
+0xAC00, // ASCII = 'h'  101011
+0xD000, // ASCII = 'i'  1101
+0xF580, // ASCII = 'j'  111101011
+0xBF00, // ASCII = 'k'  10111111
+0xD800, // ASCII = 'l'  11011
+0xEC00, // ASCII = 'm'  111011
+0xF000, // ASCII = 'n'  1111
+0xE000, // ASCII = 'o'  111
+0xFC00, // ASCII = 'p'  111111
+0xDF80, // ASCII = 'q'  110111111
+0xA800, // ASCII = 'r'  10101
+0xB800, // ASCII = 's'  10111
+0xA000, // ASCII = 't'  101
+0xDC00, // ASCII = 'u'  110111
+0xF600, // ASCII = 'v'  1111011
+0xD600, // ASCII = 'w'  1101011
+0xDF00, // ASCII = 'x'  11011111
+0xBA00, // ASCII = 'y'  1011101
+0xEA80, // ASCII = 'z'  111010101
+0xADC0, // ASCII = '{'  1010110111
+0xDD80, // ASCII = '|'  110111011
+0xAD40, // ASCII = '}'  1010110101
+0xB5C0, // ASCII = '~'  1011010111
+0xED40  // ASCII = 127  1110110101
+};

examples/Parrot/Parrot.ino

@@ -9,6 +9,10 @@ A bit robotic and weird
 #include <HAMShield.h>
 #include <Wire.h>
 
+#define PWM_PIN 3
+#define RESET_PIN A3
+#define SWITCH_PIN 2
+
 #define RATE 500
 #define SIZE 1500
 
@@ -21,6 +25,17 @@ int16_t rssi;
 byte mode = 8;
 
 void setup() { 
+  // NOTE: if not using PWM out, it should be held low to avoid tx noise
+  pinMode(PWM_PIN, OUTPUT);
+  digitalWrite(PWM_PIN, LOW);
+  
+  // prep the switch
+  pinMode(SWITCH_PIN, INPUT_PULLUP);
+  
+  // set up the reset control pin
+  pinMode(RESET_PIN, OUTPUT);
+  digitalWrite(RESET_PIN, HIGH);
+  
   Wire.begin();
   // int result = radio.testConnection();
   radio.initialize();

examples/QPSK63Transmit/QPSK63Transmit.ino

@@ -0,0 +1,111 @@
+#include <HamShield.h>
+#include "varicode.h"
+
+#define PWM_PIN 3
+#define RESET_PIN A3
+#define SWITCH_PIN 2
+
+DDS dds;
+
+void setup() {
+  // NOTE: if not using PWM out, it should be held low to avoid tx noise
+  pinMode(PWM_PIN, OUTPUT);
+  digitalWrite(PWM_PIN, LOW);
+  
+  // prep the switch
+  pinMode(SWITCH_PIN, INPUT_PULLUP);
+  
+  // set up the reset control pin
+  pinMode(RESET_PIN, OUTPUT);
+  digitalWrite(RESET_PIN, LOW);
+  
+  
+  Serial.begin(9600);
+  // put your setup code here, to run once:
+  dds.setReferenceClock(32000);
+  dds.start();
+  dds.setFrequency(1000);
+  dds.on();
+}
+
+volatile bool sent = true;
+volatile uint16_t bitsToSend = 0;
+volatile uint8_t zeroCount = 0;
+
+void sendChar(uint8_t c) {
+  uint16_t bits = varicode[c];
+  while((bits&0x8000)==0) {
+    bits<<=1;
+  }
+  while(!sent) {} //delay(32);
+  cli();
+  sent = false;
+  bitsToSend = bits;
+  sei();
+  while(!sent) {} //delay(32);
+  //PORTD &= ~_BV(2); // Diagnostic pin (D2)
+}
+
+char *string = "Why hello there, friend. Nice to meet you. Welcome to PSK31. 73, VE6SLP sk\r\n";
+void loop() {
+  int i;
+  // put your main code here, to run repeatedly:
+  //for(i = 0; i<5; i++)
+  //  sendChar(0);
+  //  return;
+  for(i = 0; i < strlen(string); i++) {
+    sendChar(string[i]);
+    //Serial.println(string[i]);
+  }
+}
+
+const uint8_t amplitudeShape[41] = {
+  255, 241, 228, 215, 203, 191, 181, 171, 161, 152, 143, 135, 128, 121, 114, 107, 101, 96, 90, 85, 80, 76, 72, 68, 64, 60, 57, 54, 51, 48, 45, 42, 40, 38, 36, 34, 32, 30, 28, 27, 25
+};
+
+// This will trigger at 8kHz
+const uint16_t qpskConvolution[32] = {
+  180, 90, -90, 0, -90, 0, 180, 90,
+  0, -90, 90, 180, 90, 180, 0, -90,
+  90, 180, 0, -90, 0, -90, 90, 180,
+  -90, 0, 180, 90, 180, 90, -90, 0
+};
+uint8_t last5Bits = 0b00000;
+ISR(ADC_vect) {
+  static uint8_t outer = 0;
+  static uint8_t tcnt = 0;
+  TIFR1 |= _BV(ICF1);
+  // Wave shaping
+  // TODO: Improve how this would perform.
+  if(tcnt < 81)
+    dds.setAmplitude(amplitudeShape[(81-tcnt)/2]);
+  if(tcnt > (255-81))
+    dds.setAmplitude(amplitudeShape[(tcnt-174)/2]);
+  dds.clockTick();
+
+  if(outer++ == 1) {
+    outer = 0;
+  } else {
+    return;
+  }
+  
+  if(tcnt++ == 0) { // Next bit
+    last5Bits <<= 1;
+    if(!sent) {
+      if((bitsToSend & 0x8000) == 0) {
+        zeroCount++;
+      } else {
+        zeroCount = 0;
+        last5Bits |= 1;
+      }
+      dds.changePhaseDeg(qpskConvolution[last5Bits&31]);
+      bitsToSend<<=1;
+      if(zeroCount == 2) {
+        sent = true;
+      }
+    } else {
+      // Idle on zeroes
+      dds.changePhaseDeg(qpskConvolution[last5Bits&31]);
+    }
+  }
+}

