This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.
How to Create an Official PicoCalc SD Card
The purpose of this wiki is to document the partitioning and creation process of the official PicoCalc SD card.
⚠ Warning: This process involves disk partitioning and formatting, which may result in data loss if performed incorrectly. Do not proceed unless you have sufficient experience with Linux system administration.
We are not responsible for any data loss or damage caused by improper use of these instructions. Proceed at your own risk.
Script
#!/bin/bash
DEVICE="/dev/$1"
if [ -z "$DEVICE" ]; then
echo "No disk"
exit 1
fi
if [ ! -b "$DEVICE" ]; then
echo "$DEVICE not existed"
exit 1
fi
echo "Warn: $DEVICE will be destroyed and all data on this disk will be lost,Do you want to continue?"
read -p "Confirm？(y/n) " confirm
if [ "$confirm" != "y" ]; then
echo "Canceled"
exit 1
fi
echo "Begin partition..."
# use parted to create msdos partition table
echo "Create msdos partition table..."
parted "$DEVICE" mklabel msdos
TOTAL_SIZE=$(lsblk -bno SIZE "$DEVICE")
SIZE_MB=$(( TOTAL_SIZE / 1024 / 1024 ))
PART1_SIZE=$(( SIZE_MB - 32 ))
echo "Create first partition in size ${PART1_SIZE}MB, FAT32..."
parted "$DEVICE" mkpart primary fat32 1MiB ${PART1_SIZE}MiB
sleep 2
echo "Format first partition FAT32..."
mkfs.fat -F32 -v -I "${DEVICE}1"
echo "Create second partition in size 32MB..."
parted "$DEVICE" mkpart primary ${PART1_SIZE}MiB 100%
echo "All done："
fdisk -l "$DEVICE"
How to Use the Script
- Insert a blank SD card into your computer.
- Run the script:
sudo ./partition_usb_32mb.sh sdb
(Replace "sdb" with the correct device name for your SD card.)
BE CAREFUL ABOUT THIS
BE CAREFUL ABOUT THIS
BE CAREFUL ABOUT THIS
If you are not careful, all the original data on the disk will be destroyed.
This script prepares the SD card for PicoMite, uLisp, NES emulators, and other Pico firmware using the fatfs library.
Additionally, FUZIX can use /dev/sdb2 (32MB partition) as its root filesystem, as FUZIX supports a maximum partition size of 32MB.
Flashing the FUZIX 32MB Image
-
Download the FUZIX image:
PicoCalc_Fuzix_v1.0.img -
Flash the image to the second partition:
sudo dd if=filesystem.img of=/dev/sdb2
Example Partition Layout
After running the script, your SD card should have the following partition structure:
Disk /dev/sdb: 59.48 GiB, 63864569856 bytes, 124735488 sectors
Disk model: STORAGE DEVICE
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x66a93eb2
Device Boot Start End Sectors Size Id Type
/dev/sdb1 2048 124669951 124667904 59.4G c W95 FAT32 (LBA)
/dev/sdb2 124669952 124735487 65536 32M 83 Linux
Now your SD card is ready for PicoCalc, FUZIX, and other supported firmware!