examples/QPSK63Transmit/varicode.h

@@ -0,0 +1,130 @@
+const uint16_t varicode[] = {
+0xAAC0, // ASCII =   0  1010101011
+0xB6C0, // ASCII =   1  1011011011
+0xBB40, // ASCII =   2  1011101101
+0xDDC0, // ASCII =   3  1101110111
+0xBAC0, // ASCII =   4  1011101011
+0xD7C0, // ASCII =   5  1101011111
+0xBBC0, // ASCII =   6  1011101111
+0xBF40, // ASCII =   7  1011111101
+0xBFC0, // ASCII =   8  1011111111
+0xEF00, // ASCII =   9  11101111
+0xE800, // ASCII =  10  11101
+0xDBC0, // ASCII =  11  1101101111
+0xB740, // ASCII =  12  1011011101
+0xF800, // ASCII =  13  11111
+0xDD40, // ASCII =  14  1101110101
+0xEAC0, // ASCII =  15  1110101011
+0xBDC0, // ASCII =  16  1011110111
+0xBD40, // ASCII =  17  1011110101
+0xEB40, // ASCII =  18  1110101101
+0xEBC0, // ASCII =  19  1110101111
+0xD6C0, // ASCII =  20  1101011011
+0xDAC0, // ASCII =  21  1101101011
+0xDB40, // ASCII =  22  1101101101
+0xD5C0, // ASCII =  23  1101010111
+0xDEC0, // ASCII =  24  1101111011
+0xDF40, // ASCII =  25  1101111101
+0xEDC0, // ASCII =  26  1110110111
+0xD540, // ASCII =  27  1101010101
+0xD740, // ASCII =  28  1101011101
+0xEEC0, // ASCII =  29  1110111011
+0xBEC0, // ASCII =  30  1011111011
+0xDFC0, // ASCII =  31  1101111111
+0x8000, // ASCII = ' '  1
+0xFF80, // ASCII = '!'  111111111
+0xAF80, // ASCII = '"'  101011111
+0xFA80, // ASCII = '#'  111110101
+0xED80, // ASCII = '$'  111011011
+0xB540, // ASCII = '%'  1011010101
+0xAEC0, // ASCII = '&'  1010111011
+0xBF80, // ASCII = '''  101111111
+0xFB00, // ASCII = '('  11111011
+0xF700, // ASCII = ')'  11110111
+0xB780, // ASCII = '*'  101101111
+0xEF80, // ASCII = '+'  111011111
+0xEA00, // ASCII = ','  1110101
+0xD400, // ASCII = '-'  110101
+0xAE00, // ASCII = '.'  1010111
+0xD780, // ASCII = '/'  110101111
+0xB700, // ASCII = '0'  10110111
+0xBD00, // ASCII = '1'  10111101
+0xED00, // ASCII = '2'  11101101
+0xFF00, // ASCII = '3'  11111111
+0xBB80, // ASCII = '4'  101110111
+0xAD80, // ASCII = '5'  101011011
+0xB580, // ASCII = '6'  101101011
+0xD680, // ASCII = '7'  110101101
+0xD580, // ASCII = '8'  110101011
+0xDB80, // ASCII = '9'  110110111
+0xF500, // ASCII = ':'  11110101
+0xDE80, // ASCII = ';'  110111101
+0xF680, // ASCII = '<'  111101101
+0xAA00, // ASCII = '='  1010101
+0xEB80, // ASCII = '>'  111010111
+0xABC0, // ASCII = '?'  1010101111
+0xAF40, // ASCII = '@'  1010111101
+0xFA00, // ASCII = 'A'  1111101
+0xEB00, // ASCII = 'B'  11101011
+0xAD00, // ASCII = 'C'  10101101
+0xB500, // ASCII = 'D'  10110101
+0xEE00, // ASCII = 'E'  1110111
+0xDB00, // ASCII = 'F'  11011011
+0xFD00, // ASCII = 'G'  11111101
+0xAA80, // ASCII = 'H'  101010101
+0xFE00, // ASCII = 'I'  1111111
+0xFE80, // ASCII = 'J'  111111101
+0xBE80, // ASCII = 'K'  101111101
+0xD700, // ASCII = 'L'  11010111
+0xBB00, // ASCII = 'M'  10111011
+0xDD00, // ASCII = 'N'  11011101
+0xAB00, // ASCII = 'O'  10101011
+0xD500, // ASCII = 'P'  11010101
+0xEE80, // ASCII = 'Q'  111011101
+0xAF00, // ASCII = 'R'  10101111
+0xDE00, // ASCII = 'S'  1101111
+0xDA00, // ASCII = 'T'  1101101
+0xAB80, // ASCII = 'U'  101010111
+0xDA80, // ASCII = 'V'  110110101
+0xAE80, // ASCII = 'W'  101011101
+0xBA80, // ASCII = 'X'  101110101
+0xBD80, // ASCII = 'Y'  101111011
+0xAB40, // ASCII = 'Z'  1010101101
+0xFB80, // ASCII = '['  1111101110
+0xF780, // ASCII = '\'  111101111
+0xFD80, // ASCII = ']'  111111011
+0xAFC0, // ASCII = '^'  1010111111
+0xB680, // ASCII = '_'  101101101
+0xB7C0, // ASCII = '`'  1011011111
+0xB000, // ASCII = 'a'  1011
+0xBE00, // ASCII = 'b'  1011111
+0xBC00, // ASCII = 'c'  101111
+0xB400, // ASCII = 'd'  101101
+0xC000, // ASCII = 'e'  11
+0xF400, // ASCII = 'f'  111101
+0xB600, // ASCII = 'g'  1011011
+0xAC00, // ASCII = 'h'  101011
+0xD000, // ASCII = 'i'  1101
+0xF580, // ASCII = 'j'  111101011
+0xBF00, // ASCII = 'k'  10111111
+0xD800, // ASCII = 'l'  11011
+0xEC00, // ASCII = 'm'  111011
+0xF000, // ASCII = 'n'  1111
+0xE000, // ASCII = 'o'  111
+0xFC00, // ASCII = 'p'  111111
+0xDF80, // ASCII = 'q'  110111111
+0xA800, // ASCII = 'r'  10101
+0xB800, // ASCII = 's'  10111
+0xA000, // ASCII = 't'  101
+0xDC00, // ASCII = 'u'  110111
+0xF600, // ASCII = 'v'  1111011
+0xD600, // ASCII = 'w'  1101011
+0xDF00, // ASCII = 'x'  11011111
+0xBA00, // ASCII = 'y'  1011101
+0xEA80, // ASCII = 'z'  111010101
+0xADC0, // ASCII = '{'  1010110111
+0xDD80, // ASCII = '|'  110111011
+0xAD40, // ASCII = '}'  1010110101
+0xB5C0, // ASCII = '~'  1011010111
+0xED40  // ASCII = 127  1110110101
+};

examples/SSTV/SSTV.ino

@@ -4,6 +4,10 @@ Sends an SSTV test pattern
 
 */
 
+#define PWM_PIN 3
+#define RESET_PIN A3
+#define SWITCH_PIN 2
+
 #define DOT 100
 #define CALLSIGN "1ZZ9ZZ/B"
 
@@ -17,14 +21,25 @@ int16_t rssi;
 
 /* get our radio ready */
 
-void setup() { 
+void setup() {
+  // NOTE: if not using PWM out, it should be held low to avoid tx noise
+  pinMode(PWM_PIN, OUTPUT);
+  digitalWrite(PWM_PIN, LOW);
+  
+  // prep the switch
+  pinMode(SWITCH_PIN, INPUT_PULLUP);
+  
+  // set up the reset control pin
+  pinMode(RESET_PIN, OUTPUT);
+  digitalWrite(RESET_PIN, HIGH);
+  
   Wire.begin();
   Serial.begin(9600);
   Serial.print("Radio status: ");
   int result = radio.testConnection();
   Serial.println(result);
   radio.initialize();
-  radio.setFrequency(446000);
+  radio.frequency(446000);
   radio.setModeReceive();
 }
 

examples/SSTV_M1_Static/SSTV_M1_Static.ino

@@ -0,0 +1,441 @@
+// So the precalculated values will get stored
+#define DDS_REFCLK_DEFAULT (34965/2)
+
+#include <HamShield.h>
+#include <Wire.h>
+
+#define PWM_PIN 3
+#define RESET_PIN A3
+#define SWITCH_PIN 2
+
+HamShield radio;
+DDS dds;
+// Defined at the end of the sketch
+extern const uint16_t image[256*20] PROGMEM;
+
+#define F_1200 0
+#define F_1500 1
+#define F_2400 2
+ddsAccumulator_t freqTable[3];
+
+void setup() {
+  // NOTE: if not using PWM out, it should be held low to avoid tx noise
+  pinMode(PWM_PIN, OUTPUT);
+  digitalWrite(PWM_PIN, LOW);
+  
+  // prep the switch
+  pinMode(SWITCH_PIN, INPUT_PULLUP);
+  
+  // set up the reset control pin
+  pinMode(RESET_PIN, OUTPUT);
+  digitalWrite(RESET_PIN, HIGH);
+  
+  Serial.begin(9600);
+  Wire.begin();
+    // Query the HamShield for status information
+  Serial.print("Radio status: ");
+  int result = 0;
+  result = radio.testConnection();
+  Serial.println(result,DEC);
+  
+  // Tell the HamShield to start up
+  radio.initialize();
+  radio.setRfPower(0);
+  radio.frequency(145500);
+  // put your setup code here, to run once:
+  //dds.setReferenceClock(34965/4);
+  dds.start();
+  freqTable[F_1200] = dds.calcFrequency(1200);
+  freqTable[F_1500] = dds.calcFrequency(1500);
+  freqTable[F_2400] = dds.calcFrequency(2400);
+  dds.setFrequency(1000);
+  dds.on();
+  Serial.println("DDS on");
+  delay(1000);
+  dds.off();
+  delay(2000);
+  Serial.println("Next");
+}
+
+uint8_t code = MARTIN1;
+bool parityCalc(int code) {  
+     unsigned int v;       // word value to compute the parity of
+     bool parity = false;  // parity will be the parity of v
+
+    while (code)
+    {
+       parity = !parity;
+       code = code & (code - 1);
+    }
+
+    return parity;
+}
+
+volatile bool registered = false;
+volatile bool scanning = false;
+volatile bool done = false;
+volatile uint16_t nextBlock = 0;
+volatile uint8_t currentScanline = 0;
+volatile uint16_t scanline[2][20];
+
+// Format is 3 'images', one each for green, blue and red
+// But we don't have room, so it's monochrome
+// 256 rows each
+// 10 sets of 32 bits encoding on/off for the colour
+//const unsigned long image[256][10] PROGMEM = {
+ 
+//};
+
+void loadScanline(uint8_t s, int y) {
+  for(int i = 0; i < 20; i++) {
+    scanline[s][i] = pgm_read_word_near(image + y*20 + i);
+  }
+}
+#define DON()  PORTD |= _BV(2);
+#define DOFF() PORTD &= ~_BV(2);
+void loop() {
+  // Load the first scanline
+  loadScanline(0, 0);
+  radio.setModeTransmit();
+  delay(500);
+  // VIS
+  dds.playWait(1900,300);
+  dds.playWait(1200,10);
+  dds.playWait(1900,300);
+  dds.playWait(1200,30);
+  for(int x = 0; x < 7; x++) { 
+     if(bitRead(code,x)) { dds.playWait(1100,30); } else { dds.playWait(1300,30); } 
+  } 
+  if(parityCalc(code)) { dds.playWait(1300,30); } else { dds.playWait(1100,30); } 
+  dds.playWait(1200,30);
+  dds.on();
+  for(int y = 1; y < 256; y++){
+    DON();
+    dds.setPrecalcFrequency(freqTable[F_1200]);
+    // Subtract for the timer ticks
+    delayMicroseconds(3562);              // sync pulse (4862 uS)
+    DOFF();
+    DON();
+    dds.setPrecalcFrequency(freqTable[F_1500]);
+    // Subtract for the timer ticks
+    delayMicroseconds(442);               // sync porch (572 uS)
+    DOFF();
+    scanning = true;
+    for(uint8_t c = 0; c<3; c++) {
+      scanning = true;
+      while(!registered);
+      registered = false;
+      loadScanline((++currentScanline) & 1, y);
+      while(!done);
+      dds.setPrecalcFrequency(freqTable[F_1500]);
+      done = false;
+      scanning = false;
+      DON();
+      delayMicroseconds(442);               // color separator pulse (572 uS)
+      DOFF();
+    }
+  }
+  dds.off();
+  radio.setModeReceive();
+  delay(10000);
+  return;
+}
+
+// The DDS is running faster than the pixel clock, so we
+// only update the pixel frequency every few ticks.
+ISR(ADC_vect) {
+  static uint8_t tcnt = 0;
+  static uint8_t shifts = 0;
+  static uint8_t shiftingLine = 0;
+  static uint8_t linePos = 0;
+  static uint16_t pixelBlock;
+  TIFR1 |= _BV(ICF1);
+  dds.clockTick();
+  if(scanning) {
+    if(++tcnt == 8) {
+      tcnt = 0;
+      if(linePos == 21) {
+        done = true;
+        linePos = 0;
+      }
+      if(linePos == 0) {
+        shifts = 0;
+        shiftingLine = currentScanline&1;
+        registered = true;
+      }
+      if(shifts == 0) {
+        pixelBlock = scanline[shiftingLine][linePos++];
+      }
+      
+      if(pixelBlock & 0x8000) {
+        dds.setPrecalcFrequency(freqTable[F_2400]);
+      } else {
+        dds.setPrecalcFrequency(freqTable[F_1500]);
+      }
+      if(++shifts == 16) {
+        shifts = 0;
+      }
+      pixelBlock <<= 1;
+    }
+  }
+}
+
+// Image is 256 lines * 320 pixels per line, packed to 16 bits at a time
+const uint16_t image[256*20] PROGMEM = {
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 1
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 2
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 3
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 4
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 5
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 6
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 7
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 8
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 9
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 10
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 11
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 12
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 13
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 14
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 15
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 16
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 17
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 18
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 19
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 20
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 21
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 22
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 23
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 24
+0xFFFF, 0xE0FF, 0x07FF, 0xBFCF, 0xFFFF, 0xFFC1, 0xF3FE, 0x7FF9, 0xFF3F, 0xFC1F, 0xE0FF, 0xF7F9, 0xFFFF, 0xFFF8, 0x3E7F, 0xCFFF, 0x3FE7, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 25
+0xFFFF, 0x807C, 0x03FF, 0x3FCF, 0xFFFF, 0xFF80, 0x73FE, 0x7FF9, 0xFF3F, 0xF00F, 0x807F, 0xE7F9, 0xFFFF, 0xFFF0, 0x0E7F, 0xCFFF, 0x3FE7, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 26
+0xFFFF, 0x1F38, 0xF9FF, 0x3FCF, 0xFFFF, 0xFF1E, 0x33FF, 0xFFF9, 0xFF3F, 0xE3E7, 0x1F3F, 0xE7F9, 0xFFFF, 0xFFE3, 0xC67F, 0xFFFF, 0x3FE7, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 27
+0xFFFF, 0x3F19, 0xFCFF, 0x3FCF, 0xFFFF, 0xFF3F, 0x33FF, 0xFFF9, 0xFF3F, 0xE7E3, 0x3F9F, 0xE7F9, 0xFFFF, 0xFFE7, 0xE67F, 0xFFFF, 0x3FE7, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 28
+0xFFFE, 0x7FF3, 0xFCFF, 0x3FCF, 0x0723, 0x8F3F, 0xF21E, 0x7879, 0xE13F, 0xCFFE, 0x7F9F, 0xE7F9, 0xE0E4, 0x71E7, 0xFE43, 0xCF0F, 0x3C27, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 29
+0xFFFE, 0x7FF3, 0xFCFF, 0x3FCE, 0x0300, 0x071F, 0xF00E, 0x7019, 0xC03F, 0xCFFE, 0x7F9F, 0xE7F9, 0xC060, 0x00E3, 0xFE01, 0xCE03, 0x3807, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 30
+0xFFFE, 0x7FF3, 0xFE7F, 0x000C, 0xF31C, 0x7381, 0xF1E6, 0x6799, 0x9E3F, 0xCFFE, 0x7FCF, 0xE001, 0x9E63, 0x8E70, 0x3E3C, 0xCCF3, 0x33C7, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 31
+0xFFFE, 0x7FF3, 0xFC7F, 0x000F, 0x833C, 0xF3F0, 0x73E6, 0x67C9, 0x9F3F, 0xCFFE, 0x7F8F, 0xE001, 0xF067, 0x9E7E, 0x0E7C, 0xCCF9, 0x33E7, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 32
+0xFFFE, 0x7FF3, 0xFCFF, 0x3FCE, 0x033C, 0xF3FF, 0x33E6, 0x6009, 0x9F3F, 0xCFFE, 0x7F9F, 0xE7F9, 0xC067, 0x9E7F, 0xE67C, 0xCC01, 0x33E7, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 33
+0xFFFE, 0x7FB3, 0xFCFF, 0x3FCC, 0xF33C, 0xF3FF, 0x33E6, 0x67F9, 0x9F3F, 0xCFF6, 0x7F9F, 0xE7F9, 0x9E67, 0x9E7F, 0xE67C, 0xCCFF, 0x33E7, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 34
+0xFFFF, 0x3F19, 0xE0FF, 0x3FCC, 0xF33C, 0xF33F, 0x33E6, 0x67F9, 0x9F3F, 0xE7E3, 0x3C1F, 0xE7F9, 0x9E67, 0x9E67, 0xE67C, 0xCCFF, 0x33E7, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 35
+0xFFFF, 0x1F38, 0xF1FF, 0x3FCC, 0xE33C, 0xF31F, 0x33E6, 0x6789, 0x9E3F, 0xE3E7, 0x1E3F, 0xE7F9, 0x9C67, 0x9E63, 0xE67C, 0xCCF1, 0x33C7, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 36
+0xFFFF, 0x807C, 0x01FF, 0x3FCC, 0x033C, 0xF380, 0x73E6, 0x7019, 0xC03F, 0xF00F, 0x803F, 0xE7F9, 0x8067, 0x9E70, 0x0E7C, 0xCE03, 0x3807, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 37
+0xFFFF, 0xE0FF, 0x04FF, 0xBFCE, 0x1B3C, 0xF3C0, 0xF3E6, 0x7839, 0xE13F, 0xFC1F, 0xE09F, 0xF7F9, 0xC367, 0x9E78, 0x1E7C, 0xCF07, 0x3C27, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 38
+0xFFFF, 0xFFFF, 0xFEFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFDF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 39
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 40
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 41
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 42
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 43
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 44
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 45
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 46
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 47
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 48
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 49
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 50
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 51
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 52
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 53
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 54
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 55
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0x1FFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 56
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFE0, 0x007F, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 57
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFF80, 0x001F, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 58
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFE00, 0x0007, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 59
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFC3, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFC00, 0x0003, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 60
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xF800, 0x3FFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xF800, 0x0001, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 61
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xC000, 0x0FFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xF800, 0x0000, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 62
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0x8000, 0x03FF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xF000, 0x0000, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 63
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0x0000, 0x01FF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xE000, 0x0000, 0x7FFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 64
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFE, 0x0000, 0x00FF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xE000, 0x0000, 0x7FFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 65
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFC, 0x0000, 0x007F, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xC000, 0x0000, 0x7FFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 66
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFC, 0x0000, 0x003F, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xC000, 0x0000, 0x7FFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 67
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFF8, 0x0000, 0x001F, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xC000, 0x0000, 0x7FFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 68
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFF8, 0x0000, 0x000F, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xC000, 0x0000, 0x7FFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 69
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFF8, 0x0000, 0x000F, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0x8000, 0x0000, 0x7FFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 70
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFF0, 0x0000, 0x000F, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0x8000, 0x0000, 0x7FFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 71
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFF0, 0x0000, 0x0007, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0x8000, 0x0000, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 72
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFE0, 0x0000, 0x0007, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0x8000, 0x0000, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 73
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFE0, 0x0000, 0x0007, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0x8000, 0x0001, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 74
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFE0, 0x0000, 0x0007, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0x8000, 0x0001, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 75
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFE0, 0x0000, 0x0007, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0x8000, 0x0003, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 76
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFE0, 0x0000, 0x0007, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0x8000, 0x0003, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 77
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFE0, 0x0000, 0x0007, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0x8000, 0x0007, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 78
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFE0, 0x0000, 0x0007, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xC000, 0x000F, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 79
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFE0, 0x0000, 0x000F, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xC000, 0x001F, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 80
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFE0, 0x0000, 0x000F, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xE000, 0x007F, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 81
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFF0, 0x0000, 0x001F, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xF000, 0x01FF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 82
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFF0, 0x0000, 0x001F, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFC00, 0x07FF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 83
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFF8, 0x0000, 0x003F, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 84
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFC, 0x0000, 0x007F, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 85
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFE, 0x0000, 0x01FF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 86
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0x8000, 0x07FF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 87
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xF000, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 88
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 89
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 90
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 91
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 92
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 93
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 94
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 95
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 96
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 97
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 98
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 99
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 100
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 101
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 102
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 103
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 104
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 105
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 106
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 107
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 108
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 109
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0x87FF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 110
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0x03FF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 111
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFE, 0x01FF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 112
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFE, 0x01FF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 113
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFE, 0x01FF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 114
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFE, 0x01FF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 115
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0x03FF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 116
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0x87FF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 117
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 118
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 119
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 120
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 121
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 122
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 123
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 124
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 125
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 126
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 127
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 128
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 129
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xF9FF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 130
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xE07F, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 131
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xC03F, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 132
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0x801F, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 133
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0x000F, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 134
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0x000F, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 135
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0x000F, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 136
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0x000F, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 137
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0x0007, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 138
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0x0007, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFF83, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 139
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0x0007, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFE01, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 140
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0x0007, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFC00, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 141
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0x0003, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xF800, 0x7FFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 142
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0x0001, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xF000, 0x7FFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 143
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0x0001, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xE000, 0x7FFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 144
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0x8000, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xE000, 0x7FFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 145
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0x8000, 0x7FFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xC000, 0x7FFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 146
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xC000, 0x3FFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0x8000, 0x7FFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 147
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xC000, 0x1FFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0x8000, 0x7FFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 148
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xE000, 0x07FF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0x0000, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 149
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xF000, 0x03FF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFE, 0x0001, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 150
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xF000, 0x00FF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFC, 0x0001, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 151
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xF800, 0x003F, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFF0, 0x0003, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 152
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFC00, 0x001F, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFE0, 0x0007, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 153
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFE00, 0x000F, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFC0, 0x0007, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 154
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFF00, 0x0003, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFF00, 0x000F, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 155
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFF80, 0x0000, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFE00, 0x001F, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 156
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFC0, 0x0000, 0x3FFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFC00, 0x003F, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 157
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFE0, 0x0000, 0x0FFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xF800, 0x003F, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 158
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFF0, 0x0000, 0x03FF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xF000, 0x007F, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 159
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFC, 0x0000, 0x00FF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xE000, 0x00FF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 160
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFE, 0x0000, 0x003F, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xC000, 0x03FF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 161
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0x8000, 0x000F, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0x0000, 0x07FF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 162
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xE000, 0x0003, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFC, 0x0000, 0x1FFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 163
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xF000, 0x0000, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFF0, 0x0000, 0x3FFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 164
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFC00, 0x0000, 0x3FFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFC0, 0x0000, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 165
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFE00, 0x0000, 0x0FFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFF00, 0x0001, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 166
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFF80, 0x0000, 0x03FF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFC00, 0x0003, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 167
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFE0, 0x0000, 0x00FF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xE000, 0x0007, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 168
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFF8, 0x0000, 0x003F, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFE, 0x0000, 0x000F, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 169
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFE, 0x0000, 0x000F, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFE0, 0x0000, 0x001F, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 170
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0x8000, 0x0003, 0xFFFF, 0xFFFF, 0xFFFF, 0xFF80, 0x0000, 0x003F, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 171
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xE000, 0x0000, 0xFFFF, 0xFFFF, 0xFFFF, 0xFC00, 0x0000, 0x007F, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 172
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFC00, 0x0000, 0x3FFF, 0xFFFF, 0xFFFF, 0xF000, 0x0000, 0x01FF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 173
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFF00, 0x0000, 0x07FF, 0xFFFF, 0xFFFF, 0xC000, 0x0000, 0x03FF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 174
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFF80, 0x0000, 0x001F, 0xFFFF, 0xFFF8, 0x0000, 0x0000, 0x0FFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 175
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFE0, 0x0000, 0x0000, 0x1FFF, 0xA000, 0x0000, 0x0000, 0x7FFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 176
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFF8, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0001, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 177
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFE, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x000F, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 178
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0x8000, 0x0000, 0x0000, 0x0000, 0x0000, 0x003F, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 179
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xE000, 0x0000, 0x0000, 0x0000, 0x0000, 0x00FF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 180
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xF800, 0x0000, 0x0000, 0x0000, 0x0000, 0x0FFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 181
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFE00, 0x0000, 0x0000, 0x0000, 0x0000, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 182
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFF80, 0x0000, 0x0000, 0x0000, 0x0007, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 183
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFE0, 0x0000, 0x0000, 0x0000, 0x001F, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 184
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFC, 0x0000, 0x0000, 0x0000, 0x007F, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 185
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0x0000, 0x0000, 0x0000, 0x03FF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 186
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xF000, 0x0000, 0x0000, 0x1FFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 187
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFC0, 0x0000, 0x0007, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 188
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 189
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 190
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 191
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 192
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 193
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 194
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 195
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 196
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 197
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 198
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 199
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 200
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 201
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 202
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 203
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 204
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 205
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 206
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 207
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 208
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 209
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 210
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 211
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 212
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 213
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 214
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 215
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 216
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 217
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 218
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 219
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 220
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 221
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 222
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 223
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 224
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 225
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 226
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 227
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 228
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 229
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xF9FF, 0xFFBF, 0xEE00, 0xF87F, 0x07EF, 0xFC03, 0xFFFF, 0xFFFF,  // Line 230
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xF9FF, 0xFF9F, 0xCC00, 0xF01E, 0x01CF, 0xF801, 0xFFFF, 0xFFFF,  // Line 231
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xF9FF, 0xFF9F, 0xCCFF, 0xE79C, 0x78CF, 0xF9F8, 0xFFFF, 0xFFFF,  // Line 232
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xF9FF, 0xFF8F, 0x8CFF, 0xEFDC, 0xFCCF, 0xF9FC, 0xFFFF, 0xFFFF,  // Line 233
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0x09E1, 0xFFCF, 0x9CFF, 0xCFFC, 0xFFCF, 0xF9FC, 0xFFFF, 0xFFFF,  // Line 234
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFE, 0x01C0, 0x7FCF, 0x9CFF, 0xC83C, 0x7FCF, 0xF9F8, 0xFFFF, 0xFFFF,  // Line 235
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFC, 0xF19E, 0x7FE7, 0x3C01, 0xC01E, 0x07CF, 0xF801, 0xFFFF, 0xFFFF,  // Line 236
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFC, 0xF99F, 0x3FE7, 0x3C01, 0xC78F, 0xC1CF, 0xF803, 0xFFFF, 0xFFFF,  // Line 237
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFC, 0xF980, 0x3FE7, 0x3CFF, 0xCFCF, 0xFCCF, 0xF9FF, 0xFFFF, 0xFFFF,  // Line 238
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFC, 0xF99F, 0xFFF2, 0x7CFF, 0xCFCF, 0xFCCF, 0xF9FF, 0xFFFF, 0xFFFF,  // Line 239
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFC, 0xF99F, 0xFFF2, 0x7CFF, 0xCFCC, 0xFCCF, 0xF9FF, 0xFFFF, 0xFFFF,  // Line 240
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFC, 0xF19E, 0x3FF8, 0xFCFF, 0xE79C, 0x7CCF, 0xF9FF, 0xFFFF, 0xFFFF,  // Line 241
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFE, 0x01C0, 0x7FF8, 0xFC00, 0xF01E, 0x01E0, 0x09FF, 0xFFFF, 0xFFFF,  // Line 242
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0x09E0, 0xFFF8, 0xFE00, 0xF87F, 0x03E0, 0x0DFF, 0xFFFF, 0xFFFF,  // Line 243
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 244
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 245
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 246
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 247
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 248
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 249
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 250
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 251
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 252
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 253
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 254
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 255
+0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,  // Line 256
+};

examples/SerialTransceiver/SerialTransceiver.ino

@@ -17,6 +17,7 @@ Frequency      F<freq>;    Set the receive frequency in KHz, if offset is disabl
 CDCSS In       G<code>;    <code> must be a valid CDCSS code                                                                                                            No
 CDCSS Out      H<code>;    <code> must be a valid CDCSS code                                                                                                            No
 Print tones    I           Prints out all configured tones and codes, coma delimited in format: CTCSS In, CTCSS Out, CDCSS In, CDCSS Out                                No
+Morse Out      M<text>;    A small buffer for morse code (32 chars)
 Power level    P<level>;   Set the power amp level, 0 = lowest, 15 = highest                                                                                           No
 Enable Offset  R<state>;   1 turns on repeater offset mode, 0 turns off repeater offset mode                                                                            No
 Squelch        S<level>;   Set the squelch level                                                                                                                        No
@@ -46,7 +47,11 @@ Debug Msg    @<text>;   32 character debug message
 */
 
 #include "Wire.h"
-#include "HAMShield.h"
+#include "HamShield.h"
+
+#define PWM_PIN 3
+#define RESET_PIN A3
+#define SWITCH_PIN 2
 
 int state;
 int txcount = 0;
@@ -62,11 +67,22 @@ int cdcssin = 0;
 int cdcssout = 0;
 
 
-HAMShield radio;
+HamShield radio;
 
 
 
 void setup() {
+  // NOTE: if not using PWM out, it should be held low to avoid tx noise
+  pinMode(PWM_PIN, OUTPUT);
+  digitalWrite(PWM_PIN, LOW);
+  
+  // prep the switch
+  pinMode(SWITCH_PIN, INPUT_PULLUP);
+  
+  // set up the reset control pin
+  pinMode(RESET_PIN, OUTPUT);
+  digitalWrite(RESET_PIN, HIGH);
+  
   Serial.begin(115200);
   Serial.print(";;;;;;;;;;;;;;;;;;;;;;;;;;");
   Wire.begin();
@@ -81,7 +97,7 @@ void setup() {
   radio.setVolume2(0xF);
   radio.setModeReceive();
   radio.setTxSourceMic();
-  radio.setRfPower(9);
+  radio.setRfPower(0);
   radio.setSQLoThresh(80);
   radio.setSQOn();
 }
@@ -103,8 +119,7 @@ void loop() {
            
            case 32:  // space - transmit
                if(repeater == 1) { radio.frequency(tx); } 
-               radio.setRX(0);
-               radio.setTX(1);
+               radio.setModeTransmit();
                state = 10;
                Serial.print("#TX,ON;");
                timer = millis();
@@ -136,6 +151,14 @@ void loop() {
                freq = atol(cmdbuff);
                if(radio.frequency(freq) == true) { Serial.print("@"); Serial.print(freq,DEC); Serial.print(";!;"); } else { Serial.print("X1;"); } 
                break;
+
+           case 'M':
+               getValue();
+               radio.setModeTransmit();
+               delay(300);
+               radio.morseOut(cmdbuff);
+               state = 10;
+               break; 
                
            case 80: // P - power level
                getValue();
@@ -172,7 +195,7 @@ void loop() {
 
   }
       if(state == 10) { 
-    if(millis() > (timer + 500)) { Serial.print("#TX,OFF;");radio.setRX(1); radio.setTX(0); if(repeater == 1) { radio.frequency(freq); }  state = 0; txcount = 0; }
+    if(millis() > (timer + 500)) { Serial.print("#TX,OFF;");radio.setModeReceive(); if(repeater == 1) { radio.frequency(freq); }  state = 0; txcount = 0; }
     }
 }
 

examples/SignalTest/SignalTest.ino

@@ -14,6 +14,10 @@ Plays back the current signal strength level and morses out it's call sign at th
 #include <Wire.h>
 #include <PCM.h>
 
+#define PWM_PIN 3
+#define RESET_PIN A3
+#define SWITCH_PIN 2
+
 HAMShield radio;
 int16_t rssi;
 int peak = -150;
@@ -73,14 +77,25 @@ const unsigned char dbm[] PROGMEM = {
 
 /* get our radio ready */
 
-void setup() { 
+void setup() {
+  // NOTE: if not using PWM out, it should be held low to avoid tx noise
+  pinMode(PWM_PIN, OUTPUT);
+  digitalWrite(PWM_PIN, LOW);
+  
+  // prep the switch
+  pinMode(SWITCH_PIN, INPUT_PULLUP);
+  
+  // set up the reset control pin
+  pinMode(RESET_PIN, OUTPUT);
+  digitalWrite(RESET_PIN, HIGH);
+  
   Wire.begin();
   Serial.begin(9600);
   Serial.print("Radio status: ");
   int result = radio.testConnection();
   Serial.println(result);
   radio.initialize();
-  radio.setFrequency(446000);
+  radio.frequency(446000);
   radio.setVolume1(0xF);
   radio.setVolume2(0xF);
   radio.setModeReceive();
@@ -104,7 +119,7 @@ void loop() {
      
    if(rssi < -120) { 
      Serial.println("Transmit On");
-     radio.setTX(1);
+     radio.setModeTransmit();
      delay(250);
      tone(11,1000,500); 
      delay(1000);
@@ -131,9 +146,8 @@ void loop() {
      delay(1000);
      Serial.println("done!");
      radio.morseOut(CALLSIGN);
-     radio.setTX(0);
-     Serial.println("Transmit off");
      radio.setModeReceive();
+     Serial.println("Transmit off");
      delay(1000);
    }
 }